Kreg Straight Edge Guide Handleiding

Kreg Zaagmachine Straight Edge Guide

Lees hieronder de 📖 handleiding in het Nederlandse voor Kreg Straight Edge Guide (149 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/149
English 2
French (N. America) 17
Spanish (N. America) 33
French 49
Spanish 65
German 81
O W N E R S M A N U A L
We’re here to help.
We want you to have an exceptional project building experience.
If you have questions or need support, please get in touch.
1-800-447-8638 technicalsupport@kregtool.com |
Tell us about your experience.
Your opinion counts. And we’re always looking for ways to improve.
Share your feedback so we can keep growing and innovating for you.
www.kregtool.com/feedback
WARNING Every user must read and follow instructions and safety precautions in this manual.
Failure to do so could result in serious injury. Save manual for future reference.
Straight Edge Guide
Manual applies to Item #
KMA4500 and KMA4500-E (Straight Edge Guide),
KMA4600 and KMA4600-E (Straight Edge Guide Extension),
KMA4700 and KMA4700-E (Straight Edge Guide XL)
2
Safety Precautions
WARNING Before using a power tool with this product, read and follow the
tool manufacturers instructions and safety precautions in addition to the safety
precautions below to reduce risk of serious injury from hazards such as re, electric
shock, or moving the blades/bits.
Follow your power tool manufacturers instructions and safety precautions.
Always wear personal protective equipment required by the power tool
manufacturer.
Do not allow familiarity gained from frequent use of your tools to replace safe
work practices. A moment of carelessness is sufcient to cause severe injury.
Avoid awkward hand positions where a sudden slip could cause contact with the
blade or cutting tool.
WARNING Do not operate this tool or any machinery while under the inuence of
drugs, alcohol, or medications.
WARNING This product can expose you to chemicals including Carbon 1333-86-4
and other chemicals, which are known to the State of California to cause cancer and
reproductive harm. For more information go to www.P65Warnings.ca.gov.
The labels on the guide rail may include these symbols:
Be cautious of
potential pinch point.
Wear proper eye,
ear, and respiratory
protection.
Keep hands and body away
from and to the side of the
blade. Contact with blade will
result in serious injury.
Read the
instructions.
Table of Contents
Safety Precautions 2 . . . . . . . . . .
Pre-Assembly . . . . . . . . . . . . . 3
Recommended Tools/Materials
(NotIncluded) 3 . . . . . . . . . . . .
Hardware/Tools Included 3 . . . . . .
Product Description . . . . . . . . . 4
Assembly . . . . . . . . . . . . . . . 5
Calibration. . . . . . . . . . . . . . . 8
Operation 11 . . . . . . . . . . . . . .
Trim Router Calibration 14. . . . . . .
Trim Router Operation . . . . . . . 14
Care and Maintenance 14 . . . . . . .
Troubleshooting 15. . . . . . . . . . .
Assembly 15 . . . . . . . . . . . . .
Set Up and Operation 15. . . . . . .
3
Pre-Assembly
Review this section before you begin. Ensure you have all tools and materials on
hand. Compare the package with the items listed in the Hardware Included and
Product Description sections. Ensure you have a clean, at area for joining the guide
rails. If any item appears missing or lost, do not use this product. Contact Technical
Support or return product to place of purchase.
Recommended Tools/Materials (Not Included)
#3 Phillips Screwdriver Straight Edge or Level Pencil
Hardware/Tools Included
DD
BB
CC FF
EE
AA
Straight Edge Guide Straight Edge Guide Extension Straight Edge Guide XL
AA - Set screws x 8 AA - Set screws x 8 AA - Set screws x 24
BB - Cutline indicator stop
thumb screws x 2 n/a BB - Cutline indicator stop
thumb screws x 2
CC - Cutline indicator stop
nuts x 2 n/a CC - Cutline indicator stop
nuts x 2
DD - Hex wrench x 1 n/a DD - Hex wrench x 1
EE - Handle bolt x 1 n/a EE - Handle bolt x 1
FF - Handle nut x 1 n/a FF - Handle nut x 1


Product specificaties

Merk: Kreg
Categorie: Zaagmachine
Model: Straight Edge Guide

Heb je hulp nodig?

Als je hulp nodig hebt met Kreg Straight Edge Guide stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Zaagmachine Kreg

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine