Makita DBN500ZJ Handleiding

Makita Nietmachine DBN500ZJ

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita DBN500ZJ (12 pagina's) in de categorie Nietmachine. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/12
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
IMPORTANT: Read Before Using.
Cordless Brad Nailer
DBN500
014580
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model DBN500
Brad nail size 18 Ga x 15, 20, 25, 30, 32, 35, 38, 40, 45, 50 mm
Brad nail magazine capacity 100 pcs
Dimensions (L x W x H) 294 mm x 97 mm x 318 mm
Rated voltage D.C. 18 V
Net weight 3.3 kg 3.5 kg
Standard battery cartridges BL1815 / BL1815N /
BL1820 / BL1820B
BL1830 / BL1840 / BL1840B /
BL1850 / BL1850B
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END311-1
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
ï½¥ Read instruction manual.
ï½¥ Wear safety glasses.
ï½¥ Do not use on scaffoldings, ladders.
ï½¥ Keep fingers away from trigger when
not driving fasteners to avoid accidental
firing.
ï½¥ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws,
electric equipment and batteries and
battery pack(s) that have reached the
end of their life must be collected
separately and returned to an
environmentally compatible recycling
facility.
ENE073-1
Intended use
The tool is intended for fastening on interior work and
furniture work.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Sound pressure level (L
pA) : 79 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG904-2
Vibration
The vibration total value determined according to
EN60745:
Vibration emission (ah) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
Cd
Ni-MH
Li-ion
3
ENH003-15
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Cordless Brad Nailer
Model No./ Type: DBN500
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60745, EN792
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
28.4.2015
000331
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
GEA006-2
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an
GFCI reduces the risk of electric shock.
Personal safety
10. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
11. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
12. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools
with your finger on the switch or energising power
tools that have the switch on invites accidents.
13. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
14. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
15. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving
parts.

Product specificaties

Merk: Makita
Categorie: Nietmachine
Model: DBN500ZJ

Heb je hulp nodig?

Als je hulp nodig hebt met Makita DBN500ZJ stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Nietmachine Makita

Makita

Makita AF506 Handleiding

10 Juni 2023
Makita

Makita AT2550A Handleiding

9 Juni 2023
Makita

Makita DBN600ZJ Handleiding

9 Juni 2023
Makita

Makita AN613 Handleiding

3 Juni 2023
Makita

Makita T221DW Handleiding

2 Juni 2023
Makita

Makita T221D Handleiding

22 Mei 2023
Makita

Makita GN900 Handleiding

20 Mei 2023
Makita

Makita 242077-1 Handleiding

13 Mei 2023
Makita

Makita 242094-1 Handleiding

21 April 2023
Makita

Makita AN911H Handleiding

15 April 2023

Handleiding Nietmachine

Nieuwste handleidingen voor Nietmachine

Whirlpool

Whirlpool YWEE515S0LV Handleiding

3 December 2024
Whirlpool

Whirlpool YWEE515S0LB Handleiding

3 December 2024
MSW

MSW -STAPLER 1500 Handleiding

15 Oktober 2024
Abac

Abac G-301 Handleiding

27 Augustus 2024
Ryobi

Ryobi P322 Handleiding

15 Juli 2024
Ryobi

Ryobi P318 Handleiding

15 Juli 2024
Ryobi

Ryobi P317 Handleiding

15 Juli 2024
Ryobi

Ryobi P739 Handleiding

15 Juli 2024
Ryobi

Ryobi P330 Handleiding

15 Juli 2024
Ryobi

Ryobi P360 Handleiding

15 Juli 2024