LC-Power ATX Case 7018B Handleiding

LC-Power Niet gecategoriseerd ATX Case 7018B

Lees hieronder de 📖 handleiding in het Nederlandse voor LC-Power ATX Case 7018B (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 200 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

ATX CASE

7018B

Thank you for purchasing this case from LC-Power.

Please read the manual carefully before usage.

Specifications may be subject to change without prior notice.

This product has a two year warranty period from the date of purchase, service issues will be handled by your dealer.

If the case is damaged due to improper operation, the warranty period expires immediately.

The case supports most SSDs/HDDs and mainboards. Incompatibility to a certain individual SSD/HDD/MB is not a reason

for repair or replacement.

We recommend parental guidance to children using the device, under strict observance to the security notes above.

Check www.lc-power.com or contact us by e-mail at support@lc-power.com.

Silent Power Electronics GmbH

Formerweg 8

47877 Willich

Germany

support@lc-power.com

www.lc-power.com

Remove the thumbscrews and slide out the side panels. Position the power supply unit on the bottom of the case and

fix it with screws.

Fan facing downwards:

Make sure thet there is enough space for air-intake between

the bottom of the case and the surface where the case is located.

Clean the dust filter regularly to ensure an adequate airflow!

Place the motherboard standoffs based on the manufacturer specs.

Fix the motherboard with screws.

NOTE: Not every motherboard is a standard one, please place the

standoffs according to your motherboard.

Unscrew the slot cover to remove them.

Install the add-in PCI card and secure it with screws.

Remove the front cover by pulling from the bottom and remove

the bay cover.

Mount in the external 5,25“ device into the chassis and fix the

ODD with screws.

Fix the 2,5“ HDDs/SSDs with screws from the back side of the chassis.

Insert the 3,5“ HDD into the HDD rack. 2,5“ HDDs/SSDs must be fixed with screws onto the rack.

Insert the HDD rack into its slot in the chassis.

Connect the HDD with the correct cables to the mainboard.

Product specificaties

Merk:	LC-Power
Categorie:	Niet gecategoriseerd
Model:	ATX Case 7018B
Kleur van het product:	Zwart
Gewicht:	5270 g
Breedte:	200 mm
Diepte:	435 mm
Hoogte:	435 mm
Soort:	PC
Vormfactor:	Midi Tower
Aantal USB 2.0-poorten:	1
Audio-ingangen:	Ja
Audio-uitgang:	Ja
Materiaal:	Metaal
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	2
Vermogenstoevoer inclusief:	Nee
Aantal 2.5" bays:	2
Aantal 5.25" bays:	2
Aantal 3.5" bays:	2
Ondersteunde HDD-groottes:	2.5, 3.5 "
Aantal uitbreidingssleuven:	7
Anti-stof filter:	Ja
Supported motherboard form factors:	ATX, Micro ATX, Mini-ITX
Zijraam:	Ja
Maximum CPU cooler hoogte:	155 mm
Maximum grafische kaart lengte:	380 mm
Maximale aantal ventilators voorkant:	2
Voorste ventilators ondersteunende diameters:	120 mm
Maximaal aantal ventilators achterkant:	1
Achterkant ventilators ondersteunende diameters:	120 mm
Maximaal aantal ventilators zijkant:	1
Zijkant ventilators ondersteunende diameters:	120 mm