Kramer OSP-MM1 Handleiding

Kramer Niet gecategoriseerd OSP-MM1

Lees hieronder de 📖 handleiding in het Nederlandse voor Kramer OSP-MM1 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

OSP- MM1 Quick Start

P/N:

2900- 301181QS

Rev:

Scan for full manual

OSP- OSP-SM10 Quick Start Guide MM1,

This guide helps you install and use your OSP-MM1 / OSP-SM10 for the first time.

Go to www.kramerav.com/downloads/OSP-MM1 or www.kramerav.com/downloads/OSP-SM10 to

download the latest user manual and check if rmware upgrades are available.

Step 1: Check what’s in the box

OSP-MM1 Optical MM 850nm 10G SFP+ Transceiver or

OSP-SM10 Optical SM 1310nm 10G SFP+ Transceiver

1 Quick start guide

Step 2: Get to know your -OSP MM1 OSP-SM10 /

Feature

Function

Cap

Protects the LC connectors from dust.

Note: When transporting or storing an unconnected device, keep the cap on to protect

against dust.

LC Connectors

For connecting ber optic cables. Covered with protective cap when not in use.

Bail (Handle)

Pull down the handle for easy removal of the transceiver from the optical device.

SFP+ Device Interface

Connects to the optical device SFP+ port.

Step 3: Safety Instructions

Warning: Class 1 Laser Product:

• Invisible laser radiation present.

• Avoid long-term viewing of laser.

• Avoid the use of magnifying viewing aids or instruments (such as binoculars, telescopes, microscopes and magnifying

lenses, but not spectacles or contact lenses).

• Avoid placing optical devices in the emitted beam that could cause the concentration of the laser radiation to be

increased.

Step 4: Operation and Installation Warnings

• and are designed to be used with LC(PC) and LC(UPC) connectors. Using an LC(APC) OSP-MM1 OSP-SM10

connector causes poor performance and can damage the connector.

• Always inspect and clean the connectors before you make a connection.

• Always use the connector housing to plug or unplug a ber.

• Never touch the end face of the ber connectors.

Step 5: Install the OSP-MM1 -SM10 / OSP

To install the OSP SFP+ transceiver:

1. Make sure the bail is pushed up, in the closed position.

2. Insert the OSP SFP+ transceiver into the relevant optical device SFP+ slot

and push it in until it clicks.

3. Remove the protective cap and store it in a safe place for future use.

To remove the OSP SFP+ transceiver:

1. Pull the bail down to release the transceiver unit.

2. Pull the transceiver unit out by the bail from the optical device SFP+ slot.

3. If needed, put the protective cap back on.

For optimum range and performance use the recommended Kramer cables available at www.kramerav.com/product/OSP-MM1

or www.kramerav.com/product/OSP-SM10 Using third-party cables may cause damage!

Step 6: Technical Specications

OSP- MM1

OSP-SM10

Transceiver Wavelength:

850nm

1310nm

Optical Fiber Line Type:

Multi-mode

Single-mode

Optical Transmitter Type:

VCSEL

DFB

Typical Optical Transmission Power:

-2.5dBm

Typical Optical Maximum Receiver Sensitivity:

-11.1dBm

-14.4dBm

Typical Optical Maximum Loss Budget:

8.6dB

11.9dB

Ports:

2 strand ber optic LC (PC/UPC) connector for reception and

transmission

SFP+ compliant pluggable interface

Note: Do not use with LC(APC) connectors.

Data Rate:

10Gbps

Standards Compliance:

IEEE 802.3ae, SFF-8431

Laser Safety Compliance:

Laser Class I

Regulatory Certications:

FDA CDRH 21 CFR 1040 and Laser Notice No. 50

UL and CUL EN60950-2:2007

RoHS6 Directive 2002/95/EC

EMC EN 55022:2006+A1:2007; EN 55024:1998+A1+A2:2003

Operating Temperature:

0° to 70°C

Storage Temperature:

-40° to 85°C

Humidity:

5% to 95% RH

Power Consumption:

Product Dimensions:

1.33cm x 5.7cm x 0.85cm (0.52" x 2.2" x 0.33") W, D, H

Product Weight:

0.018kg (0.04lbs)

Shipping Dimensions:

4.1cm x 12.6cm x 8.4cm (1.6" x 5" x 3.3") H, W, D

Shipping Weight:

0.06kg (0.13lbs)

Specications are subject to change without notice at www.kramerav.com

Product specificaties

Merk:	Kramer
Categorie:	Niet gecategoriseerd
Model:	OSP-MM1

Heb je hulp nodig?

Als je hulp nodig hebt met Kramer OSP-MM1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Kramer

Kramer K-Bar Camera Bracket Handleiding

26 November 2024

Kramer RK-19 Handleiding

26 November 2024

Kramer OSP-MM1 Handleiding

26 November 2024

Kramer ASPEN-1616UX Handleiding

26 November 2024

Kramer CLS-AOCH/60 Handleiding

26 November 2024

Kramer RK-4U-HKS-10 Handleiding

26 November 2024

Kramer RK-13 Handleiding

26 November 2024

Kramer RC-2C Handleiding

26 November 2024

Kramer RK-KVM-2U-PP3 Handleiding

26 November 2024

Kramer VS-211HA Handleiding

26 November 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Livarno Lux IAN 071407 Handleiding

29 November 2024

Livarno Lux IAN 317128 Handleiding

29 November 2024

Livarno Lux IAN 049213 Handleiding

29 November 2024

Livarno Lux ST-1002 Handleiding

29 November 2024

Livarno Lux HG02489 Handleiding

29 November 2024

Livarno Lux HG02189 Handleiding

29 November 2024

Livarno Lux IAN 365198 Handleiding

29 November 2024

Livarno Lux IAN 367074 Handleiding

29 November 2024

Livarno Lux HG00701 Handleiding

29 November 2024

Livarno Lux IAN 337273 Handleiding

29 November 2024