Liftmaster CAP2D Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Liftmaster CAP2D (57 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/57
myQ® BusinessTM
Connected Access Portal 2-Door Controller
INSTALLATION MANUAL
Model CAP2D
2
PRE-INSTALL NETWORKWIRING ACCESS CONTROLINTRODUCTION INSTALL
INTRODUCTION
Safety ............................................................................ 3
Controller Overview ....................................................... 4
Control Board Overview ................................................ 4
Carton Inventory ........................................................... 5
Tools Needed ................................................................ 5
Dimensions ................................................................... 5
Specifi cations ................................................................ 6
Electrical Ratings........................................................... 6
Wire Specifi cations ....................................................... 7
PRE-INSTALL
Internet Service ............................................................. 8
CP# for Controller ......................................................... 8
Setup a myQ® Business™ Account ............................... 8
Mount the Bracket ......................................................... 9
WIRING
Connect Power ............................................................ 10
NETWORK
Connect Internet .......................................................... 11
ACCESS CONTROL
Admin Mode ................................................................ 12
Wiring REX and Doors ................................................ 12
Operation .................................................................... 14
Gate Access................................................................. 15
Door Access ................................................................ 16
Confi guration Sheet .................................................... 18
Legal Disclaimers ...................................................... 19
Warranty ..................................................................... 19
1
2
3
4
INSTALL
5
Install the CAP2D ........................................................ 17
Troubleshooting .......................................................... 18
For myQ® Business™ programming, please visit www.myqbusiness.com
3
To reduce the risk of SEVERE INJURY or DEATH:
Disconnect power at the fuse box BEFORE proceeding.
To AVOID damaging gas, power or other underground utility
lines, contact underground utility locating companies BEFORE
digging.
ALL electrical connections MUST be made by a qualified
individual.
ALL power and control wiring MUST be run in separate
conduit.
To protect against fire and electrocution:
Disconnect power BEFORE installing or servicing controller.
NEVER connect a keypad/reader or lock to doors without first
consulting the applicable fire code.
You MUST consult with, and get approval from, local fire
officials BEFORE installing locks or devices on ANY doors that
may be fire exits.
Use of egress push buttons may not be legal. Single action
exits may be required.
ALWAYS obtain proper permits and approvals in writing
BEFORE installing equipment.
Safety
Safety Symbol and Signal Word Review
When you see these Safety Symbols and Signal Words on
the following pages, they will alert you to the possibility of
serious injury or death if you do not comply with the warnings
that accompany them. The hazard may come from something
mechanical or from electric shock. Read the warnings carefully.
When you see this Signal Word on the following pages, it will alert
you to the possibility of damage to your property or product if you
do not comply with the cautionary statements that accompany it.
Read them carefully.
MECHANICAL
ELECTRICAL
PRE-INSTALL NETWORKWIRING ACCESS CONTROLINTRODUCTION INSTALL
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer
or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
UNDERWRITERS LABORATORIES (UL) COMPLIANCE
The CAP2D complies with the UL294 Standard for access control
units with the following restrictions:
The system relay contacts shall not be confi gured in the fail
secure mode unless permitted by the local authority having
jurisdiction and shall not interfere with the operation of panic
hardware.
The Ethernet port is for supplemental use only, the unit will
continue to operate standalone if the network connection is interrupted.
This unit can be powered over Ethernet via PoE Compatible hardware. Where used, any PoE power source must be UL294 Listed.
All interconnecting devices must be UL Listed.
DO NOT INSTALL THE SYSTEM IN THE FAIL SECURE MODE
UNLESS PERMITTED BY THE LOCAL AUTHORITY HAVING
JURISDICTION. Doing so may cause interference with the
operation of panic hardware.


Product specificaties

Merk: Liftmaster
Categorie: Niet gecategoriseerd
Model: CAP2D

Heb je hulp nodig?

Als je hulp nodig hebt met Liftmaster CAP2D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Liftmaster

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo

Festo VPPI Handleiding

21 November 2024
Festo

Festo SFAB Handleiding

21 November 2024
Festo

Festo SFAH Handleiding

21 November 2024
Festo

Festo DRRD-12 Handleiding

21 November 2024
Festo

Festo SDE3 Handleiding

21 November 2024
Festo

Festo SFTE Handleiding

21 November 2024
Festo

Festo CRVZS-5 Handleiding

21 November 2024