LYYT LT12560-RD Handleiding

LYYT Niet gecategoriseerd LT12560-RD

Lees hieronder de đź“– handleiding in het Nederlandse voor LYYT LT12560-RD (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
SINGLE COLOUR LED TAPE
Installation Guide
Stock code
Voltage
Colour
Luminous flux
(Lumens per metre)
Light intensity per LED
(millicandelas)
156.704UK
12Vdc
UV
540lm/m
5000mcd
156.705UK
12Vdc
Red
60lm/m
600mcd
156.706UK
12Vdc
Pink
120lm/m
1000m cd
156.708UK
12Vdc
Green
130lm/m
1200mcd
156.711UK
12Vdc
Blue
30lm/m
500mcd
156.714UK
12Vdc
Yellow
45lm/m
600mcd
156.715 UK
12Vdc
Cool white (6500K)
720lm/m
3996mcd
156.716 UK
12Vdc
Warm white (2700K)
720lm/m
3996mcd
156.755UK
24Vdc
Red
60lm/m
600mcd
156.756UK
24Vdc
Pink
120lm/m
1000mcd
156.758UK
24Vdc
Green
130lm/m
1200mcd
156.761UK
24Vdc
Blue
30lm/m
500mcd
156.764UK
24Vdc
Yellow
45lm/m
600mcd
156.765 UK
24Vdc
Cool white (6500K)
720lm/m
3996mcd
156.766 UK
24Vdc
Warm white (2700K)
720lm/m
3996mcd
Common Specifications
Number of LEDs
Beam angle
Cut intervals
Reel length
LED type
LED spacing
IP rating
Power consumption / metre
Cross-section
Weight
Single Col r LED Tape Installation Guide ou
Caution: Please read this guide carefully before installing Lyyt LED tape
Damage caused by incorrect application is not covered by the rranty wa
Lyyt single colour LED tape is supplied on 5m reels in either 12Vdc or 24Vdc voltages.
Installation should be carried out by competent electrical installers, observing the relevant electrical safety procedures.
Lyyt single colour LED tape has a self-adhesive backing to allow it to be easily attached to a clean, non-porous surface.
Where less than 5m of tape is needed, there are solder points as shown below, where the tape may be cut to size. These
cut points will be at 5cm intervals for 12V tape and 10cm intervals for 24V tape. In order to re-connect to another length
of tape after cutting, strip a y the epoxy coating at the solder points and solder a wire from “+” to “+” and a wire from wa
“-” to “-” as shown below. Some accessories are supplied with the tape reel for this purpose. In order to retain weather-
proofing, it is advised to seal the cuts and joints with silicone glue.
Ea 5m reel of single colour LED tape is fi ed with a 2.1 DC jack socket for po r input for easy connection to a ch tt mm we
power supply. This connector may be removed and stripped for bare wire co ection if a 2.1 jack is not fitted to the nn mm
power supply.
If the power supply has enough capacity to po r more than one reel, another r l can be co ected to the end of the we ee nn
first reel via the 2.1 DC jack plug mm . (Except for the 12V UV tape)
For 12V single colour LED tape, it is recommended to link no more than 15m of tape in sequence. For 24V versions, up to
30m can be linked in this way. Using a separate wire to loop “+” and “-” back to the power supply will help to avoid
dimming at the far end through voltage drop. To connect beyond these lengths, a parallel wire must be run from the
powe supply to the further reels of tape r . The UV tape will require seperate power supply to each 5m reel.
It is imperative that the power supply should have higher than the rated capacity in Amps (A) for the current required to
power the length(s) of LED tape installed. Please s the table below for reference. ee
5m
10m
15m
20m
25m
30m
Current for 12V tape
2A
4A
6A
8A
10A
12A
Current for 24V tape
1A
2A
3A
4A
5A
6A
Please visit to select from our range of 12Vdc and 24Vdc power supplies that are suitable for powering www.avsl.com
Lyyt LED tapes.
Disp al:os The “Crossed Wheelie Bin” symbol on e product means at e product is classed as E ctrical or th th th le
E ctronic equip nt and sh ld not be disposed with other h sehold or co ercial waste at e end its useful fe. le me ou ou mm th of li
The g ds must be disposed of according to r cal co cil guidelines. oo you lo un
Errors and omissions excepted.
Copyright 20 Ltd. © 20. AVSL Group
Tape Length
Current for UV tape 3.5A

Product specificaties

Merk: LYYT
Categorie: Niet gecategoriseerd
Model: LT12560-RD

Heb je hulp nodig?

Als je hulp nodig hebt met LYYT LT12560-RD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd LYYT

LYYT

LYYT CLIP10-B Handleiding

5 Januari 2024
LYYT

LYYT DIY-CW60 Handleiding

5 Juli 2023
LYYT

LYYT PS30-24 Handleiding

23 Juni 2023
LYYT

LYYT LT24560-BL Handleiding

20 Juni 2023
LYYT

LYYT DIY-B60 Handleiding

19 Juni 2023
LYYT

LYYT DIYH-RGB30 Handleiding

16 Juni 2023
LYYT

LYYT LT12560-WW Handleiding

15 Juni 2023
LYYT

LYYT PS40 Handleiding

15 Juni 2023
LYYT

LYYT RGB10-F Handleiding

15 Juni 2023
LYYT

LYYT LT12560-CW Handleiding

14 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024
Trace Elliot

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024
Kramer

Kramer K-Bar Camera Bracket Handleiding

26 November 2024
Kramer

Kramer RK-19 Handleiding

26 November 2024
Kramer

Kramer OSP-MM1 Handleiding

26 November 2024
Kramer

Kramer ASPEN-1616UX Handleiding

26 November 2024
Korg

Korg Pitchstrap Handleiding

26 November 2024
NeoMounts

NeoMounts WL70-450BL11 Handleiding

26 November 2024
Kramer

Kramer CLS-AOCH/60 Handleiding

26 November 2024
Klauke

Klauke EKM 6022ISM Handleiding

26 November 2024