Korg MS2000R Handleiding
Korg
Synthesizer
MS2000R
Lees hieronder de 📖 handleiding in het Nederlandse voor Korg MS2000R (83 pagina's) in de categorie Synthesizer. Deze handleiding was nuttig voor 61 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/83
2
E
ii
To ensure long, trouble-free operation, please read
this manual carefully.
Precautions
Location
Using the unit in the following locations can result in a malfunc-
tion.
• In direct sunlight
• Locations of extreme temperature or humidity
• Excessively dusty or dirty locations
• Locations of excessive vibration
Power supply
Please connect the designated AC adaptor to an AC outlet of the
correct voltage. Do not connect it to an AC outlet of voltage other
than that for which your unit is intended.
Interference with other electrical devices
This product contains a microcomputer. Radios and televisions
placed nearby may experience reception interference. Operate
this unit at a suitable distance from radios and televisions.
Handling
To avoid breakage, do not apply excessive force to the switches
or controls.
Care
If the exterior becomes dirty, wipe it with a clean, dry cloth. Do
not use liquid cleaners such as benzene or thinner, or cleaning
compounds or flammable polishes.
Keep this manual
After reading this manual, please keep it for later reference.
Keeping foreign matter out of your equipment
• Never set any container with liquid in it near this equipment.
If liquid gets into the equipment, it could cause a breakdown,
fire, or electrical shock.
• Be careful not to let metal objects get into the equipment. If
something does slip into the equipment, unplug the AC
adaptor from the wall outlet. Then contact your nearest Korg
dealer or the store where the equipment was purchased.
Data handling
Unexpected malfunctions can result in the loss of memory
contents. Please be sure to save important data on an exter-
nal data filer (storage device). Korg cannot accept any
responsibility for any loss or damage which you may incur
as a result of data loss.
THE FCC REGULATION WARNING (for U.S.A.)
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Unauthorized changes or modification to this system can void the
user’s authority to operate this equipment.
CE mark for European Harmonized Standards
CE mark which is attached to our company’s products of AC
mains operated apparatus until December 31, 1996 means it
conforms to EMC Directive (89/336/EEC) and CE mark Directive
(93/68/EEC). And, CE mark which is attached after January 1,
1997 means it conforms to EMC Directive (89/336/EEC), CE
mark Directive (93/68/EEC) and Low Voltage Directive (73/23/
EEC).
Also, CE mark which is attached to our company’s products of
Battery operated apparatus means it conforms to EMC Directive
(89/336/EEC) and CE mark Directive (93/68/EEC).
iii
Thank you for purchasing the
Korg MS2000/MS2000R analog modeling synthesizer
. To ensure
trouble-free enjoyment, please read this manual carefully and use the product correctly.
How this manual is organized
The MS2000/MS2000R owner’s manual is organized as fol-
lows.
Basic Guide
First read the Basic Guide to learn essential points of opera-
tion and basic procedures.
“Introduction” explains the features of the MS2000/
MS2000R, and how its modes and programs are organized.
“Front and rear panel”
explains the knobs and keys of the
front panel, and the input/output jacks and switches of the
rear panel.
“Connections”
explains how to connect the
MS2000/
MS2000R
to external audio devices, external MIDI devices,
computers, pedals, and pedal switches.
“Playing”
explains basics for playing the
MS2000/MS2000R
(listening to the demos, selecting sounds, using the arpeggia-
tor, etc.).
“Editing”
explains the basic procedures for editing sound
parameters and global parameters, and describes how the
main parameters are edited.
Parameter Guide
This section explains the operation of all
MS2000/MS2000R
parameters and discusses points of which you should be
aware for various settings. The explanations are organized
by page for each mode.
Refer to this section when an unfamiliar parameter appears,
or when you would like to learn more about the functions.
Appendices
This section provides explanations of MIDI-related topics
such as the MIDI messages that the
MS2000/MS2000R
can
use (control changes etc.), as well as a Voice Name List and
other information.
Printing conventions in this manual
Knobs and keys [ ]
Knobs and keys on the panel of the
MS2000/MS2000R
are
enclosed in square brackets [ ].
Parameters shown in the LCD screen “ “
Parameters that appear in the LCD screen are enclosed in
double quotation marks “ “.
Bold type
Parameter values are printed in bold type.
The names of parts of the
MS2000/MS2000R
and operating
procedures are also printed in bold type.
Procedure steps
●
●
●
●●
,
1
,
2
,
3
. . .
Steps in a procedure are printed as
●
●
●
●●
or
1
,
2
,
3
. . .
☞
p.
■
This indicates a page to which you can refer.
Symbols ,
These symbols respectively indicate points of caution and
words of advice.
Display screen
The values of parameters appearing in the display screens
printed in this manual are only explanatory examples. They
will not necessarily match the values shown in the LCD
screen of your instrument.
MIDI-related explanations
CC#
is used as an abbreviation for Control Change Number.
In MIDI-related explanations,
numbers enclosed in square
brackets [ ]
are in hexadecimal notation.
About this manual
Product specificaties
| Merk: | Korg |
| Categorie: | Synthesizer |
| Model: | MS2000R |
Heb je hulp nodig?
Als je hulp nodig hebt met Korg MS2000R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Synthesizer Korg
29 Augustus 2024
4 Mei 2024
24 Februari 2024
25 November 2023
1 Augustus 2023
1 Augustus 2023
1 Augustus 2023
1 Augustus 2023
27 Juli 2023
19 Juni 2023
Handleiding Synthesizer
- Synthesizer Casio
- Synthesizer Pioneer
- Synthesizer Yamaha
- Synthesizer AAS
- Synthesizer Arturia
- Synthesizer Behringer
- Synthesizer Boss
- Synthesizer LennarDigital
- Synthesizer Native
- Synthesizer Novation
- Synthesizer Roland
- Synthesizer Suzuki
- Synthesizer Omnitronic
- Synthesizer Elektron
- Synthesizer IK Multimedia
- Synthesizer Cre8audio
- Synthesizer Moog
- Synthesizer Make Noise
- Synthesizer Erica Synths
- Synthesizer Fred's Lab
- Synthesizer GS Music
- Synthesizer Sequential
- Synthesizer Soma
- Synthesizer Majella
- Synthesizer Dreadbox
- Synthesizer Vermona
- Synthesizer Sonicware
- Synthesizer Studiologic
- Synthesizer Modal Electronics
- Synthesizer Jomox
- Synthesizer X Audio Systems
- Synthesizer Synamodec
- Synthesizer Meebleeps Machines
- Synthesizer Kodamo
- Synthesizer Flame
- Synthesizer MFB
- Synthesizer Waldorf
- Synthesizer (Recovery)
- Synthesizer Future Retro
- Synthesizer ELTA Music
Nieuwste handleidingen voor Synthesizer
14 November 2024
2 November 2024
30 September 2024
31 Juli 2024
30 Juli 2024
30 Juli 2024
3 Juli 2024
10 Juni 2024
10 Juni 2024
10 Juni 2024