Linksys LAPAC1750Pro Handleiding

Linksys Niet gecategoriseerd LAPAC1750Pro

Lees hieronder de 📖 handleiding in het Nederlandse voor Linksys LAPAC1750Pro (121 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/121

LAPAC1750PRO

User Guide

Table of ContentsLAPAC1750PRO Access Point Software User Manual

Section 1: Getting Started 1. . . . . . . . . . . . . . . . . . . . . .

Administrator’s Computer Requirements . . . . . . . . . . . . . . .1

Wireless Client Requirements. . . . . . . . . . . . . . . . . . . . . . .2

Online Help, Supported Browsers, and Limitations . . . . . . . . .2

Dynamic and Static IP Addressing on the AP . . . . . . . . . . . . .3

Installing the Access Point . . . . . . . . . . . . . . . . . . . . . . . . .3

Conﬁguring the Ethernet Settings. . . . . . . . . . . . . . . . . . . .5

Conﬁguring IEEE 802.1X Authentication . . . . . . . . . . . . . . . .6

Conﬁguring Security on the Wireless Access Point . . . . . . . . .6

Section 2: Viewing Access Point System Status . . . . . . . . 7

System Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Network Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Radio Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Workgroup Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Associated Client. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

TSPEC Client Associations . . . . . . . . . . . . . . . . . . . . . . . . 15

TSPEC Status and Statistics . . . . . . . . . . . . . . . . . . . . . . . 16

TSPEC AP Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Email Alert Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

System Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Section 3: Conﬁguring the Access Point . . . . . . . . . . . . .19

Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Wireless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

QoS and Access Control . . . . . . . . . . . . . . . . . . . . . . . . . 66

SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Captive Portal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Cluster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Section 4: Maintenance of the Access Point . . . . . . . . . 110

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

Table of Contents

Section 1: Getting StartedLAPAC1750PRO Access Point Software User Manual

Section 1: Getting Started

The LAPAC1750PRO Access Point provides continuous, high-speed access

between wireless devices and Ethernet devices. It is an advanced, standards-

based solution for wireless networking in businesses of any size. The access point

(AP) enables wireless local area network (WLAN) deployment while providing

state-of-the-art wireless networking features.

The access point works in Standalone Mode, which means it is an individual

access point in your network. You manage the device through a Web-based user

interface (UI) or SNMP (Simple Network Management Protocol.

This document describes how to perform the setup, management, and

maintenance of the access point in Standalone Mode.

Before you power on a new access point, review the following sections to

check required hardware and software components, client configurations, and

compatibility issues. Make sure you have everything you need for a successful

launch and test of your new or extended wireless network.

This section contains the following topics:

• Administrator’s Computer Requirements

• Wireless Client Requirements

• Online Help, Supported Browsers, and Limitations

• Dynamic and Static IP Addressing

• Installing the Access Point

• Configuring the Ethernet Settings

• Configuring IEEE 802.1X Authentication

• Configuring Security on the Access Point

To manage the access point by using the Web interface, the AP needs an IP

address. If you use VLANs or IEEE 802.1X Authentication (port security) on your

network, you might need to configure additional settings on the AP before it can

connect to the network.

NOTE:

The access point is not designed to function as a gateway to the Internet.

To connect your WLAN to other LANs or the Internet, you need a gateway

device.

Administrator’s Computer Requirements

The following table describes the minimum requirements for the administrator’s

computer for configuration and administration of the access point through a

Web-based user interface (UI).

Table 1: Requirements for the Administrator’s Computer

Required Software or

Component

Description

Ethernet Connection to

the Access Point

The computer used to configure the first access

point must be connected to the access point by

an Ethernet cable.

Wireless Connection to

the Network

After initial configuration and launch of the first

access point on your new wireless network, you

can make subsequent configuration changes

through the Administration Web pages using a

wireless connection to the internal network. For

wireless connection to the access point, your

administration device will need Wi-Fi capability

similar to that of any wireless client: a portable

or built-in Wi-Fi client adapter that supports one

or more of the IEEE 802.11 modes in which you

plan to run the access point.

Product specificaties

Merk:	Linksys
Categorie:	Niet gecategoriseerd
Model:	LAPAC1750Pro
Kleur van het product:	Wit
Gewicht:	520 g
Breedte:	247 mm
Diepte:	238 mm
Hoogte:	43.3 mm
LED-indicatoren:	Ja
Stroom:	2 A
Frequentieband:	2.4, 5 GHz
Inclusief AC-adapter:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	2
Bevestigingsmogelijkheid voor kabelslot:	Ja
Kabelslot sleuf type:	Kensington
Certificering:	FCC, CE, IC
Aansluiting voor netstroomadapter:	Ja
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Netwerkstandaard:	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3u
Ondersteunde beveiligingsalgoritmen:	802.1x RADIUS, WEP, WPA, WPA2
Soort antenne:	Intern
Antenne versterkingsniveau (max):	5.2 dBi
Aantal gebruikers:	- gebruiker(s)
Temperatuur bij opslag:	-20 - 70 °C
Intern:	Nee
Web-gebaseerd management:	Ja
Luchtvochtigheid bij opslag:	10 - 90 procent
Reset button:	Ja
Maximale overdrachtssnelheid van gegevens:	1750 Mbit/s
2,4 GHz:	Ja
5 GHz:	Ja
VLAN=ondersteuning:	Ja
Power over Ethernet (PoE):	Ja
Aantal kanalen:	- kanalen
Beheerprotocollen:	HTTP/HTTPS, SNMP
AC-ingangsspanning:	12 V
Stroomverbruik (typisch):	24 W
Bedrijfstemperatuur (T-T):	0 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 85 procent