La Crosse WS-9160U-IT Handleiding

La Crosse Weerstation WS-9160U-IT

Lees hieronder de đź“– handleiding in het Nederlandse voor La Crosse WS-9160U-IT (6 pagina's) in de categorie Weerstation. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
WS-9160U-IT www.lacrossetechnology.com/support Page | 1
Model: WS-9160U-IT
Instruction Manual
DC: 112515
WIRELESS THERMOMETER
Battery
compartment
2 “AA”
batteries
TX29U-IT
Temperature
Sensor
2-“AAA”
batteries
Indoor
Temp.
Wall
Hang
Hole
Pull out
stand
Manual
set time
Outdoor
Temp. w/
Channel
indicator
WS-9160U-IT www.lacrossetechnology.com/support Page | 2
Get Started
Step 1: Insert 2 fresh AA, batteries into the TX29U-IT
sensor according to the polarity marked in the battery
compartment.
Step 2: Insert 2 fresh AAA, Alkaline batteries into the wireless
thermometer according to the polarity markings.
Step 3: After 5 minutes place sensor outside in a shaded location.
Set 12/24 Hour, Temperature Units, Time
1. Hold the SET button to enter time set mode.
2. Press the + button to adjust values.
3. Press the SET button to confirm adjustments and move to next
item.
Settings order:
1. 12/24 Hour Format
2. Hour
3. Minutes
Note: 12h = ÂşFahrenheit & 24h = ÂşCelsius
Press SET to exit, or wait 30 seconds without pressing buttons to
return to the normal time display.
Fahrenheit/Celsius
The temperature is displayed in Fahrenheit when in 12-hour time
format and in Celsius in 24-hour time format. Use the SET menu
above to select 12-hour or 24-hour time format.
1. Hold the SET button to enter time set mode.
2. 12h or 24h will flash.
3. Press the + button to change the time format
(temperature display).
4. Press the SET button to confirm.
Note: 12h = ÂşFahrenheit & 24h = ÂşCelsius
WS-9160U-IT www.lacrossetechnology.com/support Page | 3
Low
Battery
Icons
View/Reset MIN/MAX Readings
1. Press the MIN/MAX button once to view the minimum indoor
and outdoor temperature.
2. Press the MIN/MAX button once more to view the maximum
indoor and outdoor temperature.
3. Hold the MIN/MAX button for 3 seconds to reset all MIN/MAX
temperatures.
Note: When using multiple sensors, press the CH button then the
MIN/MAX button to view the MIN/MAX reading on a different
channel
Outdoor Temperature Reception Icon/Channel Indicator
• The outdoor temperature reception icon will flash every
second when searching for the sensor.
• Once connected, reception icon will show for 3 seconds
once the outdoor temperature update is received.
• The channel indicator will show below the outdoor
temperature.
• Press the CH button to view sensors on other channels.
Note: Channel 1 will not show if only one sensor is
connected.
Setup with Multiple Sensors
1. Insert batteries into sensor 1
2. Insert batteries into wireless thermometer
3. When outdoor temperature appears, insert batteries into
sensor 2
4. When channel 2 appears insert batteries into sensor 3
5. Keep station and all sensors together for 15 minutes.
Low Battery Icon
• When the TX icon is displayed replace
batteries in the outdoor sensor.
• When the RX icon is displayed replace
batteries in the wireless thermometer .
Outdoor
Reception
Icon
2
Outdoor
Channel
Icon


Product specificaties

Merk: La Crosse
Categorie: Weerstation
Model: WS-9160U-IT

Heb je hulp nodig?

Als je hulp nodig hebt met La Crosse WS-9160U-IT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Weerstation La Crosse

Handleiding Weerstation

Nieuwste handleidingen voor Weerstation