Konig VID-TRANS515KN Handleiding

Konig AV extender VID-TRANS515KN

Lees hieronder de 📖 handleiding in het Nederlandse voor Konig VID-TRANS515KN (64 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/64

BEZDRÁTOVÝ AV SYSTÉM 5,8 GHZ

LANGATON 5.8 GHZ:N

AV-JÄRJESTELMÄ

SISTEMA INALÁMBRICO

AV DE 5.8GHZ

5,8 GHZ DRAADLOOS

AV-SYSTEEM

5,8 GHZ DRAHTLOSES AV-SYSTEM

SISTEM WIRELESS AV LA 5,8 GHZ

5.8GHZ TRÅDLÖST AV-SYSTEM

5,8 GHZ-ES, VEZETÉK

NÉLKÜLI AV RENDSZER

SISTEMA AV WIRELESS

DA 5.8 GHZ

ÉMETTEUR A/V SANS FIL 5,8GHZ

5.8GHZ WIRELESS AV SYSTEM

ΑΣΥΡΜΑΤΟ AV ΣΥΣΤΗΜΑ 5.8GHZ

VID-TRANS515KN

ENGLISH

Introduction:

The 2.4 GHz frequency band is very busy due to applications like Bluetooth®, WiFi and

wireless networks. Therefore the signals of such equipment are easily distorted. That is

why the VID-TRANS515KN uses the 5.8 GHz frequency, to minimize any interference

from such devices. Due to the unique design the system can be installed out of sight

on the rear of LCD TVs, DVD, etc. Retractable housing with SCART-lock connectors.

The reach is 100 m in the open field and 30 m indoor. Now you can enjoy wireless video

and audio in your house, without any problems. Includes infrared extension for control of

connected equipment with the original remote control.

Description receiver and transmitter:

1. POWER BUTTON

2. DC 7.5V INPUT

3. CONNECTION FOR IR EXTENSION CABLE

4. POWER INDICATOR, lights up red when powered ON

5. SCART CONNECTOR

6. CHANNEL SELECTOR, select same channel on transmitter and receiver

7. ANTENNA CONNECTOR, place the 5.8GHz antenna on the connector

Installation of the transmitter and receiver:

1. Plug the transmitter into the SCART output port of VCR, DVD or SAT.

2. Plug the receiver into the SCART input of the LCD screen, PLASMA screen or

television.

3. Put the plug of the power adapter into the transmitter and the receiver and in to a 230 V

wall outlet. Note: only use the provided adapters.

4. Power ON the transmitter and receiver with the power button.

5. Select the desired channel with a combination of the switches. If a channel gives some

distortion in picture and sound try another combination.

Using the remote control feature:

The system not only allows you to send audio/video from one area to another, it also gives

you the ability to control the source device using your original remote control device. It

converts the infrared (IR) signal emitted by your remote control to a radio frequency (RF)

signal in UHF band at the receiver and sends it back to the transmitter where the RF

signal is converted back to the original IR signal and beamed to the audio/video source.

Use the IR cable and connect the 2.5mm plug to the input jack on the back of the

transmitter (IR-T). Place the IR sensor on the display of the original equipment you want to

control. It’s very important you place the IR sensor as close as possible to the IR receiver

of the source device, this receiver is normally behind the display. If this function is not

working correctly check the placement of the IR sensor carefully.

VCR, DVD, SAT or other device

IR sensor in front of the display

Use the IR cable and connect the 3.5mm plug to the input jack on the back of the receiver

(IR-R). Place the IR sensor in front of the equipment. For receiving the infrared signals of

the remote control it’s important the sensor is placed in sight.

Product specificaties

Merk:	Konig
Categorie:	AV extender
Model:	VID-TRANS515KN
Gewicht:	90 g
Soort:	AV-zender & ontvanger
LED-indicatoren:	Ja
Stroom:	0.3 A
Maximum resolutie:	- Pixels
Aansluiting voor netstroomadapter:	Ja
Externe adapter:	Ja
Aantal SCART-poorten:	1
Afmetingen (B x D x H):	120 x 69 x 24 mm
Operating voltage:	7.5 V