Makita BDF452HW Handleiding

Makita Boormachine BDF452HW

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita BDF452HW (28 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 63 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/28

I N S T R U C T I O N M A N U A L

M A N U E L D ' I N S T R U C T I O N

M A N U A L D E I N S T R U C C I O N E S

WARNING:

For your personal safety, READ and UNDERSTAND before using.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

AVERTISSEMENT:

Pour votre propre sécurité, prière de lire attentivement avant l’utilisation.

GARDER CES INSTRUCTIONS POUR RÉFÉRENCE ULTÉRIEURE.

ADVERTENCIA:

Para su seguridad personal, LEA DETENIDAMENTE este manual antes de usar la herramienta.

GUARDE ESTAS INSTRUCCIONES PARA FUTURA REFERENCIA.

Cordless Driver Drill

Perceuse-visseuse sans fil

Atornillador Taladro Inalámbrico

BDF452

007417

ENGLISH

SPECIFICATIONS

• Due to our continuing programme of research and development, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

GENERAL SAFETY RULES

GEA002-3

WARNING:

Read all instructions. Failure to follow all

instructions listed below may result in elec-

tric shock, fire and/or serious injury. The

term “power tool” in all of the warnings listed

below refers to your mains-operated

(corded) power tool or battery-operated

(cordless) power tool.

SAVE THESE INSTRUCTIONS

Work area safety

1. Keep work area clean and well lit. Cluttered and

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

3. Keep children and bystanders away while oper-

ating a power tool. Distractions can cause you to

lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase the

risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

8. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of

electric shock.

Personal safety

9. Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the influence of drugs, alcohol or medication. A

moment of inattention while operating power tools

may result in serious personal injury.

10. Use safety equipment. Always wear eye protec-

tion. Safety equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used

for appropriate conditions will reduce personal inju-

ries.

Model BDF452

Capacities

Steel 13 mm (1/2”)

Wood 38 mm (1-1/2”)

Wood screw 10 mm x 89 mm (3/8” X 3-1/2”)

Machine screw M6 (1/4”)

No load speed (RPM)

High (2) 0 - 1,500/min.

Low (1) 0 - 400/min.

Overall length 203 mm (8”)

Net weight

(with batttery cartridge BL1815) 1.6 kg (3.5 lbs)

(with batttery cartridge BL1830) 1.8 kg (3.9 lbs)

Rated voltage D.C. 18 V

Standard battery cartridge BL1815/BL1830

11. Avoid accidental starting. Ensure the switch is in

the off-position before plugging in. Carrying

power tools with your finger on the switch or plug-

ging in power tools that have the switch on invites

accidents.

12. Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

result in personal injury.

13. Do not overreach. Keep proper footing and bal-

ance at all times. This enables better control of the

power tool in unexpected situations.

14. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing, and gloves

away from moving parts. Loose clothes, jewellery

or long hair can be caught in moving parts.

15. If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

these devices can reduce dust-related hazards.

Power tool use and care

16. Do not force the power tool. Use the correct

power tool for your application. The correct power

tool will do the job better and safer at the rate for

which it was designed.

17. Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must be

repaired.

18. Disconnect the plug from the power source and/

or the battery pack from the power tool before

making any adjustments, changing accessories,

or storing power tools. Such preventive safety

measures reduce the risk of starting the power tool

accidentally.

19. Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with

the power tool or these instructions to operate

the power tool. Power tools are dangerous in the

hands of untrained users.

20. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and

any other condition that may affect the power

tools operation. If damaged, have the power tool

repaired before use. Many accidents are caused by

poorly maintained power tools.

21. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

22. Use the power tool, accessories and tool bits

etc. in accordance with these instructions and in

the manner intended for the particular type of

power tool, taking into account the working con-

ditions and the work to be performed. Use of the

power tool for operations different from those

intended could result in a hazardous situation.

Battery tool use and care

23. Ensure the switch is in the off position before

inserting battery pack. Inserting the battery pack

into power tools that have the switch on invites acci-

dents.

24. Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one

type of battery pack may create a risk of fire when

used with another battery pack.

25. Use power tools only with specifically desig-

nated battery packs. Use of any other battery

packs may create a risk of injury and fire.

26. When battery pack is not in use, keep it away

from other metal objects like paper clips, coins,

keys, nails, screws, or other small metal objects

that can make a connection from one terminal to

another. Shorting the battery terminals together

may cause burns or a fire.

27. Under abusive conditions, liquid may be ejected

from the battery, avoid contact. If contact acci-

dentally occurs, flush with water. If liquid con-

tacts eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation or

burns.

Service

28. Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

29. Follow instruction for lubricating and changing

accessories.

30. Keep handles dry, clean and free from oil and

grease.

SPECIFIC SAFETY RULES

GEB001-2

DO NOT let comfort or familiarity with

product (gained from repeated use)

replace strict adherence to drill safety

rules. If you use this power tool unsafely

or incorrectly, you can suffer serious per-

sonal injury.

1. Use auxiliary handles supplied with the tool.

Loss of control can cause personal injury.

2. Hold power tools by insulated gripping surfaces

when performing an operation where the cutting

tool may contact hidden wiring or its own cord.

Contact with a “live” wire will make exposed metal

parts of the tool “live” and shock the operator.

3. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

Product specificaties

Merk:	Makita
Categorie:	Boormachine
Model:	BDF452HW
Kleur van het product:	Black, White
Diepte:	203 mm
Stroombron:	Batterij/Accu
Accu/Batterij voltage:	18 V
Inactieve snelheid (1ste versnelling):	400 RPM
Inactieve snelheid (2e versnelling):	1500 RPM
Boor diameter in staal (max):	13 mm
Boor diameter in hout (max):	38 mm
Aantal versnellingen:	2
Opbergetui:	Ja
Reverse:	Ja
Ingebouwd licht:	Ja
Boren:	Ja
Schroefdraad booras:	1/2"
Schroefdiameter:	6.1 mm
Inclusief batterij:	Ja
Extra handgreep:	Ja
Aantal inbegrepen batterijen:	1 stuk(s)
Schroevendraaier bit:	Ja
Boorstift inbegrepen:	Ja
Productontwerp:	Boormachine met pistoolgreep
Batterijtechnologie:	Lithium-Ion (Li-Ion)
Type batterij:	BL1815/BL1830