Luxman M-700u Handleiding

Luxman Receiver M-700u

Lees hieronder de 📖 handleiding in het Nederlandse voor Luxman M-700u (20 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
Owne sr`
Manual
STEREO POWER AMPLIFIER
M-700u
Contents
Precautions 1 ·············································································································
Features of This Unit 2 ································································································
Names and Functions 4 ······························································································
Connections 8 ············································································································
Block Diagram 12 ·······································································································
Specifications 13 ········································································································
Before Asking for Repair Services 14 ··········································································
STEREO POWER AMPLIFIER M-700u
1
Precautions
Installation place
Install this unit in a location where good ventilation and heat
radiation is assured.
Especially, placing this unit where direct sunlight is present,
where the temperature rises excessively high such as close to
a heater, or where it is humid or dusty may cause a malfunc-
tion even if heat is efficiently released.
Ventilation holes
Do not block the ventilation holes of the top and bottom pan-
els. If the amplifier is installed on a rack or the like, secure
ample space for cooling and leave the door open. Do not pile
up other things on the amplifier and never put articles on it.
Failure to observe this may cause a malfunction.
Note:
For heat dispersal, do not install this equipment in a confined
space such as a book case or similar unit.
Precautions in connecting with other
components
When connecting this product with a control amplifier and
such, be sure to turn off the power of this product and all oth-
er connected devices. Failure to observe this may generate
a strong noise resulting in speaker damage or a malfunction.
The pin-plug to be inserted in each input terminal of this unit
shall be pushed in firmly. If the grounding terminal is inade-
quately connected, noises including hum may be generated,
resulting in an adverse S/N ratio.
Cautions in connecting speakers
When making speaker system connections, exercise extra
care not to short-circuit between and of the speaker ⊕ ⊖
terminals and speaker input terminals of this unit.
If a large signal is applied to the amplifier with its circuit left
short-circuited, a large current may be passed through the
output circuit and cause a malfunction.
The sound is not generated shortly after
the power supply is turned on.
This amplifier is equipped with a time muting circuit in order to
separate the output circuit. Therefore, no sound is generated
shortly after the power supply is turned on.
If the volume control is moved to a high sound level before
the time muting circuit is canceled, a large sound is suddenly
generated. Please be advised that the volume control of the
input device such as a control amplifier shall be set to a low
level at first and adjusted according to your taste after sound
comes out of the speakers.
Protection circuit
This product is equipped with a protection circuit that is ac-
tivated upon detection of overcurrent, abnormally high tem-
perature, and DC drift to protect the amplifier and speakers.
When the protection circuit is activated, the output to the
speaker terminal is shut off and the standby indicator lights
up to show that this product is in the standby state. Please
consult your dealer when the protection circuit is sometimes
activated even after turning off the switch, disconnecting the
power plug from the wall outlet, and connecting it again after
a while.
Repair and adjustment
When repair and adjustments are needed, please ask the
dealer where you bought the unit.
Cleaning
For cleaning, use a piece of soft cloth to wipe the unit such as
cleaning cloth. When the dirt is hard to remove, use a small
amount of neutral detergent to wipe, and then wipe the unit
with dry cloth. Do not use a solvent like benzine or thinner
because such a substance can often damage the exterior.
* Note
Wall
* *
*
Exercise extra care when this unit is unpacked, assembled,
transported, and installed because this unit is heavy.
SAFETY CAUTIONS
CAUTION


Product specificaties

Merk: Luxman
Categorie: Receiver
Model: M-700u

Heb je hulp nodig?

Als je hulp nodig hebt met Luxman M-700u stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Luxman

Luxman

Luxman M-800A Handleiding

13 November 2024
Luxman

Luxman L-595ASE Handleiding

13 November 2024
Luxman

Luxman C-700u Handleiding

13 November 2024
Luxman

Luxman M-700u Handleiding

13 November 2024
Luxman

Luxman L-550AX Handleiding

13 November 2024
Luxman

Luxman L-507u Handleiding

13 November 2024
Luxman

Luxman M-900u Handleiding

13 November 2024
Luxman

Luxman C-900u Handleiding

13 November 2024
Luxman

Luxman EQ-500 Handleiding

13 November 2024

Handleiding Receiver

Nieuwste handleidingen voor Receiver

Yamaha

Yamaha XMV8140 Handleiding

14 November 2024
Yamaha

Yamaha TX4n Handleiding

14 November 2024
Yamaha

Yamaha XMV4140 Handleiding

14 November 2024
Yamaha

Yamaha PC6501N Handleiding

14 November 2024
Yamaha

Yamaha PC3301N Handleiding

14 November 2024
Yamaha

Yamaha PC4801N Handleiding

14 November 2024
Yamaha

Yamaha P1000S Handleiding

14 November 2024
Yamaha

Yamaha PC9501N Handleiding

14 November 2024
Yamaha

Yamaha PC2001N Handleiding

14 November 2024