Makita 6271D Handleiding

Makita Boormachine 6271D

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita 6271D (36 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 75 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/36

INSTRUCT ON MANUALI AND WARRANTY

IMPORTANT THINGS TO KNOW

Screw Down Crowns: Many Invicta watches are equipped with a screw

down crown to help prevent water inﬁltration. This is most common on our

Diver models. In order to adjust the date and/or time on such a watch,

you must ﬁrst unscrew the crown before you can gently pull it out to its

ﬁrst or second click stop position (page 3). To do this, simply rotate the

crown counterclockwise until it springs open. When you have ﬁnished

setting the watch, the crown must then be pushed in and screwed back

in tightly. Not doing so will cancel the water resistance of the watch

and will void all warranties from the manufacturer. Overall, this process

should not require a lot of effort or force.

Tritnite® Luminous Markers: Tritnite® is an environmentally friendly

luminous material used exclusively by Invicta. Tritnite® requires 4 –5 hours

of exposure to light for it to glow brightly in the dark. It will continue to

perform with regular exposure to light.

THANK YOU FOR CHOOSING AN I TNVIC A TIMEPIECE

Long ago, we set out to continue Invicta’s original 1837 mission – to offer

magniﬁcent Swiss timepieces at modest prices. In doing so, we gave birth

to a movement in the watch industry that is turning the balance of power

over to the consumer.

We hope you enjoy your new timepiece and carefully read the easy-to-use

instructions pertaining to it. By doing so, you will help give it a long life and

keep it operating at the high quality standards by which it was crafted.

These timepieces have been tested for water resistance. In order to maintain

the water resistance, be sure to always close the crown tightly after setting.

We also recommend having your timepiece checked every year by a certiﬁed

watchmaker to ensure the gaskets are in proper condition. This will help to

assure the precise operation and longevity of the piece. Please refer to our

Service Center information on our web site www.invictawatch.com.

QUARTZ, A M IC, UTO AT AND MANUAL W D WATIN CHES

Display Elements Control Buttons

QUARTZ, A M IC, UTO AT AN IND W MANUAL D WATCHES

A Quartz Watch is battery powered and does not require winding.

Eventually the battery will need to be replaced.

An Automatic Watch is a mechanical watch that winds itself and does

not require a battery. When worn daily, the movement of your wrist causes

the mainspring to wind progressively, eliminating the need for additional

winding. To start your automatic, you can hand wind it by rotating the

crown clockwise a number of turns while in its normal operating position

(screw down crowns will need to be unscrewed ﬁrst), or by swinging it side

to side for 30 seconds. We recommend housing an automatic in a watch

winder box.

A Manual Wind Watch is a mechanical watch that does not require a

battery, but can only be wound by hand. To wind it, turn the crown clock-

wise while it is in its normal operating position until you feel resistance.

This type of watch should be wound daily.

Product specificaties

Merk:	Makita
Categorie:	Boormachine
Model:	6271D
Kleur van het product:	Black,Blue,Yellow
Gewicht:	1500 g
Stroombron:	Batterij/Accu
Accu/Batterij voltage:	12 V
Soft grip:	Ja
Inactieve snelheid (1ste versnelling):	400 RPM
Inactieve snelheid (2e versnelling):	1300 RPM
Boor diameter in staal (max):	10 mm
Boor diameter in hout (max):	25 mm
Boorhouder:	Zonder sleutel
Ingebouwd licht:	Nee
Spanklauw breedte (min):	76.2 mm
Spanklauw breedte (max):	203.2 mm
Schroefdiameter:	12 mm
Productontwerp:	Boormachine met pistoolgreep
Batterijtechnologie:	Nikkel-Cadmium (NiCd)
Maximumkoppel:	250 inch-pounds