Kramer DTAXRC2-OUT2-F34 Handleiding

Kramer Niet gecategoriseerd DTAXRC2-OUT2-F34

Lees hieronder de 📖 handleiding in het Nederlandse voor Kramer DTAXRC2-OUT2-F34 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 174 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

VS- Card 34 Family Quick Start

P/N:

2 9 0 0 - 3 0 1 2 0 9 QS

Rev:

Scan for full manual

VS-34 Family Card Installation Sheet

Quick Start Guide

This guide helps you install and use your VS-34 Family Card for the rst time.

Go to www.kramerav.com/downloads/VS-34FD to download the latest user manual.

The attached card mounts in one of the slots on the rear of the chassis. Slots are numbered from left to right.

(The process for inserting cards is the same for all cards and the figures are for illustration purposes only.)

Input and output cards m be mounted in any slotay .

To install an I/O card:

1. Power o the machine and all devices connected to it.

2. Using a Phillips screwdriver, loosen the screws at the top and bottom of the blanking plate.

3. Remove the blanking plate from the slot and store it for possible future use.

4. Remove the new card from its shipping box and anti-ESD bag.

5. Holding the card by the lower handle, align the card with the plastic guide rails.

6. Slide the card into the chassis until the front of the card contacts the connector inside the chassis.

7. Press the card rmly into the slot until the

connector plate is ush with the rear panel of

the chassis and the connector is fully seated.

8. Using a Phillips screwdriver, tighten the

retaining screws at the top and bottom of the

card to secure it to the chassis.

9. Power on the machine and follow the

procedure in the user manual to congure

the new card.

10. Power on the peripheral devices.

VS- HDMI Card 34

For optimum range and performance use the recommended Kramer cables available at www.kramerav.com.

Using third-party cables may cause damage!

Safety Instructions

Caution: There are no operator serviceable parts inside the unit.

Warning: Use only the power cord that is supplied with the unit.

Warning: Do not open the unit. High voltages can cause electrical shock! Servicing by qualied personnel only.

Warning: Disconnect the power and unplug the unit from the wall before installing.

See for updated safety information www.kramerav.com

Product specificaties

Merk:	Kramer
Categorie:	Niet gecategoriseerd
Model:	DTAXRC2-OUT2-F34
Kleur van het product:	Zwart
Gewicht:	300 g
Breedte:	250 mm
Diepte:	130 mm
Hoogte:	20 mm
Gewicht verpakking:	500 g
Breedte verpakking:	293 mm
Diepte verpakking:	165 mm
Hoogte verpakking:	59 mm
Certificering:	CE, RoHs, WEEE
RS-232 port:	2
Temperatuur bij opslag:	-40 - 70 °C
RJ-45 ports hoeveelheid:	1
Stroomverbruik (typisch):	21.5 W
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent