Kramer KDS-17EN Handleiding

Kramer AV extender KDS-17EN

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Kramer KDS-17EN (4 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
KDS- 17EN Quick Start
P/N:
2900- 301678QS
Rev:
1
Scan for full manual
This guide helps you install and use your KDS-17EN for the first time.
Go to www.kramerav.com/downloads/KDS 17EN- to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check what’s in the box
KDS-17EN 4K60 4:4:4 AVoIP Encoder
1 Bracket set for each product
1 Quick start guide
Step 2: -Get to know your KDS 17EN
# ction Feature Fun
1
HDMI OUT Connector
Connect to loop the signal.
2
HDMI IN Connector
Connect to an HDMI source.
3
HOST USB Type B Port
Connect to a USB host, for example, a PC for KVM/USB support.
4
LCD Display
Use for device configuration such as unique channel/AV stream setting.
5
Menu Navigation
Button

Press to return to the previous menu.
ο‚„
Press to go to the next menu.

Press to move up to the next configuration parameter.
ο‚‚
Press to move down to the next configuration parameter.
Enter
Press to enter the menu and to accept changes.
6
LINK
LED
Lights Green
A link is established from KDS DEC- EN 17 to KDS-17 and is transmitting A/V signals.
Flashes Green
HDMI input is detected, but no valid AV signal is detected.
Off
No HDMI input is detected.
7
NET
LED
Off
No IP address is acquired.
Lights Green
A valid IP address has been acquired.
Flashes Green Very Fast
When a device identification command is received ind (F me), it flashes for 60 seconds.
Lights Yellow
No DHCP found, d subnet range 192.168.0.0evice an falls back to IP address in the /16.
Lights Red
Security is blocking IP access.
# ction Feature Fun
8
ON
LED
Lights Green
Device power is on.
Flashes Green Fast
Firmware is downloaded in the background.
Flashes Green Very Fast
A device identification command is sent (Flag me flashes for 60 seconds.), and
Lights Yellow
Device address (192.168.1.39).falls back to the default IP
Lights Red
Security is blocking IP access.
Flashes Red
On fallback address acquiring, flashes continuously in a slow 0.5/10sec cadence.
9
20 24- V DC Connector
Connect the optional 2 power adapter (purchased separately).0-24V DC
10
RESET Recessed Button
Press and hold for 10 seconds to reset the device to factory default values.
All LEDs flash.
11
LAN 1: 1G(PoE+)
RJ- 45 Port
Connect to the LAN. KDS-17EN is powered by PoE+ (power over Ethernet) delivered
through the LAN PoE+ port, unless the optional 20 24V DC power adapter is attached.-
Unicast: Connect for streaming either directly to a decoder or via LAN.
Multicast: Connect to multiple decoders.
12 LAN 2: SFP OUT IN Connector Plug in Small Form Factor Pluggable or copper transceiver for streaming an SFP ( ) optical
over cable.
13
RS- -232 3 pin Terminal Block
Connector
Connect to an RS 232 device to use - as a Gateway and bi-directional signal extension
(even when no AV signal is extended).
14
AUDIO IN/OUT 5-pin Terminal
Block Connector
Connect to a balanced analog stereo audio source/acceptor.
15
IR 3.5 Mini Jack
Connect to an IR sensor or emitter for bi directional signal extension (even when no AV -
signal is extended). Expected voltage for IR receiver - (3.3V).
16
USB Type A Charging Ports
(1 and 2)
Connect to USB devices, for example, to a speakerphone and webcam.
Step 3: -Mount KDS 17EN
Install
KDS-17EN
using one of the following methods:
β€’ Attach the rubber and place the unit on a flat surface.feet
β€’ Fasten a bracket (included) on each side of the unit and attach it to a flat surface
(see www.kramerav.com/downloads/KDS 17EN- ).
β€’ Mount the unit in a rack using the recommended rack adapter
(see www.kramerav.com/product/KDS 17EN- ).
β€’ Ensure that the environment (e.g., maximum ambient temperature &
air flow) is compatible for the device.
β€’ Avoid uneven mechanical loading.
β€’ Appropriate consideration of equipment nameplate ratings should be
used for avoiding overloading of the circuits.
β€’ Reliable earthing of rack-mounted equipment should be maintained.
To install the SFP MM/SFP SM Kramer recommended transceiver
:
1. Pull the bail out and remove the currently installed transceiver,
insert the protective cap and store in a safe place.
2. Make sure the bail of the new transceiver is pushed up, in the
closed position.
3. Insert the new transceiver into the relevant optical device SFP slot
and push it in until it clicks.
4. Remove the protective cap and store it in a safe place for future
use.
Warning: Connecting the SFP connector to an LC(APC) fiber connector
may cause poor performance and damage the connector!
Warning: Class 1 Laser Product
β€’ Invisible laser radiation present.
β€’ -Avoid long term viewing of laser.
β€’ Avoid the use of magnifying viewing aids or instruments (such as binoculars, telescopes, microscopes and
magnifying lenses, but not spectacles or contact lenses).
β€’ Avoid placing optical devices in the emitted beam that could cause the concentration of the laser radiation to
be increased.
To achieve specified extension distances, use the recommended Kramer cables
available at www.kramerav.com/product/KDS 17EN- .
Using third
- party cables may cause damage!
Step 4: Connect inputs and outputs
Always switch OFF the power on each device before connecting it to your KDS-17EN.
KDS
-17EN can stream 4K video, requiring a gigabit Ethernet switch for high quality performance, since the maximum
momentary transfer rate can reach 850Mbps. We recommend using AVoIP Ethernet switches that support
IGMP Snooping,
IGMP Querier
, L IGMP Immediate/Fast eave and Unregistered Filtering.Multicast
Connecting the audio input/output
To a balanced
stereo audio
source/acceptor:
To an unbalanced
stereo audio
acceptor:
To an unbalanced
stereo audio source:


Product specificaties

Merk: Kramer
Categorie: AV extender
Model: KDS-17EN

Heb je hulp nodig?

Als je hulp nodig hebt met Kramer KDS-17EN stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding AV extender Kramer

Kramer

Kramer TP-583Rxr Handleiding

25 November 2024
Kramer

Kramer KDS-17DEC Handleiding

25 November 2024
Kramer

Kramer TP-580TD Handleiding

25 November 2024
Kramer

Kramer TP-46N Handleiding

25 November 2024
Kramer

Kramer TP-126xl Handleiding

25 November 2024
Kramer

Kramer TP-125xl Handleiding

25 November 2024
Kramer

Kramer KW-14T Handleiding

25 November 2024
Kramer

Kramer KW-14R Handleiding

25 November 2024
Kramer

Kramer TP-574 Handleiding

25 November 2024
Kramer

Kramer TP-580RA Handleiding

25 November 2024

Handleiding AV extender

Nieuwste handleidingen voor AV extender