Lascar Electronics EL-USB-CO Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Lascar Electronics EL-USB-CO (24 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
www.lascarelectronics.com
This Help Guide refers to the EasyLog USB Data Loggers
Issue 1_06-2016
Page 1 of 24
EASYLOG SOFTWARE GUIDE
EasyLog USB Software Guide
Contents
1. Downloading and Installing the EasyLog USB Software
2. Hardware Preparation
3. Software Quick Start Guide
Starting the EasyLog USB Software
Data Logger Name, Scale, Calibration and Logging Rate
Configuring Alarm Levels
Configuring Start Options
Configuration Completed
4. Detailed Software Description
Main Screen
Data Logger Name, Scale, Calibration and Logging Rate
Configuring Alarm Levels
Configuring Start Options
Configuration Completed
View Data Logger Status
Stop Logging and Download Data
5. Graphing
Menu Items (View option)
6. Graphing Toolbar - Producing Professional Reports
7. Error Messages
Not all of the features described in this document apply to all of the data loggers, consult the relevant data
logger datasheet for technical specifications, product information and important safety notices.
Datasheets are available from www.lascarelectronics.com.
www.lascarelectronics.com
This Help Guide refers to the EasyLog USB Data Loggers
Issue 1_06-2016
Page 2 of 24
EASYLOG SOFTWARE GUIDE
1. Downloading and Installing the EasyLog USB Software
Download the latest version of the EasyLog USB software from www.lascarelectronics.com.
EasyLog USB is compatible with the following 32bit and 64bit operating systems (other operating systems
are currently not supported):
- Microsoft Windows 7
- Microsoft Windows 8 and 8.
- Microsoft Windows 10 (32bit and 64bit)
Install EasyLog USB on your PC by double-clicking the software file that you have downloaded. If Windows
asks you for permission to run and install this software, then give your consent. The software will install itself
without the need for much user intervention. An EasyLog USB icon will appear on the desktop after the
software installation is complete.
2. Hardware Preparation
Remove the cap
Most EasyLog data loggers require you to remove a translucent cap to gain access to the USB connector.
The EL-OEM-3 requires the addition of your own purpose-built USB cable, unless it is used with
EL-OEM-TEST.
Install the battery in the data logger
Consult your EasyLog module’s technical datasheet for the correct battery installation procedure, the use of
appropriate batteries, and the safe handling and disposal of batteries in accordance with local regulations.
If the data logger contains a rechargeable battery, then connect this data logger to an active USB port to
recharge the battery. Consult the data logger’s technical datasheet for the correct and safe battery charging
procedure and charging state indication.
www.lascarelectronics.com
This Help Guide refers to the EasyLog USB Data Loggers
Issue 1_06-2016
Page 3 of 24
EASYLOG SOFTWARE GUIDE
If the data logger does not feature a battery, then consult the data logger’s technical datasheet for the
correct and safe method to power that data logger.
If a low battery warning appears on-screen while using EasyLog USB, then replace or re-charge the battery
(depending on the battery type fitted) before starting a new data logging exercise.
Plug the data logger into a free USB port
Insert the data logger into a free USB port on your PC. The computer will automatically detect the presence
of the data logger and start the hardware installation process.
3. Software Quick Start Guide
Starting the EasyLog USB Software
Double-click the EasyLog USB icon on the desktop to launch the control software. You will be presented
with three round buttons on the main screen. Click on the green button to set up and start the data logger
and complete the following procedure.
Note: A data logger may already contain readings that have not been downloaded, in which case
you will receive a warning message. If this is sample data in a new data logger then click on OK to
continue, else click on Cancel and then click on the red button to download the readings to the PC.
Then click on the green button again to set up and start the data logger.
Data Logger Name, Scale, Calibration and Logging Rate
- enter the Logger Name
- select the required Scale and configure any other options
- select the Logging Rate
- click on Next


Product specificaties

Merk: Lascar Electronics
Categorie: Niet gecategoriseerd
Model: EL-USB-CO

Heb je hulp nodig?

Als je hulp nodig hebt met Lascar Electronics EL-USB-CO stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Lascar Electronics

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd