Lazer Urbanize MIPS Handleiding

Lazer Niet gecategoriseerd Urbanize MIPS

Lees hieronder de 📖 handleiding in het Nederlandse voor Lazer Urbanize MIPS (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

1. How to use the rechargeable rear LED light

For a video guide to help with the following steps please

go to the following URL and click on how to videos:

www.youtube.com/user/LazerSport

URBANI Z E

This LED complies with Part 15 of

the FCC Rules. Operation is subject

to the following two conditions: (1)

This device may not cause harmful

interference, and (2) this device must

accept any interference received,

including interference that may cause

undesired operation.

The Lazer Urbanize comes with a

rechargeable rear LED light which is

designed to t perfectly in the rear

of the helmet.

1) To install in the helmet, simply align

the LED light with the rear hole. First

push the top in and then the bottom

as shown in diagram 1A.

2) To turn the light on, simply short

press the logo on the front of the light.

To cycle between the light modes short

press the same button. To turn of the

light cycle through all light modes until

the light is o.

Light modes:

1. Constant

Run time 8 hours

2. Flashing

Run time 26 hours

3. Pulsing

Run time 10 hours

4. O

1A)

2. How to recharge the rear LED light

The LED light in the Lazer Urbanize

will need to be charged before use.

After approximately 8 hours of use

on constant mode you will need to

recharge your battery.

To do this you will need to remove

it from the helmet.

1. Reach into the helmet, push the

head basket away slightly and push

the light out of the back of the helmet

as shown in diagram 2A.

3. Now using the cable provided,

plug the battery in to a standard 5V

USB power source (smartphone

charger, computer USB port) of a

renowned manufacturer. Charge for

approximately 2 hours to fully charge

the light. During charging time, the

battery signal led will turn solid red and

when it is 100% charged, the charging

LED will go out. Feel free to charge

work while your helmet is

locked to you bike using

lock hole.

URBANI Z E

Thank you for choosing the Lazer

helmet. You have made an excellent

choice that will help to reinforce your

safety while cycling: the sport for which

this helmet has been designed. Lazer

helmets conform to the strict criteria

of international standards.

Wearing a helmet may reduce the

seriousness of injuries to the head that

may occur during a sports accident. For

this reason, it is important to use this

protective gear properly.

Instructions for use and care

1) No helmet can protect the wearer

against all possible impacts.

2) The helmet is designed to be retained by

a strap under the lower jaw.

3) To be eective, a helmet must t and

be worn correctly. To check for correct

t, place helmet on head and make any

adjustments indicated. Securely fasten

retention system. Grasp the helmet and try

to rotate it to the front and rear. A correctly

tted helmet should be comfortable and

should not move forward to obscure vision

or rearward to expose the forehead.

4) No attachments should be made to the

helmet except those recommended by the

helmet manufacturer.

5) The helmet is designed to absorb shock

by partial destruction of the shell and liner.

This damage may not be visible. Therefore,

if subjected to a severe blow, the helmet

should be destroyed and replaced even

if it appears undamaged.

6) The helmet may be damaged and

rendered ineective by petroleum and

petroleum products, cleaning agents,

paints, adhesives and the like, without the

damage being visible to the user.

7) A helmet has a limited lifespan in use

and should be replaced when it shows

obvious signs of wear.

8) This helmet should not be used by

children while climbing or doing other

activities where there is a risk of hanging or

strangulation if the child gets trapped whilst

wearing the helmet.

9) This helmet is designed only for the

following activity: cycling, roller skate,

skateboard. It is not designed to be used

with mopeds or any other type of sport,

mechanical or not.

Lamorinièrestraat 33-37

2018 Antwerp - Belgium

www.lazersport.com

For other and more helmet

instructions, please refer to

the owner manual included

with the helmet.

Product specificaties

Merk:	Lazer
Categorie:	Niet gecategoriseerd
Model:	Urbanize MIPS
LED backlight:	Ja
Geslacht:	Unisex
Materiaal:	Nylon, Polycarbonate (PC)
Aantal per verpakking:	1 stuk(s)
Sluitingtype:	Fidlock magnetische gesp
Ventilatie:	Ja
Hoofdkleur van product:	Geel
Levensfase van consument:	Volwassene
Activiteit:	Wielrennen
Helmvizier:	Ja
Type sporthoofdkleding:	Helm
Aantal ventilatiegaten:	6
Verstelbare pasvorm:	Ja
Verwijderbaar vizier:	Ja
Materiaal beschermingsschuim:	Polystyreenschuim
Merkspecifieke beschermende kenmerken:	MIPS