Lindy BTA-30 Handleiding

Lindy Bluetooth ontvanger BTA-30

Lees hieronder de 📖 handleiding in het Nederlandse voor Lindy BTA-30 (18 pagina's) in de categorie Bluetooth ontvanger. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/18

BTA-30

Bluetooth Audio Receiver with NFC

User Manual English

Benutzerhandbuch Deutsch

Manuel Utilisateur Français

Manuale Italiano

No. 20407

www.lindy.com

Tested to Comply with

FCC Standards

For Home and Oﬃce Use

User Manual English

Introduction

Thank you for purchasing the LINDY BTA-30 Bluetooth Audio Receiver with NFC. The BTA-30 adds Bluetooth

audio connection capabilities to HiFi, Headphones or speaker systems with 3.5mm inputs or Phono*. Compatible

with modern Bluetooth devices, and with the added benefit of NFC for easy pairing, the BTA-30 seamlessly

delivers audio from your smartphone, tablet or other Bluetooth enabled devices for playback directly on your audio

system.

Simple to set-up and with a maximum range of 10m, the BTA-30 is ideal for home & mobile use, helping you make

the most of your mobile audio experience.

*requires 35.mm to Phono cable, not included.

Package Contents



BTA-30 Bluetooth Audio Receiver with NFC



USB Micro-B cable



3.5mm stereo audio cable



LINDY Manual

Features



NFC Easy Pairing



3.5mm analogue audio output



Built in Microphone for Speakerphone functionality



USB Micro-B female - power & charging



Internal rechargeable 230mAh lithium-ion polymer battery

o 2 hours charging time

o Up to 12 hours playback



10m eﬀective range



A2DP Bluetooth proﬁle support

Speciﬁcation



Bluetooth 3.0 +EDR with A2DP



Bluetooth Frequency: 2.402-2.480GHz



Supported Codecs: SBC



Audio output: 1 x 3.5mm female



Signal To Noise Ratio: 94dB ≥



Compression ratio: 44.1 / 48KHz



Frequency Response: 100Hz ~ 22kHz



Algorithmic Delay: 40ms



THD+N: 0.03% @ 20mW/f = 1kHz



Chipset: BM81SPK02



Weight: 40 grams



Operation temperature: -10°C ~ +55°C, Storage tempe rature: -20°C ~ +60°C

Note – If you want to use the BTA-30 with a Phono input on your HiFi / Speaker System, please use a 3.5mm to

Phone cable, such as LINDY No. 35490 – 7.

User Manual English

Installation

Operating via USB power (Recommended)

Connect the supplied USB Type A to Micro-B cable

to the Power & Charging port of the BTA-30 and

connect this to a free USB port on your HiFi, TV or

LINDY USB power adapter.

Operating via the internal battery

Ensure the BTA-30’s internal battery is fully charged.

2 hours charging provides a full battery &

approximately 12 hours of operation

Connect the BTA-30 to your HiFi, Headphones or speaker system with the included 3.5mm cable.

Operation

Power on the BTA-30

1. Press & hold the Power Button to turn on the BTA-30. The Bluetooth Status light with flash Blue and you

can begin the Bluetooth Pairing process.

2. Press & hold the Power Button again to turn the Receiver oﬀ.

Pairing with NFC devices

1. Start the NFC function on your device.

2. Tap your source device on the top of the LINDY BTA-30.

3. Your device may prompt you to proceed with pairing, if so select yes.

4. A connected to “LINDY BTA-30” message will appear on your source device. You can now play audio via

the BTA-30.

Pairing with Bluetooth devices

1. Activate your source device’s Bluetooth and search for available devices

2. Select the “LINDY BTA-30” and follow the onscreen prompts. If a PIN is required enter “0000” or “1234”

3. Your source device will connect to the BTA-30 and you can start playing audio from your device.

Bluetooth Status

(Blue) Low Power / External

Power / Charge Indicator

(Red)

Speakerphone Mic

Power Button

Speakerphone

Pairing Button

3.5mm Audio Out

USB Micro-B

Power & Charging

NFC tag area

Product specificaties

Merk:	Lindy
Categorie:	Bluetooth ontvanger
Model:	BTA-30
Kleur van het product:	Zwart
Gewicht:	40 g
Stroombron:	USB/batterij
Oplaadtijd:	2 uur
Capaciteit van de accu/batterij:	230 mAh
Bluetooth-versie:	3.0+HS
Bluetooth-profielen:	A2DP
Meegeleverde kabels:	Audio (3.5mm), Micro-USB
Snelstartgids:	Ja
Operationele tijd:	10 uur
Frequentiebereik:	2.4 - 2.4835 GHz
Hostinterface:	3,5 mm
Signaal/ruis-verhouding:	94 dB
Transmissie-afstand:	10 m
Batterijtechnologie:	Lithium-Ion (Li-Ion)
Compatibiliteit met Apple-apparaten:	Niet ondersteund