Korg MS2000BR Handleiding
Korg
Synthesizer
MS2000BR
Lees hieronder de đź“– handleiding in het Nederlandse voor Korg MS2000BR (6 pagina's) in de categorie Synthesizer. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
EasyStart CONTENTS
MS2000R Specifics 2
Listening to the Demo Songs 2
Selecting and playing Programs 2
Check out The Arpeggiator 3
Meet The Mod Sequencer 3/4
TheVocoder and The Audio Inputs 4
Virtual Patch Mode 5
Overview of the Effects 5
Tips, Tricks and Important Owner’s Manual Refrences 6
Eas
y
Start
• DSP Analog Modeling Tone Generator: 70
Waveforms, 8 types of oscillator algorithms, 4 note
polyphony, Single, Split and Dual voice modes
• 128 user-editable programs
• Over 35 Realtime Knobs and front panel keys.
• Virtual Patch function has 8 sources and 8
destinations + 4 knobs for realtime control over
synth parameters
• Built-in effects: 3 effects at once + AMP Distortion.
Chorus/Flange, Phase, Ensemble. 3 types of sync-
able Delay, 2-band EQ
•Mod Sequencing: Step or motion sequencer. 16
steps per track (3 tracks per timbre). Editable in
realtime using 16 knobs
• Arpeggiator: 6 patterns, 4 octave range,
dedicated tempo and gate knobs, programmable
Target, Key Sync, Swing and Resolution
• Vocoder: 16-band programmable vocoder with
31 editable parameters and 4 Filter Formant
settings
• 2 Audio inputs: Apply filter, LFOs, effects, etc. to
your live audio, and Vocoder
MS2000/MS2000R Main Features
MS2000/MS2000R EasyStart
2
MS2000R Specifics: The main differences between the MS2000 and MS2000R top panels are indicated in the diagram below:
Listening to the Demo Songs
1. Press the [GLOBAL] and [EXIT] keys together, and DEMO SONG 1 “Grooven Dugan” will play. Take time to listen as
the 10 short demos chain-play. (You can also manually advance through the demos by pressing the [+/YES] key)
Checking out the demos will give you a good idea of the power and versatility of the MS2000.
2. When you’re finished listening, press the [EXIT] key to return to the normal Program Play mode.
Selecting and playing Programs
The MS2000 provides an easy way to get to Program Play mode and select Programs. No matter what “state” the front panel or
display is in when you walk up to the keyboard, simply press the [EXIT] key, and you’ll go to Program Play mode. Programs are
organized into 8 banks, each containing 16 sounds. To select a Program, press one of the SELECT keys 1-16, or press the [+/YES]
or [-/NO] keys to step through the Programs. To change banks press the [BANK UP/DOWN] keys to the left of the [SELECT] keys
1-16. There are 128 RAM Programs in memory.
Note: Programs H09-14 are six varied VOCODER Programs.
Program H15 is an AUDIO INPUT Program for external audio processing.
Program H16 is an INIT (Initialized) Program for creating new Programs from “scratch”.
Selecting Programs by Category
In the MS2000 preload set of Programs, the [BANK UP/DOWN] keys can be used to move through eight related Programs for each
of the 16 SELECT keys:
! Any front panel changes you make while working with a Program put you in "instant edit mode". If you want to get back to the original
setting of a knob or switch without recalling the Program, turn the knob, or press the switch, and watch the ORIGINAL VALUE LED
1. Press SELECT key: 2. Press BANK keys for:
1 Poly Synth
2 Motion
3 Pads / Motion
4 Bass
5 Hard Synth Lead
6 Rhythmic
7 Bell / Analog Percussion
8 Keyboard
9 Bass
10 Rhythmic Motion
11 Analog Strings / Vocal /Pad
12 Synth Lead
13 Synth Brass
14 SFX Motion
15 Bass
16 Special Effects
MS2000/MS2000R EasyStart
3
(Located to the left of the LCD screen) as you edit - it will light when you reach the control’s original position. The ORIGINAL VALUE
LED is also helpful when you want to learn just how a Program was created.
Check out The Arpeggiator
1. Press [EXIT] to return to Program Play mode and select Program A01: Stab Saw.
2. Turn the Arpeggiator on by pressing the [ON/OFF] key in the ARPEGGIATOR section.
3. Play a chord on the keyboard and notice the chord holds. When the [LATCH] key is on (lit), the Arpeggiator will continue
playing after you release you hand from the keyboard. Each time you press the [LATCH] key, the setting will alternate
between on and off.
4. Press the [RANGE] key. The pitch range is displayed in the lower line of the LCD screen. Each time you press the
[RANGE] key, the pitch will change between 1-4 octaves.
5. Press the [TYPE] key. The arpeggio type is now displayed on the lower line of the LCD screen. Each time you press the
[TYPE] [EXIT] key, the arpeggio type will change. (There are six types) Press the key.
6. Play a chord and rotate the GATE knob. Rotating the knob to the right will lengthen the notes, and rotating it toward the left
will shorten them.
7. Rotate the TEMPO knob while playing a chord. Rotating the knob to the right will speed up the tempo, and rotating to the
left will slow it down. The tempo is displayed in the lower right of the LCD screen. You have officially Arpeggiated!
! For more detailed information on the Arpeggiator (Including “Key Sync,” “Resolution,” and “Swing” settings or
Synchronizing to MIDI clock) see the Owner’s Manual pages 27, 45, 54.
The Mod Sequencer: Adding motion to a sound
The Mod (Modulation) Sequencer is a step sequencer (up to 16 steps- 3 “tracks” per timbre, 6 per program) that lets you apply time-
variant change to various sound parameters in a way similar to analog synthesizers of the past. You can use the 16 knobs on the
front panel to set the value of each step or record changes in realtime (Motion Record function). Here we will briefly explore both.
1. Press [EXIT] to return to Program Play mode and select Program A01: Stab Saw.
2. Press the SEQ EDIT [SELECT] key (Located above the BANK buttons) so that the SEQ 1 LED is lit. On the lower line of
the LCD screen you will see Pitch is the parameter assigned to SEQ 1. The LCD screen shows SEQ1:Pitch
3. Press the [EDIT] key (Located under the LCD screen and PAGE keys) then rotate the first of the sixteen knobs (Located
beside the SEQ EDIT LEDs) until the LCD screen shows on the lower line Step [01]: +12 Ă„Ă„Ă„
Ă„ Press the MOD
SEQUENCE [ON/OFF] key so it is on (lit) Ă„
Ă„Ă„
Ă„ Now play and hold a note on the keyboard. Note how the first step of
sequence 1 is an octave above the note played. The light up as they step through the sequence. Oooh, SELECT keys 1-16
pretty lights! Ă„
Ă„Ă„
Ă„ While holding a note, rotate several of the other sixteen knobs and change the pitch of other steps then
rotate the TEMPO knob (Located in the ARPEGGIATOR section) to adjust the tempo.
Product specificaties
| Merk: | Korg |
| Categorie: | Synthesizer |
| Model: | MS2000BR |
Heb je hulp nodig?
Als je hulp nodig hebt met Korg MS2000BR stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Synthesizer Korg
29 Augustus 2024
4 Mei 2024
24 Februari 2024
25 November 2023
1 Augustus 2023
1 Augustus 2023
1 Augustus 2023
1 Augustus 2023
27 Juli 2023
19 Juni 2023
Handleiding Synthesizer
- Synthesizer Casio
- Synthesizer Pioneer
- Synthesizer Yamaha
- Synthesizer AAS
- Synthesizer Arturia
- Synthesizer Behringer
- Synthesizer Boss
- Synthesizer LennarDigital
- Synthesizer Native
- Synthesizer Novation
- Synthesizer Roland
- Synthesizer Suzuki
- Synthesizer Omnitronic
- Synthesizer Elektron
- Synthesizer IK Multimedia
- Synthesizer Cre8audio
- Synthesizer Moog
- Synthesizer Make Noise
- Synthesizer Erica Synths
- Synthesizer Fred's Lab
- Synthesizer GS Music
- Synthesizer Sequential
- Synthesizer Soma
- Synthesizer Majella
- Synthesizer Dreadbox
- Synthesizer Vermona
- Synthesizer Sonicware
- Synthesizer Studiologic
- Synthesizer Modal Electronics
- Synthesizer Jomox
- Synthesizer X Audio Systems
- Synthesizer Synamodec
- Synthesizer Meebleeps Machines
- Synthesizer Kodamo
- Synthesizer Flame
- Synthesizer MFB
- Synthesizer Waldorf
- Synthesizer (Recovery)
- Synthesizer Future Retro
- Synthesizer ELTA Music
Nieuwste handleidingen voor Synthesizer
14 November 2024
2 November 2024
30 September 2024
31 Juli 2024
30 Juli 2024
30 Juli 2024
3 Juli 2024
10 Juni 2024
10 Juni 2024
10 Juni 2024