LaCie 12big Rack Fibre Handleiding

LaCie Server 12big Rack Fibre

Lees hieronder de 📖 handleiding in het Nederlandse voor LaCie 12big Rack Fibre (13 pagina's) in de categorie Server. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/13

LaCie 12big Rack Fibre and expansion Table of Contents

Quick Install Guide page 1

Table of Contents

1. Introduction ............................................................................................................. 2

1.1. Safe Handling .............................................................................................................................. 2

1.2. Safety .......................................................................................................................................... 2

1.3. Rack System Precautions ............................................................................................................... 2

1.4. Battery Disposal ........................................................................................................................... 3

1.5. Power Supply ............................................................................................................................... 3

1.6. ESD Precaution ............................................................................................................................ 3

1.7. SFP Optical Transceiver Precaution ................................................................................................ 3

2. Preparation ............................................................................................................. 4

2.1. Before you begin .......................................................................................................................... 4

2.2. Unpackaging the Storage System .................................................................................................. 4

3. Rack Installation ...................................................................................................... 4

3.1. Rack Installation Prerequisites ........................................................................................................ 4

3.2. Formatting for Mac Users ............................................................................................................. 5

3.3. Installation Preparation ................................................................................................................. 5

3.4. Rack Installation Procedures ....................................................................................................... 5-6

4. Disk Rules and Conﬁguartion .................................................................................. 7

4.1. Disk Slot Arrangement .................................................................................................................. 7

4.2. Disk Conﬁguration Rules............................................................................................................... 7

5. Setup and Cabling ................................................................................................... 7

5.1. SFP Installation ............................................................................................................................ 7

5.2. Ethernet Connection (Embedded StorView) ..................................................................................... 7

5.3. Connecting the Storage System to the Host ................................................................................. 8-9

6. Completing the Installation ..................................................................................... 9

6.1. Connecting the Power Cords ......................................................................................................... 9

6.2. Powering On The System .............................................................................................................. 9

6.3. Initial Setup of Embedded StorView ........................................................................................... 9-11

6.4. Setting up the Embedded StorView Module: Mac OS 11 ..................................................................

EN English

LaCie 12big Rack Fibre and expansion Introduction

Quick Install Guide page 2

Introduction1.

European Regulations

This equipment complies with European Regulations EN

55022 Class A: Limits and Methods of Measurement of Radio

Disturbance Characteristics of Information Technology

Equipments and EN50082-1: Generic Immunity.

USA Federal Communications Commission (FCC)

This equipment has been tested and found to comply with

the limits for a class A digital device, pursuant to part 15 of

the FCC rules.

Safe Handling1.1.

• The enclosure can weigh up to 32 kg (70 lb.). Do not try to

lift it by yourself.

• Before moving the enclosure, always remove the Power

Supplies, Cooling Fan Module, I/O Modules and Disk Disks

to minimize the weight.

• Unplug the Power Supplies and any other cables before you

move the enclosure.

• Do not lift the enclosure by the handles of the Power

Supplies or Cooling Fan Modules. They are not designed

to support the weight.

Safety1.2.

• All plug-in and blank modules are part of the re enclosure

and must only be removed when a replacement can be

immediately installed. The enclosure must not be operated

without all modules in place.

• Unplug the Power Supplies if you believe the system has

become damaged in any way.

• The enclosure must only be operated from a power supply

input voltage range of 100 - 120V or 200 - 240V.

• In order to comply with applicable safety, emission and

thermal requirements no covers should be removed and all

bays/slots must have plug-in modules installed.

• The power cords are the main power disconnect. Ensure

that the socket outlets are located near the equipment and

are easily accessible.

• When powered by multiple power sources, disconnect all

supply power for complete power isolation.

• A safe electrical ground connection must be provided to the

power cords. Check the grounding of the enclosure before

applying power.

• Provide a suitable power source with electrical overload

protection to meet the requirements established by the

speciﬁcations.

• Only connect the enclosure to a power source that has

overcurrent protection of 20A or less.

• The equipment must be operated with two power supply

modules.

• To prevent overheating do not operate the enclosure with

one power supply removed for more than 30 minutes.

Rack System Precautions1.3.

The following safety requirements must be

considered when mounting in a rack cabinet.

• The rack design should support the total weight of the

installed enclosures and incorporate stabilizing features

suitable to prevent the rack from tipping or being pushed

over during installation or normal use.

• When loading a rack, ll the rack from the bottom up and

empty from the top down.

• Do not slide more than one enclosure out of the rack at a

time to avoid the danger of the rack toppling over.

• The rack design should take into consideration the

maximum enclosure operating ambient temperature which

is 40°C (104°F).

• The system must be operated with low pressure rear ex-

haust installation (back pressure created by rack doors and

obstacles not to exceed 5 pascals (0.5 mm water gauge)).

• The rack should have a safe electrical distribution system.

It must provide over-current protection for the enclosure and

must not be overloaded by the total number of enclosures

installed. The electrical power consumption rating shown on

the nameplate should be observed.

• The electrical distribution system must provide a reliable

ground for each enclosure in the rack.

LaCie 12big Rack Fibre and expansion Introduction

Quick Install Guide page 3

• Each power supply in each enclosure has a ground

leakage current of 1.8 mA max. at 60 Hz, 264V. The

design of the electrical distribution system must take into

consideration the total ground leakage current from all

supplies in all the enclosures. The rack may require labeling

with “HIGH LEAKAGE CURRENT. Ground (earth) connection

is essential before connecting a supply.”

• The rack when congured with the enclosures must meet

the safety requirements of UL 60950-1 and IEC 60950-1/

EN60950-1.

Battery Disposal1.4.

cauTion: There is a danger of explosion if the RAID

Controller battery is disposed of improperly. Dispose of used

batteries in accordance with the manufacturer’s instructions and

national regulations.

Power Supply1.5.

WaRninG: Do not remove the covers from the Power

Supplies. Danger of electric shock inside. Return them to your

supplier for replacement.

cauTion: If this equipment is used in a manner not speciﬁed

by the manufacturer, the protection provided by the equipment

may be impaired.

ESD Precaution1.6.

WaRninG: Ensure that you have installed and checked a

suitable anti-static wrist or ankle strap and observe all

conventional ESD precautions when handling modules and

components. Avoid contact with backplane components and

module connectors, etc. ESD damage is not covered by warranty.

SFP Optical Transceiver 1.7.

Precaution

iMPoRTanT noTe: Class 1 Laser Product. The optical SFP

transceiver modules must be a UL (or other North American

NRTL) RECOGNIZED COMPONENT, and must be approved

by TUV (or other European Product Safety test house) and

the laser in the module must comply with Laser Class 1, US

21 CFR (J) and EN 60825-1. If optical modules are to be

provided and installed by the end user, they must also comply

with the standards listed above.

iMPoRTanT noTe: The optical modules provided and

installed by the end user must be a UL (or other North America

NRTL) RECOGNIZED COMPONENT and must be approved by

TUV (or other European product safety test house), and the laser

in the module must comply with Laser Class 1, US 21 CFR (J)

and EN 60825-1).

cauTion: The RJ45 socket on the RAID Controller is for

Ethernet connection only and must not be connected to a

telecommunications network.

Product specificaties

Merk:	LaCie
Categorie:	Server
Model:	12big Rack Fibre
Gewicht:	32200 g
Stroomvoorziening:	100-240V
Aantal Ethernet LAN (RJ-45)-poorten:	4
Compatibele besturingssystemen:	Windows 2003\nLinux\nMac OS 10.4 +
Netwerkfuncties:	Gigabit Ethernet
Capaciteit opslag-drive:	- GB
Totale geïnstalleerde opslagcapaciteit:	6 TB
Hoogte, in bedrijf:	0 - 2133 m
Hoogte bij opslag:	0 - 12192 m
Afmetingen (B x D x H):	443.7 x 550 x 87.9 mm
Link/Act LED:	Ja
Opslag schijf-interface:	SATA II
Aantal storage drives ondersteund:	12
Schokbestendigheid:	5 G
Schokbestendigheid (buiten gebruik):	30 G
Stroomverbruik (typisch):	300 W
Bedrijfstemperatuur (T-T):	5 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 80 procent
Connectivity LEDs:	Ja
Fibre Channel:	Ja