Lümme Easy Mix Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Lümme Easy Mix (7 pagina's) in de categorie Blender. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/7
HAND BLENDER
Instruction manual
РУЧНОЙ БЛЕНДЕР
Руководство по эксплуатации
LU-1823
DESCRIPTION
1. On / Off switch with 2 speeds
2. Motor unit
3. Removable blender shaft
4. Stainless steel blade
IMPORTANT SAFETY INSTRUCTIONS
• Before the first connecting the appliance check that voltage indicated on the rating label corresponds to the mains voltage in your home.
• For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than described in this instruction manual.
• Do not disassemble the appliance when it is plugged in power supply. Always unplug the appliance from the power supply before cleaning and when it is not in use.
2
• To prevent risk of electric shock and fire, do not immerse the motor unit in water or in any other liquid. If it has happened, unplug it immediately and check in service
center.
• Close supervision is necessary when it is used near children.
• Do not leave the appliance switched on when not in use.
• Do not use other attachments than those supplied.
• Do not operate after malfunction or cord damage.
• Do not attempt to repair, adjust or replace parts in the appliance. Check and repair the malfunctioning appliance in the nearest service center only.
• Keep the cord away from sharp edges and hot surfaces.
• Do not place the appliance near gas or electric oven or on heated surface.
• Avoid any contacts with moving parts.
• The blade is very sharp, so handle it with care.
• Never blend hot liquids.
• Do not operate the appliance continuously longer than 2 minutes.
• Switch off and unplug the appliance after each use.
BEFORE THE FIRST USE
• Remove all packing materials from the appliance.
• Wipe the motor unit with damp cloth and wash the blender stick in warm soapy water, rinse and dry.
• Attach the blender stick to the motor unit.
INSTRUCTION FOR USE
• You can blend baby food, soups, sauces, mousses, milk shakes and mayonnaise.
• Cut food staff into small pieces.
• Place all ingredients in some bowl.
• Plug in the blender.
• Place the blender into the bowl and switch the blender to the required speed by pressing at the top or bottom of the On/ Off button.
• Don’t let liquid get above the joint between the motor unit and the blender stick.
• After use, unplug the blender and dismantle.
CAUTION: Do not operate the appliance continuously longer than 2 minutes.
3
Product specificaties
| Merk: | Lümme |
| Categorie: | Blender |
| Model: | Easy Mix |
Heb je hulp nodig?
Als je hulp nodig hebt met Lümme Easy Mix stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Blender Lümme
2 Juni 2023
9 Mei 2023
7 Mei 2023
4 Mei 2023
24 Oktober 2022
Handleiding Blender
- Blender Electrolux
- Blender Braun
- Blender Bosch
- Blender Philips
- Blender Panasonic
- Blender AEG
- Blender BEKO
- Blender Grundig
- Blender Inventum
- Blender Kenwood
- Blender Krups
- Blender Medion
- Blender Quigg
- Blender Siemens
- Blender Tefal
- Blender Unold
- Blender Adler
- Blender Afk
- Blender Akai
- Blender Alessi
- Blender Ambiano
- Blender Amica
- Blender Ariete
- Blender Bamix
- Blender Bartscher
- Blender Beem
- Blender Bellini
- Blender Beper
- Blender Bestron
- Blender Bifinett
- Blender Blaupunkt
- Blender Blendtec
- Blender Blokker
- Blender Bodum
- Blender Bomann
- Blender Boretti
- Blender Bourgini
- Blender Brabantia
- Blender Brandt
- Blender Breville
- Blender Buffalo
- Blender Bugatti
- Blender Domo
- Blender Domoclip
- Blender Dualit
- Blender Duronic
- Blender Efbe-schott
- Blender Emerio
- Blender Esge
- Blender Esperanza
- Blender Espressions
- Blender ETA
- Blender Eufy
- Blender Exquisit
- Blender Fagor
- Blender Farberware
- Blender Fritel
- Blender G3 Ferrari
- Blender Galanz
- Blender Gastroback
- Blender GE
- Blender George Foreman
- Blender Gorenje
- Blender Gourmetmaxx
- Blender Graef
- Blender H.Koenig
- Blender Haier
- Blender Hanseatic
- Blender Hendi
- Blender Hitachi
- Blender Homeland
- Blender Hotpoint
- Blender Hyundai
- Blender Innoliving
- Blender InstantPot
- Blender Kalorik
- Blender Kambrook
- Blender Kitchen Crew
- Blender KitchenAid
- Blender Klarstein
- Blender Koenic
- Blender Koenig
- Blender Kogan
- Blender Konig
- Blender Korona
- Blender Lagrange
- Blender Laica
- Blender Livington
- Blender Livoo
- Blender Logik
- Blender Maestro
- Blender Magic Bullet
- Blender Magimix
- Blender Maxwell
- Blender Melissa
- Blender Mesko
- Blender Mia
- Blender Micromaxx
- Blender Midea
- Blender Moa
- Blender Montana
- Blender Morphy Richards
- Blender Moulinex
- Blender MPM
- Blender Nedis
- Blender Ninja
- Blender Nordmende
- Blender Nova
- Blender Novamatic
- Blender Novis
- Blender NutriBullet
- Blender Philco
- Blender Primo
- Blender Princess
- Blender Privileg
- Blender ProfiCook
- Blender Proline
- Blender Redmond
- Blender Renkforce
- Blender Ritter
- Blender Rommelsbacher
- Blender Rotel
- Blender Russell Hobbs
- Blender Sage
- Blender Salton
- Blender Santos
- Blender Sanyo
- Blender Saro
- Blender Saturn
- Blender Schneider
- Blender Sencor
- Blender Severin
- Blender Shark
- Blender Sharp
- Blender Silvercrest
- Blender Smeg
- Blender Sogo
- Blender Solac
- Blender Solis
- Blender Springlane
- Blender Steba
- Blender Studio
- Blender Sunbeam
- Blender SupportPlus
- Blender Swan
- Blender Taurus
- Blender Team
- Blender Telefunken
- Blender Tesco
- Blender Tevion
- Blender Thane
- Blender Thomas
- Blender Tomado
- Blender Tower
- Blender Trebs
- Blender Tristar
- Blender Turbotronic
- Blender Turmix
- Blender Ufesa
- Blender Vitamix
- Blender Vitek
- Blender Vivax
- Blender Waves
- Blender Weasy
- Blender Westinghouse
- Blender Wmf
- Blender Wolf
- Blender Xsquo
- Blender Zelmer
- Blender Jata
- Blender JML
- Blender Jocel
- Blender JTC
- Blender Juiceman
- Blender OK
- Blender Omega
- Blender OneConcept
- Blender Orion
- Blender Oster
- Blender Clas Ohlson
- Blender Arzum
- Blender Black And Decker
- Blender Camry
- Blender Caso
- Blender Clatronic
- Blender Concept
- Blender Continental Edison
- Blender Cuisinart
- Blender ECG
- Blender Elba
- Blender Gallet
- Blender Hamilton Beach
- Blender Heinner
- Blender Imetec
- Blender Izzy
- Blender Khind
- Blender Mellerware
- Blender OBH Nordica
- Blender Optimum
- Blender Orbegozo
- Blender Profilo
- Blender Scarlett
- Blender Sinbo
- Blender Trisa
- Blender Vox
- Blender Wilfa
- Blender Champion
- Blender Monoprice
- Blender Catler
- Blender Drew & Cole
- Blender Nutrichef
- Blender AYA
- Blender Bella
- Blender Costway
- Blender Danby
- Blender King
- Blender Nevir
- Blender Svan
- Blender Ardes
- Blender Eldom
- Blender Grunkel
- Blender Coline
- Blender Haeger
- Blender Waring Commercial
- Blender Brentwood
- Blender Chefman
- Blender DCG
- Blender Witt
- Blender Royal Catering
- Blender Apuro
- Blender Day
- Blender Zephir
- Blender Lenoxx
- Blender Riviera And Bar
- Blender Cosori
- Blender Baby Brezza
- Blender G21
- Blender Aurora
- Blender BORK
- Blender Orava
- Blender Signature
- Blender Dash
- Blender Cecotec
- Blender Prixton
- Blender Flama
- Blender Nesco
- Blender RGV
- Blender Comelec
- Blender Dynamic
- Blender Bar Maid
- Blender Ursus Trotter
- Blender Noveen
- Blender CRUX
- Blender AENO
- Blender Nutri Ninja
- Blender Łucznik
- Blender Emeril Lagasse
- Blender PowerXL
- Blender Globe
- Blender Beautiful
- Blender Tribest
- Blender Usha
- Blender Vitinni
- Blender Zwilling
- Blender Sam Cook
- Blender Zeegma
- Blender WestBend
- Blender Just Perfecto
- Blender Focus Electrics
- Blender Petra Electric
- Blender AvaMix
- Blender Robot Coupe
- Blender Inno-Hit
- Blender Jarden
- Blender JIMMY
- Blender Semak
- Blender Create
- Blender Girmi
- Blender BioChef
- Blender Power Air Fryer XL
- Blender Luvele
- Blender Back To Basics
- Blender Proappliances
- Blender Electroline
- Blender Imarflex
- Blender Mystery
Nieuwste handleidingen voor Blender
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024
16 November 2024