Lexon Tamo Handleiding

Lexon Radio Tamo

Lees hieronder de 📖 handleiding in het Nederlandse voor Lexon Tamo (5 pagina's) in de categorie Radio. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
Design by Manuel Simonelli & Andrea Quaglio
LA131
TAMO
1
3
6
5 7
4
(A) (B) (C)
2
IN THE BOX
1x Tamo 1x USB-C charging cable 1x User manual
OVERVIEW
1. Speaker
2. Touch area
3. Wireless charging receiver
4. Button
CHARGING via USB-C cable
1. Plug the provided USB Type-C cable into
the charging port of Tamo.
2. Plug the other end of the cable into any
computer or any DC 5V power charger.
A full charge takes approximately 3 hours.
PAIRING
1. Enable Bluetooth® on your mobile device.
2. Press and hold Tamo’s power button for 3 seconds.
3. Select “LEXON TAMO” from the Bluetooth® list on your mobile device.
4. Start playing music.
UNIFIED AUDIO NETWORK
To create a unified audio network, follow the instructions below:
1. Follow the pairing instructions described above.
2. Then switch on as many Tamo speakers as you want and press the button twice on the
first Tamo you've paired. The other devices will automatically connect to the same network.
3. Once the audio network is established, the Tamo speaker you've first paired (Master
device) will remain illuminated, while the LEDs on the other speakers will flash slowly.
Once the network has been successfully set up, you can add other speakers to the
network by simply switching them ON. They'll pair up automatically.
Important note: Only the Master device with the continuously illuminated Blue LED can
control audio functions. Use the master device for actions like play/pause, track change,
or volume adjustment.
To completely disconnect the network, press the master device button twice.
To remove a speaker from the network, double-press the button on the speaker you wish to remove.
OPERATIONS
LED INFORMATION
SAFETY PRECAUTIONS
• Make sure to respect the technical specifications for charging and never use a power
adapter delivering more voltage output than the one indicated to avoid any irreversible
damage to the internal circuit (DC Input: 5V)
• Do not place the device near heat sources such as heaters or radiators.
• Do not expose the device to water and keep away from corrosive liquids.
• Do not open the device or attempt to disassemble the internal parts or modify it in any way.
PRODUCT SPECIFICATIONS
Material: Aluminum / ABS / Silicone
Weight: 0.12 lbs / 55 g
Dimensions: Ø2.09 x 1.65" / Ø5.3x 4.2cm
Speaker power: 3W
Bluetooth® version: 5.0
Bluetooth® range: 10m
Frequency range: 2.402 – 2.480 GHz
Battery capacity: 300 mAh
5. LED for Bluetooth® & Charging status
6. USB-C port
7. Microphone
Battery voltage: 3.7V
Input voltage: 5V
Playtime: 3h
Charging time: 1h
Charging system:
USB Type-C or wirelessly
Operating temperature: 0°C 35 °C
International warranty: 1 year
CHARGING via a wireless charging pad
1. Place Tamo in the center of the
wireless charging pad (not included).
Check the charging LED to confirm
TAMO is properly charging
2. Remove the device once the
battery is fully charged.
Button operations
Turn ON/OFF speaker
Take a photo
Audio network pairing
Unpairing
Play / Pause (A)
Next track (B)
Volume adjustment (C)
Answer / End a call
Press & hold
Short press
Double press
Short touch
Double touch
Touch & hold
Short touch
Touch operations
Double press the master
device
Connected / Master
device
Pairing status
Ready to pair Charging
Fully charged
Blue LED flashing slowly
Blue LED ON
Red LED ON
Red LED OFF
Charging status


Product specificaties

Merk: Lexon
Categorie: Radio
Model: Tamo

Heb je hulp nodig?

Als je hulp nodig hebt met Lexon Tamo stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Radio Lexon

Handleiding Radio

Nieuwste handleidingen voor Radio