Konig KN-WS500 Handleiding

Konig Weerstation KN-WS500

Lees hieronder de 📖 handleiding in het Nederlandse voor Konig KN-WS500 (43 pagina's) in de categorie Weerstation. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/43

KN-WS500

MANUAL (p. 2)

Weather Station

MODE D’EMPLOI (p. 8)

Station météo

MANUALE (p. 15)

Stazione Meteorologica

BRUKSANVISNING (s. 29)

Väderstation

MANUAL DE UTILIZARE (p. 35)

Staţie meteo

HASZNÁLATI ÚTMUTATÓ (o. 22.)

Időjárásjelző állomás

KÄYTTÖOHJE (s. 26)

Sääasema

GEBRUIKSAANWIJZING (p. 12)

Weerstation

ANLEITUNG (s. 5)

Wetterstation

MANUAL DE USO (p. 19)

Estación Meteorológica

NÁVOD K POUŽITÍ (s. 32)

Meteorologická stanice

ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 39)

Μετεωρολογικός Σταθμός

ENGLISH

Part I

This weather station has 7 different language options: English German, French, Italian, Spanish, Dutch

and Danish.

The weather station has 6 different buttons: CH ALERT MAX/MIN C/F 12/24 SNOOZE/LIGHT. These

buttons are used for the following functions:

1. The CH button is used to select channel 1, 2 or 3 while receiving the signal from the transmitter.

Please note that the selected channel must comply with the selected channel on the transmitter.

For example: if the transmitter is set to channel 1, the weather station needs to be set to channel 1

as well.

2. ALERT Button

* While in normal display mode, press this button to activate or deactivate the temperature alert

function. An arrow icon will appear to indicate the function has been activated, or the arrow icon will

disappear to indicate the alarm is deactivated.

* While in normal display mode, press and hold this button for 3 seconds to enter the temperature

alert settings. The indoor temperature digits will start ashing; press the DOWN button at the rear

to set the temperature (0° - 50°) at which the station has to sound an alarm.

3. MAX/MIN Button

* Press this button to display the maximum temperature and humidity of both indoors and outdoors.

* Press again to display the minimum temperature and humidity of both indoors and outdoors.

4. Set Alarm

* Press ALARM button at the back to display the alarm time.

* To set the alarm time, press ALARM time once, the alarm time displays, hold the button for

3 seconds, alarm HOUR digit ashes, use UP or DOWN to set the alarm hour.

* Press the ALARM button again, the alarm MINUTE digit ashes, use UP or DOWN to set the alarm

minutes.

5. Activate / Deactivate the Alarm Function

Under Alarm Mode , press “ALARM” button at the rear to activate or deactivate the alarm function.

Alarm bell sign will appear or disappear accordingly

6. C/F Button

Press the C/F button to switch the temperature display between C/F. Press and hold button for

3 seconds to force the unit to enter the RCC reception.

7. 12/24 Hr Button

Press 12/24-hour button to toggle between 12/24-hour formats.

8. Use Snooze

When alarm activates, press SNOOZE to stop the alarm sound, alarm will sound again after 5 minutes

9. MOON PHASE

It will calculate the moon phase automatically according to the calculator, the moon phase being

divided into 8 degrees.

Temperature and Humidity:

1. Temperature range indoors: 0ºC -50ºC (32ºF -122ºF) Temperature range outdoors: -50ºC -70ºC

(-58ºF-158ºF).

2. Range of humidity: 20%-99%.

3. Tendency of temperature change: one check per hour, compared to previous data. If the

temperature changes more than 1 ºC the arrow will be at.

RCC Reception Mode:

1. RCC reception format: DCF, the reception time is about 10 minutes.

2. RCC reception way.

3. It will begin to receive the RCC 3 minutes after turning on the unit.

4. RCC reception graphic:

The tower graphic ashes when receiving, the tower graphic will also ash when lost or no signal. The

tower graphic will not ash when synchronizing the signal, but the arc-shaped antenna symbol on top

of the tower graphic is ashing. The whole RCC reception graphic will display when the reception is

successful: The tower graphic will turn off and exit RCC when the signal reception fails.

Part II

There are 7 buttons at the rear: LIGHT CHANNEL RESET DOWN UP ALARM/SET TIME/SET. These

buttons are used for the following functions:

1. LIGHT button

* In normal display mode press this button, the LED will light up.

2. Press CH button to select between channel 1, 2, and 3 when receiving a signal from transmission.

Please note that the selected channel must comply with the channel set for transmission, e.g. if the

transmission is set to channel 1, then the station needs to be set to channel 1 as well.

3. UP Button (at the rear)

* The function for this button is the same as the 12/24 on the front; it can toggle between 12/24-hour

formats.

4. DOWN Button (at the rear)

* In normal display mode press this button to toggle between degrees Celsius or Fahrenheit.

5. Alarm/Set Button

* Press ALARM button at the rear to display the alarm time.

* To set the alarm time, press ALARM once, the alarm time displays. Press and hold the button for

3 seconds, the alarm HOUR digit ashes, use UP or DOWN to set the alarm hour.

* Press the ALARM button again, the alarm MINUTE digit ashes, use UP or DOWN to set the alarm

minutes. Then press ALARM again to nish the alarm setting.

* The alarm icon will display after nishing the alarm setting. Press ALARM/SET again to turn off the

alarm icon.

6. TIME/SET Button

* Press TIME/SET button and hold for 3 seconds when beep sounds, YEAR digit ashes. Use UP or

DOWN button at the rear to set the YEAR.

* Press TIME/SET again twice, the MONTH digit ashes, use UP or DOWN at the rear to set the

MONTH

* Press TIME/SET button again , the DATE digit ashes, use UP or DOWN at the rear to set the

DATE

Product specificaties

Merk:	Konig
Categorie:	Weerstation
Model:	KN-WS500
Kleur van het product:	Wit
Breedte:	128 mm
Diepte:	30 mm
Hoogte:	90 mm
Meeteenheid temperatuur:	°C
Alarm functie:	Ja
Klok functie:	Ja
Type batterij:	AAA