LYYT ISRF1 Handleiding

LYYT Controller ISRF1

Lees hieronder de 📖 handleiding in het Nederlandse voor LYYT ISRF1 (2 pagina's) in de categorie Controller. Deze handleiding was nuttig voor 99 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

ISRF1

IN-LINE WIRELESS CONTROLLER

FOR SINGLE COLOUR LED TAPE

Item ref: 153.796UK

User Manual

WARNING: This product intended for professional installation of single colour LED tape and should be is

connected by qualified personnel in accordance with electrical safety standards. Ensure that the rated load

indicated is not exceeded.

Installation

The IS 1 controller can be employed to control single colour LED tape operating from a RF

5-24Vdc power supply. Maximum short term current load is rated at 12A.

For constant full power output, it is advised to limit this to 6A load.

For Lyyt single colour LED tape (156.705-1 6. 68UK), is recommended to connect no 5 7 it

more than 3 5m tapes radially from the same controller. When connecting more than one x

5m tape in this way, it will be necessary to remove the connectors and strip the wires for DC

connec using termina strips. I is also advised to use bypass wiring instead o connecting tion l t f

end- -end to avoid noticeable voltage drop at the furthes end fro the powe supply. to t m r

153.796 User Manual UK

Remote control

1. POWER LED on / standby button

2. LIGHT switches from pattern to static light mode

3. 100% sets static light brightness to 100%

4. MODE+ steps upwards through modes

5. SPEED- reduces speed of pattern

6. MODE- steps downwards through modes

7. BRIGHT+ increases brightness

8. BRIGHT- decreases brightness

9. 50% sets static light brightness to 50%

10. 25% sets static light brightness to 25%

11. SPEED+ increases speed of pattern



Remove the clear tab from the handheld remote to engage the battery (replacement CR2025 button cell)



To switch LEDs on, press the POWER button (from standby, the last setting is resumed)



If there is no response from the handset, it may be necessary to pair the handset to the controller (see “ ” below)Pairing



MODE+ and - buttons step through the 8 preset programmes in sequence (shown below)



SPEED+ or - will alter the rate of change in the selected mode



LIGHT button overrides the pattern mode to give a static light setting



BRIGHT+ or - will change the brightness in static mode



Preset brightness can be jumped to via the 25%, 50% or 100% buttons



Press POWER to enter standby mode (all LEDs off)

Pairing : If the LED controller does not respond to the RF remote handset, disconnect DC power from the controller.

Reconnect the DC power to the controller and hold down the “100%” and “25%” buttons simultaneously.

The controller and handset should now be paired and the controller should respond to the handset.

Preset

Name

Description

Random Glow

Fade in and out at random brightness & intervals

Regular Glow

Fade between fully on and off at a regular rate

Half Glow

Fade between fully on and half-on at a regular rate

Flicker

Flash on and off at a fast regular rate

Offset Flash

Flash on and off with pause at a regular rate

Even Flash

Flash on and off evenly at a regular rate

SOS

3 short - 3 long - 3 short Morse Code flash sequence

Strobe

Very short burst at regular intervals

Specifications

Power supply

5-24Vdc, 12A (50% duty cycle) or 6A (100% duty cycle)

Remote control frequency

433MHz

Lead length (power input, LED output)

100mm

Connections

DC5521 connectors

Controller dimensions

42 x 13 x 5mm

Weight

4.8g

Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or

Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.

The goods must be disposed of according to your local council guidelines.

Errors and omissions excepted.

Product specificaties

Merk:	LYYT
Categorie:	Controller
Model:	ISRF1

Heb je hulp nodig?

Als je hulp nodig hebt met LYYT ISRF1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Controller LYYT

LYYT LTC22IR Handleiding

13 Juni 2023

LYYT PS60 Handleiding

11 Juni 2023

LYYT A2-A1818C Handleiding

10 Juni 2023

LYYT ISRF1 Handleiding

9 Juni 2023

LYYT AL1-W2915 Handleiding

4 Juni 2023

LYYT IMDC1 Handleiding

4 Juni 2023

LYYT AL2-C1709 Handleiding

29 Mei 2023

LYYT LTC44IR Handleiding

29 Mei 2023

LYYT AL1-C2311 Handleiding

21 Mei 2023

LYYT PS45-24 Handleiding

14 Mei 2023

Handleiding Controller

Nieuwste handleidingen voor Controller

IVT SCDplus Handleiding

11 December 2024

IVT MPPTplus+ 20A Handleiding

10 December 2024

GVM YK22 Handleiding

10 December 2024

Alfatron ALF-IPCON-HDMI Handleiding

10 December 2024

Harvia Xenio C260 Handleiding

8 December 2024

Hotone Patch Kommander Handleiding

7 December 2024

Hotone Ampero Control Handleiding

7 December 2024

IFM AC1317 Handleiding

5 December 2024

Speed-Link Thunderstrike Handleiding

2 December 2024

COLBOR CTRL1 Handleiding

29 November 2024