Makita BDA341RFX Handleiding

Makita Boormachine BDA341RFX

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita BDA341RFX (36 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/36

GB Cordless Angle Drill

Instruction Manual

F Perceuse d’angle sans fil

Manuel d’instructions

D Akku-Winkelbohrmaschine

Betriebsanleitung

I Trapano ad angolo a batteria

Istruzioni per l’uso

NL Haakse boormachine snoerloze

Gebruiksaanwijzing

E Taladro en ángulo sin cable

Manual de instrucciones

Berbequim angular a bateria Manual de instruções

Batteridrevet vinkelboremaskine Brugsanvisning

GR Φορητ γωνιακ τρυπάνι Οδηγίες χρήσεως

BDA341

BDA351

1 2

3 4

5 6

7 8

ENGLISH

Explanation of general view

1 Button

2 Red part

3 Battery cartridge

4 Switch trigger

5 Lamp

6 Reversing switch

7 Sleeve

8 Groove

9 Hook

10 Screw

SPECIFICATIONS

Model BDA341 BDA351

Capacities

Steel ......................................................................................... 10mm 10mm

Wood ........................................................................................ 25mm 25 mm

No load speed (min–1) ................................................................. 0 – 1,700 0 – 1,800

Overall length .............................................................................. 326 mm 326 mm

Net weight .................................................................................... 1.6 kg 1.7 kg

Rated voltage .............................................................................. D.C. 14.4 V D.C. 18V

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

Intended use

The tool is intended for drilling in wood, metal and plastic.

Safety hints

For your own safety, please refer to the enclosed safety

instructions.

SPECIFIC SAFETY RULES

GEB002-2

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to drill safety rules. If you use this power tool

unsafely or incorrectly, you can suffer serious per-

sonal injury.

1. Hold tool by insulated gripping surfaces when

performing an operation where the cutting tools

may contact hidden wiring or its own cord.

Contact with a “live” wire will make exposed metal

parts of the tool “live” and shock the opeator.

2. Always be sure you have a firm footing.

Be sure no one is below when using the tool in high

locations.

3. Hold the tool firmly.

4. Keep hands away from rotating parts.

5. Do not leave the tool running. Operate the tool

only when hand-held.

6. Do not touch the drill bit or the workpiece imme-

diately after operation; they may be extremely

hot and could burn your skin.

7. Some material contains chemicals which may be

toxic. Take caution to prevent dust inhalation

and skin contact. Follow material supplier safety

data.

SAVE THESE INSTRUCTIONS.

WARNING:

MISUSE or failure to follow the safety rules stated in

this instruction manual may cause serious personal

injury.

IMPORTANT SAFETY INSTRUCTIONS

FOR BATTERY CARTRIDGE

ENC007-2

1. Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using bat-

tery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

4. If electrolyte gets into your eyes, rinse them out

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any conduc-

tive material.

(2) Avoid storing battery cartridge in a container

with other metal objects such as nails, coins,

etc.

(3) Do not expose battery cartridge to water or

rain.

A battery short can cause a large current flow, over-

heating, possible burns and even a breakdown.

6. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50°C (122°F).

7. Do not incinerate the battery cartridge even if it

is severely damaged or is completely worn out.

The battery cartridge can explode in a fire.

8. Be careful not to drop or strike battery.

SAVE THESE INSTRUCTIONS.

Tips for maintaining maximum battery life

1. Charge the battery cartridge before completely

discharged.

Always stop tool operation and charge the bat-

tery cartridge when you notice less tool power.

2. Never recharge a fully charged battery cartridge.

Overcharging shortens the battery service life.

3. Charge the battery cartridge with room tempera-

ture at 10°C – 40°C (50°F – 104°F). Let a hot bat-

tery cartridge cool down before charging it.

Product specificaties

Merk:	Makita
Categorie:	Boormachine
Model:	BDA341RFX
Gewicht:	1600 g
Stroombron:	Batterij/Accu
Oplaadtijd:	22 min
Accu/Batterij voltage:	14.4 V
Boor diameter in staal (max):	10 mm
Boor diameter in hout (max):	25 mm
Boorhouder:	Zonder sleutel
Boren:	Ja
Schroeven:	Ja
Inclusief batterij:	Ja
Batterij capaciteit:	3 Ah
Productontwerp:	Haakse boormachine
Batterijtechnologie:	Lithium-Ion (Li-Ion)