Liftmaster SL595UL Handleiding

Liftmaster Niet gecategoriseerd SL595UL

Lees hieronder de 📖 handleiding in het Nederlandse voor Liftmaster SL595UL (48 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/48
ELITE SERIES HEAVY DUTY INDUSTRIAL
AC SLIDE GATE OPERATOR
Model SL595UL
INSTALLATION MANUAL
LiftMaster
300 Windsor Drive
Oak Brook, IL 60523
• THIS PRODUCT IS TO BE INSTALLED AND
SERVICED BY A TRAINED GATE SYSTEMS
TECHNICIAN ONLY.
• This model is for use on vehicular passage
gates ONLY and not intended for use on
pedestrian passage gates.
• This model is intended for use in Class I, II, III
and IV vehicular slide gate applications.
• Visit LiftMaster.com to locate a professional
installing dealer in your area.
• This gate operator is compatible with MyQ®
and Security+ 2.0® accessories.
SL595101UL
1 HP, 120/208-240 Vac Single Phase
SL595103UL
1 HP, 208-240/480 Vac Three Phase
SL595105UL
1 HP, 575 Vac Three Phase
SL595151UL
1-1/2 HP, 120/208-240 Vac Single Phase
SL595203UL
2 HP, 208-240/480 Vac Three Phase
SL595205UL
2 HP, 575 Vac Three Phase
Access installation and technical support guides or
register this product
Send it in by texting the
photo to 71403.
Take a photo of the
camera icon including
the points ( ).
1.
2.
SL595ULTECH
2
SAFETY 2
Safety Symbol and Signal Word Review ...............................................2
Usage Class ...........................................................................................3
UL325 Entrapment Protection Requirements ........................................3
Safety Installation Information ...............................................................4
Gate Construction Information ...............................................................5
INTRODUCTION 6
Carton Inventory ....................................................................................6
Operator Specifications ..........................................................................7
Site Preparation .....................................................................................9
INSTALLATION 10
Step 1 Install the Operator ...................................................................10
Step 2 Attach the Chain .......................................................................12
Step 3 Install Entrapment Protection ...................................................13
Step 4 Earth Ground Rod .....................................................................15
Step 5 Power Wiring ............................................................................15
Step 6 Dual gate setup .........................................................................18
ADJUSTMENT 20
Adjust the Handing and Limits .............................................................20
Adjust the Clutch .................................................................................21
Fine Tune the Force .............................................................................22
Obstruction Test ..................................................................................22
OPERATOR OVERVIEW 23
CONTROL BOARD OVERVIEW 24
Learn Button ........................................................................................25
Diagnostic Display ...............................................................................25
Handing Buttons ..................................................................................25
Bipart Delay .........................................................................................25
Timer-to-Close (TTC) ..........................................................................25
Reversal Force Dial ..............................................................................26
Test Buttons .........................................................................................26
Status LEDs .........................................................................................26
WIRE ACCESSORIES TO CONTROL BOARD 27
Three Button Control Station ...............................................................27
Fire Department ...................................................................................27
Loops ...................................................................................................27
Photoelectric Sensors and Edge Sensors ............................................28
Locks ...................................................................................................28
EXPANSION BOARD OVERVIEW 29
Exit Fail Switch .....................................................................................29
AC FAIL Switch ....................................................................................29
ANTI TAIL Switch .................................................................................29
QUICK CLOSE Switch ..........................................................................29
Auxiliary Relay 1 and 2 ........................................................................30
WIRE ACCESSORIES TO EXPANSION BOARD 31
Photoelectric Sensors and Edge Sensors ............................................31
Control Station .....................................................................................31
Loops ...................................................................................................32
ADDITIONAL WIRING 32
SAMS Wiring With Relays Not Energized ............................................32
Field Wiring ..........................................................................................33
PROGRAMMING 34
Remote Controls (Not Provided) .........................................................34
LiftMaster Internet Gateway (Not Provided) ........................................35
Erase All Codes ....................................................................................35
To Remove and Erase Monitored Entrapment
Protection Devices ...............................................................................35
Constant Pressure Override (CPO) ......................................................35
SETTINGS 36
Gate Operator Setup Examples ............................................................36
Dual Gate Settings ...............................................................................37
MAINTENANCE 38
Important Safety Instructions ..............................................................38
Maintenance Chart ...............................................................................38
TROUBLESHOOTING 39
Diagnostic Codes .................................................................................39
Diagnostic Codes Table .......................................................................40
Operator Alarm ....................................................................................42
Troubleshooting Chart .........................................................................43
ACCESSORIES 45
REPAIR PARTS 46
WARRANTY 47
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth defects or other
reproductive harm. For more information go to www.P65Warnings.ca.gov.
When you see these Safety Symbols and Signal Words on the following pages, they will alert
you to the possibility of if you do not comply with the warnings that Serious Injury or Death
accompany them. The hazard may come from something mechanical or from electric shock.
Read the warnings carefully.
When you see this Signal Word on the following pages, it will alert you to the possibility of
damage to your gate and/or the gate operator if you do not comply with the cautionary
statements that accompany it. Read them carefully.
IMPORTANT NOTE:
• BEFORE attempting to install, operate or maintain the operator, you must read and fully
understand this manual and follow all safety instructions.
• DO NOT attempt repair or service of your gate operator unless you are an Authorized
Service Technician.
MECHANICAL
ELECTRICAL
TABLE OF CONTENTS
SAFETY
Safety Symbol and Signal Word Review
3
Usage Class
Class I - Residential Vehicular Gate Operator
A vehicular gate operator (or system) intended for use in garages or
parking areas associated with a residence of one-to four single families.
Class II - Commercial/General Access Vehicular
Gate
A vehicular gate operator (or system) intended for use in a commercial
location or building such as a multi-family housing unit (five or more
single family units), hotel, garages, retail store, or other buildings
accessible by or servicing the general public.
Class III - Industrial/Limited Access Vehicular
Gate
A vehicular gate operator (or system) intended for use in an industrial
location or building such as a factory or loading dock area or other
locations not accessible by or intended to service the general public.
Class IV - Restricted Access Vehicular Gate
Operator
A vehicular gate operator (or system) intended for use in a guarded
industrial location or building such as an airport security area or other
restricted access locations not servicing the general public, in which
unauthorized access is prevented via supervision by security personnel.
UL325 Entrapment Protection Requirements
lAminimum of two independent* monitored entrapment protection
devices are required to be installed at each entrapment zone
lEvery installation is unique. It is the responsibility of the installer to
install external monitored entrapment protection devices in each
entrapment zone
lThis vehicular slide gate operator will operate only after installation
of a minimum of two independent* monitored entrapment protection
devices in each direction; two in the open direction and two in the
close direction.
lEntrapment protection device types include inherent (built into the
operator), monitored external photoelectric sensors or monitored
external edge sensors
lThis operator is provided with an inherent entrapment protection
device built into the operator that serves as one of the two
independent devices
* Independent - the same type of device shall NOT be used for both
entrapment protection devices.
IMPORTANT SAFETY
INSTRUCTIONS
To reduce the risk of INJURY or DEATH:
lREAD AND FOLLOW ALL INSTRUCTIONS.
lNEVER let children operate or play with gate controls. Keep the
remote control away from children.
lALWAYS keep people and objects away from the gate. NO ONE
SHOULD CROSS THE PATH OF THE MOVING GATE.
lTest the gate operator monthly. The gate MUST reverse on contact
with an object or reverse when an object activates the noncontact
sensors. After adjusting the force or the limit of travel, retest the
gate operator. Failure to adjust and retest the gate operator properly
can increase the risk of INJURY or DEATH.
lUse the emergency release ONLY when the gate is not moving.
lKEEP GATES PROPERLY MAINTAINED. Read the owner’s manual.
Have a qualified service person make repairs to gate hardware.
lThe entrance is for vehicles ONLY. Pedestrians MUST use separate
entrance.
l
l
l
ll SAVE THESE
INSTRUCTIONS.
SAFETY

Product specificaties

Merk: Liftmaster
Categorie: Niet gecategoriseerd
Model: SL595UL

Heb je hulp nodig?

Als je hulp nodig hebt met Liftmaster SL595UL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Liftmaster

Liftmaster

Liftmaster CAPXLV2MC Handleiding

5 Augustus 2024
Liftmaster

Liftmaster BG770 Handleiding

8 Juli 2024
Liftmaster

Liftmaster LMHNTG Handleiding

8 Juli 2024
Liftmaster

Liftmaster SL585 Handleiding

11 Juni 2024
Liftmaster

Liftmaster SL590 Handleiding

11 Juni 2024
Liftmaster

Liftmaster BG3000 Handleiding

11 Juni 2024
Liftmaster

Liftmaster CAPXSTKPL Handleiding

9 Juni 2024
Liftmaster

Liftmaster BG790 Handleiding

9 Juni 2024
Liftmaster

Liftmaster 64LM Handleiding

27 Mei 2024
Liftmaster

Liftmaster CAPXSHOOD Handleiding

8 December 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Protector

Protector AS-5030.3 V2 Handleiding

21 December 2024
Sabrent

Sabrent AU-MMCW Handleiding

21 December 2024
Sabrent

Sabrent AU-2X35 Handleiding

21 December 2024
Sabrent

Sabrent CB-RS232 Handleiding

21 December 2024
Owon

Owon 500W Handleiding

21 December 2024
Owon

Owon 300W Handleiding

21 December 2024
Sabrent

Sabrent SB-RKTQ4-1TB Handleiding

21 December 2024
Sabrent

Sabrent SB-RKTQ-1TB Handleiding

21 December 2024
Sabrent

Sabrent SB-ROCKET-1TB Handleiding

21 December 2024
Sabrent

Sabrent SB-HTSS Handleiding

21 December 2024