Liftmaster LC36M41 Handleiding

Liftmaster Niet gecategoriseerd LC36M41

Lees hieronder de 📖 handleiding in het Nederlandse voor Liftmaster LC36M41 (22 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/22

LiftMaster

300 Windsor Drive

Oak Brook, IL 60523-1510

Model LC36M, LC36M41

LiftMaster® Monitored Light Curtain

NOTE: (Images not to scale)

Monitored

Light Curtain

Receiver

Monitored

Light Curtain

Transmitter

Primary entrapment protection

ONLY

6" (15 cm) maximum above and a minimum

of 3" (7.62 cm) from the ﬂoor

6" (15 cm) maximum above

and a minimum of 3" (7.62 cm)

from the ﬂoor

To prevent possible SERIOUS INJURY or DEATH from a closing door:

• Be sure to DISCONNECT POWER to the operator BEFORE installing the

Monitored Light Curtain .

• The door MUST be in the fully opened or closed position BEFORE

installing the Monitored Light Curtain .

• Mount bottom optical sensor of Monitored Light Curtain no higher than

3" to 6" above the ground if used as primary entrapment protection.

• Correctly connect and align the Monitored Light Curtain transmitter

and receiver.

• The Monitored Light Curtain is for use with LiftMaster

® Commercial

Doors. Use with ANY other product voids the warranty.

• DO NOT use this product for the protection of dangerous machinery

or in explosive atmospheres or radioactive environments. Use ONLY

speciﬁc and approved types of devices for such applications.

• The Monitored Light Curtain MUST be installed ONLY by authorized

and fully trained personnel.

IMPORTANT INFORMATION ABOUT THE MONITORED LIGHT CURTAIN

LiftMaster® Monitored Light Curtain (Model LC36M, Model LC36M41) is an entrapment protection device used with sectional and rolling doors that

is designed with 8 optical sensors that form 22 total invisible light beams. These light beams create a cross-pattern or netting effect for maximum

protection against entrapment. When properly connected and aligned, the Monitored Light Curtain will detect an obstruction in the path of the light

beams. If an obstruction breaks any light beam while the door is closing, the operator will stop and reverse to the full open position. The invisible light

beam must be unobstructed. No part of the door (or door tracks, springs, hinges, rollers or other hardware) may interrupt the light beam while the door

is closing.

When the Monitored Light Curtain is installed as the primary entrapment protection device, the lowest optical sensor will need to be installed 6" (15 cm)

maximum above and a minimum of 3" (7.62 cm) from the ﬂoor. If the Monitored Light Curtain is the secondary monitored entrapment protection device

it must be installed 12" (30.5cm) above the primary monitored entrapment protection device. The Monitored Light Curtain Transmitter must be installed

facing the Light Curtain Receiver across the entrapment zone.

NOTE: In this application, in order for the lowest optical sensor to be no higher than 6" above the ﬂoor, the wiring of the Monitored Light Curtain must

be facing in the upward direction. If installed with the wires facing down, the lowest optical sensor will be much higher than 6" above the ground; it will

be approx. 9-10" above the ground.

INTRODUCTION

NOTE: (Images not to scale)

CARTON INVENTORY

SPECIFICATIONS

Optical

Operating range: 3 - 33 feet (.91 - 10 meters) ............................................

Coverage area: 36" (91.4 cm) detection zone .............................................

Number of optical sensors: 8 ......................................................................

Number of invisible light beams: 22 ............................................................

Receiver LED: Green ...................................................................................

Transmitter LED: Amber .............................................................................

Electrical

Current Draw 40 mA ...................................................................................

Supply voltage: 18 to 30 volts AC or DC .....................................................

Output Type: Open Collector, Pulsed ..........................................................

Mechanical

Housing material: Aluminum, anodized ......................................................

Cable length LC36M: 6'6" (2m) ...................................................................

Cable length LC36M41: 41' (12.5m) ...........................................................

Enclosure rating: IP 67 ...............................................................................

Operating temperature range: - 40°F to +140°F (- 40°C to +60°C) .............

Storage temperature range: - 40°F to +185°F (- 40°C to +85°C) ...............

Dimensions

Light Curtain Receiver

Mounting Brackets (4)

Blocking Material

Light Curtain Transmitter

Red cable end

Green LED

Black cable end

Amber LED

Optical Sensors (8)

2' 9.5"

(86.1 cm)

.2" (5 mm)

.27" (7 mm)

LED

3' 8.25"

(112 cm)

1' 6.23"

(46.3 cm)

.47" (12 mm)

44" (111.8 cm) length with 36" (91.4 cm) detection zone

10" (25.4 cm) Extended Mounting Brackets with Reinforced Ribs for doors with a 2" (5.08 cm) edge

10" (25.4 cm)

2" (5.08 cm)1" (2.54 cm)

APPLICATION

The Monitored Light Curtain is UL Approved and compatible with

LiftMaster LOGIC 5.0 Heavy and Standard-Duty, Medium-Duty,

DDO8900W, LJ8900W, LJ8950W, ATSW, VFOH, HPH1, HPH2, HCTDCUL,

Fire Door Operators (FDC, FDCL, FDO-A, FDO-B), and Egress (LGE)

Commercial Door Operators. The Monitored Light Curtain is for indoor

use only but may be installed in areas exposed to rain or moisture.

INTRODUCTION

The images in this document are for reference only and your product may look different.

ACCESSORIES

Conduit Kit ...............................................................................OES-COND

Conduit kit with 2 junction boxes and 2 ﬂexible cables.

Plug-In Power Supply ...............................................................100MAPS

For Medium Duty Logic, DDO8900W, LJ8900W, LJ8950W, ATSW

LiftMaster commercial door operators that have little or no accessory power

available. Also for use with LOGIC 5.0 operators to provide additional power

for the Light Curtains when multiple Accessories are used. 100MAPS is

always required when 2 sets of light curtains are employed. Up to 2 sets of

Light Curtains may be powered by a single 100MAPS.

Plug-In Optional Card .............................................................CPS3CARD

Required to wire 2nd Monitored Entrapment Protection Device to LOGIC

5.0 Operators.

Not Shown

• Screws, Washers, and Nuts with Nylon Insert

• Wire Connectors (6)

• Installation Manual

• Model LC36M - Wire length 6'6"

• Model LC36M41 - Wire length 41'

Product specificaties

Merk:	Liftmaster
Categorie:	Niet gecategoriseerd
Model:	LC36M41

Heb je hulp nodig?

Als je hulp nodig hebt met Liftmaster LC36M41 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Liftmaster

Liftmaster CAPXLV2MC Handleiding

5 Augustus 2024

Liftmaster BG770 Handleiding

8 Juli 2024

Liftmaster LMHNTG Handleiding

8 Juli 2024

Liftmaster SL585 Handleiding

11 Juni 2024

Liftmaster SL590 Handleiding

11 Juni 2024

Liftmaster BG3000 Handleiding

11 Juni 2024

Liftmaster CAPXSTKPL Handleiding

9 Juni 2024

Liftmaster BG790 Handleiding

9 Juni 2024

Liftmaster 64LM Handleiding

27 Mei 2024

Liftmaster CAPXSHOOD Handleiding

8 December 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo VPPI Handleiding

21 November 2024

Festo VAVE-P17-TP-5YL1-P Handleiding

21 November 2024

Festo SD-SUB-D-BU9 Handleiding

21 November 2024

Festo SAMH-F12-MK Handleiding

21 November 2024

Festo SFAB Handleiding

21 November 2024

Festo SFAH Handleiding

21 November 2024

Festo DRRD-12 Handleiding

21 November 2024

Festo SDE3 Handleiding

21 November 2024

Festo SFTE Handleiding

21 November 2024

Festo CRVZS-5 Handleiding

21 November 2024