Kramer OSP-SM10S Handleiding

Kramer Niet gecategoriseerd OSP-SM10S

Lees hieronder de 📖 handleiding in het Nederlandse voor Kramer OSP-SM10S (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

OSP-SM10S Quick Start

P/N:

2900- 301238QS

Rev:

Scan for full manual

OSP-SM10S Quick Start Guide

This guide helps you install and use your OSP-SM10S for the first time.

Go to www.kramerav.com/downloads/OSP-SM10S to download the latest user manual and check if

rmware upgrades are available.

Step 1: Check in the b what’s ox

2 OSP-SM10S 10G SFP+ Simplex Transceivers (A and B)

1 Quick start guide

Step 2: Get to know your -SM10S OSP

Feature

Function

LC Connectors

For connecting ber optic cable. Covered with protective cap when not in use.

Bail (Handle)

Pull down the handle for easy removal of the transceiver from the optical device.

Protective Cap

Protects the LC connector from dust.

Note: When transporting or storing an unconnected device, keep the cap on to protect

against dust.

SFP+ Module Interface

Connects to the optical module SFP+ port.

Step 3: Safety Instructions

Warning: Class 1 Laser Product:

• Invisible laser radiation present.

• Avoid long-term viewing of laser.

• Avoid the use of magnifying viewing aids or instruments (such as binoculars, telescopes,

microscopes and magnifying lenses, but not spectacles or contact lenses).

• Avoid placing optical devices in the emitted beam that could cause the concentration of the

laser radiation to be increased.

• Ensure that the environment (e.g., maximum ambient temperature &

air ow) is compatible for the device.

• Avoid uneven mechanical loading.

• Appropriate consideration of equipment nameplate ratings should be

used for avoiding overloading of the circuits.

• Reliable earthing of rack-mounted equipment should be maintained.

Step 4: Operation and Installation Warnings

• designed to be used with LC(PC) and LC(UPC) cable connectors. Using an LC(APC) connector

OSP-SM10S is

causes poor performance and can damage the optical module connector.

• Always inspect and clean the connectors before you make a connection.

• Always use the connector housing to plug or unplug a ber cable.

• Never touch the end face of the ber connectors.

Step 5: Install the OSP-SM10S

Always install transceiver to one extension device and transceiver B to the other A

extension pairing device.

To install the 10G SFP+ Simplex Transceiver:

1. Make sure the bail is pushed up, in the closed position.

2. Insert the OSP SFP+ transceiver into the relevant optical device SFP+ slot

and push it in until it clicks.

3. Before connecting the optical ber cable, remove the protective cap and store

it in a safe place for future use.

To remove the 10G SFP+ Simplex Transceiver:

1. Pull the bail down to release the transceiver unit.

2. Pull the transceiver unit out by the bail from the optical device SFP+ slot.

3. If needed, put the protective cap back on.

For optimum range and performance use the recommended Kramer cables available at

www.kramerav.com/product/OSP-SM10S. Using third-party cables may cause damage!

Step 6: Technical Specications

Transceiver Wavelength:

A: 1270 DFB transmitter /1330 receiver nm

B: 1330 DFB transmitter /1270 receiver nm

Optical Fiber Line Type:

Single-mode

Optical Transmitter Type:

DFB

Typical Optical Transmission Power:

-5dBm

Typical Optical Maximum Receiver

Sensitivity:

-14dBm

Typical Optical Maximum Loss Budget:

9dB

Ports:

1 strand ber optic LC (PC/UPC) connector for reception and transmission

SFP+ compliant pluggable interface

Note: Do not use with LC(APC) connectors.

Data Rate:

10Gbps

Maximum Reach

24km

Standards Compliance:

IEEE 802.3 , SFF-8431, SFF- AE 8472

Laser Safety Compliance:

Laser Class I

Regulatory Certications:

FDA: CDRH 1040.10

TUV: EN60950-1:2006+A11+A1+A12+A2; EN60825-1:2014; EN60825-

2:2004+A1+A2

UL: 60950-1; CSA C22.2 No. 60950-1-07:2014

EMC CE: EN 55032:2010; EN 55024:2010

CB: IEC 60950-1 2nd Edition :2014

RoHS: Directive 2011/65/EU

Operating Temperature:

0° to 70°C

Storage Temperature:

-40° to 85°C

Humidity:

5% to 95% RH

Power Consumption:

Product Dimensions:

1.33cm x 5.7cm x 0.85cm (0.52" x 2.2" x 0.33") W, D, H

Product Weight:

0.018kg (0.04lbs)

Shipping Dimensions:

4.1cm x 12.6cm x 8.4cm (1.6" x 5" x 3.3") W, D H ,

Shipping Weight:

0.06kg (0.13lbs)

Specications are subject to change without notice at www.kramerav.com

Product specificaties

Merk:	Kramer
Categorie:	Niet gecategoriseerd
Model:	OSP-SM10S

Heb je hulp nodig?

Als je hulp nodig hebt met Kramer OSP-SM10S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Kramer

Kramer KAC-CAM-50M Handleiding

25 November 2024

Kramer RC-62 Handleiding

25 November 2024

Kramer KT-107-INWL Handleiding

25 November 2024

Kramer ACC3-12-SP Handleiding

25 November 2024

Kramer KC-Virtual Brain1 Handleiding

25 November 2024

Kramer VS-34FD Handleiding

25 November 2024

Kramer VS-42HDCP Handleiding

25 November 2024

Kramer VS-84H2 Handleiding

25 November 2024

Kramer RC-208 Handleiding

25 November 2024

Kramer RK-UT1 Handleiding

25 November 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

D-Link DWA-556 Handleiding

25 November 2024

Royale RY32KMELODA Handleiding

25 November 2024

Platypus GravityWorks 2.0L Handleiding

25 November 2024

Dahua Technology N488L64A Handleiding

25 November 2024

Z CAM Timecode Adapter Handleiding

25 November 2024

Kogan KAM2CL2230A Handleiding

25 November 2024

Pentatech ACL15 Handleiding

25 November 2024

Studiologic FP50 Handleiding

25 November 2024

Hotone Ampero Press Handleiding

25 November 2024

Hammond EXP-100F Handleiding

25 November 2024