Makita 6381DWAE Handleiding

Makita Boormachine 6381DWAE

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita 6381DWAE (40 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/40

Cordless Driver Drill Instruction Manual

Perceuse-visseuse sans fil Manuel d’instructions

Akku-Bohrschrauber Betriebsanleitung

Trapano-avvitatore a batteria Istruzioni per l’uso

Snoerloze boor-/schroevendraaier Gebruiksaanwijzing

Taladro-atornillador a batería Manual de instrucciones

Berbequim aparafusador a bateria Manual de instruções

Akku bore-skruemaskine Brugsanvisning

GR Βιδοτρύπανο με μπαταρία Οδηγίες χρήσεως

6261D

6271D

6281D

6381D

6391D

1 2

3 4

5 6

ENGLISH (Original instructions)

Explanation of general view

1 Button

2 Battery cartridge

3 Switch trigger

4 Reversing switch lever

5 Low speed

6 High speed

7 Speed change lever

8 Graduations

9 Adjusting ring

10 Drill marking

11 Pointer

12 Sleeve

SPECIFICATIONS

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Specifications and battery cartridge may differ from

country to country.

• Weight, with battery cartridge, according to EPTA-Pro-

cedure 01/2003

Intended use

The tool is intended for drilling and screw driving in wood,

metal and plastic.

GEA010-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for future refer-

ence.

GEB001-4

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to drill safety rules. If you use this power tool

unsafely or incorrectly, you can suffer serious per-

sonal injury.

1. Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

2. Hold power tools by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring or its own

cord. Cutting accessory contacting a “live” wire may

make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

3. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

4. Hold the tool firmly.

5. Keep hands away from rotating parts.

6. Do not leave the tool running. Operate the tool

only when hand-held.

7. Do not touch the drill bit or the workpiece imme-

diately after operation; they may be extremely

hot and could burn your skin.

8. Some material contains chemicals which may be

toxic. Take caution to prevent dust inhalation

and skin contact. Follow material supplier safety

data.

SAVE THESE INSTRUCTIONS.

WARNING:

MISUSE or failure to follow the safety rules stated in

this instruction manual may cause serious personal

injury.

ENC004-1

IMPORTANT SAFETY INSTRUCTIONS

FOR BATTERY CARTRIDGE

1. Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using bat-

tery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

4. If electrolyte gets into your eyes, rinse them out

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

5. Always cover the battery terminals with the bat-

tery cover when the battery cartridge is not

used.

6. Do not short the battery cartridge:

(1) Do not touch the terminals with any conduc-

tive material.

Model 6261D 6271D 6281D 6381D 6391D

Capacities

Steel 10 mm 10 mm 10 mm 13 mm 13 mm

Wood 21 mm 25 mm 25 mm 25 mm 36 mm

Wood screw 5.1 mm x 38 mm 5.1 mm x 63 mm 6 mm x 75 mm

Machine screw 6 mm

No load speed

(min-1)

High 0 – 1,300

Low 0 – 400

Overall length 192 mm 200 mm 216 mm

Net weight 1.5 kg 1.5 kg 1.6 kg 1.7 kg 2.0 kg

Rated voltage D.C. 9.6 V D.C. 12 V D.C. 14.4 V D.C. 14.4 V D.C. 18 V

Product specificaties

Merk:	Makita
Categorie:	Boormachine
Model:	6381DWAE
Gewicht:	1700 g
Breedte:	94 mm
Diepte:	200 mm
Hoogte:	243 mm
Stroombron:	Batterij/Accu
Oplaadtijd:	45 min
Accu/Batterij voltage:	14.4 V
Inactieve snelheid (1ste versnelling):	400 RPM
Inactieve snelheid (2e versnelling):	1300 RPM
Boor diameter in staal (max):	13 mm
Boor diameter in hout (max):	25 mm
Boorhouder:	Zonder sleutel
Boren:	Ja
Schroeven:	Ja
Maximale koppel (zachte applicaties):	20 Nm
Schroefdiameter:	63 mm
Maximale koppel (harde applicaties):	36 Nm
Inclusief batterij:	Ja
Batterij capaciteit:	1.9 Ah
Aantal inbegrepen batterijen:	2 stuk(s)
Productontwerp:	Boormachine met pistoolgreep
Batterijtechnologie:	Nikkel-Cadmium (NiCd)