Konig CMP-WNROUT40 Handleiding

Konig Router CMP-WNROUT40

Lees hieronder de 📖 handleiding in het Nederlandse voor Konig CMP-WNROUT40 (75 pagina's) in de categorie Router. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/75
1
CMP-WNROUT20 + 40
CMP-WNROUT40
MANUAL (p. 2)
WIRELESS 11N ROUTER 150M
WLAN ROUTER 300MBPS 11N
MODE D’EMPLOI (p. 14)
ROUTEUR 150M SANS FIL 11N
ROUTEUR WLAN 300MBPS 11N
MANUALE (p. 26)
WIRELESS 11N ROUTER 150M
WLAN ROUTER 300MBPS 11N
BRUKSANVISNING (s. 51)
TRÅDLÖS 11N ROUTER 150M
WLAN ROUTER 300MBPS 11N
MANUAL DE UTILIZARE (p. 62)
ROUTER WIRELESS 11N 150M
ROUTER WLAN 300MBPS 11N
HASZNÁLATI ÚTMUTATÓ (o. 38.)
VEZETÉK NÉLKÜLI 11N ÚTVÁLASZTÓ 150M
WLAN ÚTVÁLASZTÓ 300MBPS 11N
KÄYTTÖOHJE (s. 45)
LANGATON 11N REITITIN 150M
WLAN REITITIN 300MBPS 11N
ANLEITUNG (s. 7)
KABELLOSER 11N ROUTER 150 MBIT/S
WLAN ROUTER 300 MBIT/S 11N
GEBRUIKSAANWIJZING (p. 20)
DRAADLOZE 11N ROUTER 150M
WLAN ROUTER 300MBPS 11N
MANUAL DE USO (p. 32)
ROUTER INALÁMBRICO 11N DE 150M
ROUTER WLAN 11N DE 300MBPS
NÁVOD K POUŽITÍ (s. 56)
BEZDRÁTOVÝ 11N ROUTER 150M
WLAN ROUTER 300MBPS 11N
ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 68)
ΑΣΥΡΜΑΤΟ 11N ROUTER 150M
WLAN ROUTER 300MBPS 11N
2
ENGLISH
Chapter 1: Introduction
1.1 LED Indicator and Port Description
Front Panel and LED Indicators
LED indicator description on front panel: (from L to R)
• POWER
When turns green, always ON indicates the power is connected.
• SYS
When turns green, ashing indicates the system runs well.
• WPS
When ashing, it indicates the device is communicating with client in WPS mode.
• WLAN
Wireless signal LED indicator. When turns green, ashing indicates the wireless function is enabled.
• LAN (4,3,2,1)
Wired local network LED indicator. Always ON indicates it is connected with Ethernet device; ashing indicates the
device is transmitting and/or receiving data.
• WAN
Wide area network indicator. Always ON indicates the Router’s W.
Rear Panel
Rear Panel: (From L to R)
• POWER
The jack is for power adapter connection. Please use the included 9V DC power adapter.
• WAN
A 100Mbps Ethernet port, can be connected with MODEM, switch, router and other Ethernet device for Internet
connecting to DSL MODEM, cable MODEM and ISP.
• LAN (1, 2, 3, 4)
4 10/100Mbps Ethernet ports can be connected with Ethernet switch, Ethernet router and NIC card.
• RESET
The system reset button. Press this button for 7 seconds, the settings congured in this device will be deleted and it
will restore the settings to default.
• WPS
Press for 1 second, the WPS feature will be enabled and WPS indicator will be ashing.
Chapter 2: Hardware Installation
2.1 How to Install the Router
Step 1: Please use the included power adapter to power on the Router. IMPORTANT: Use of a different power adapter
could cause damage and void the warranty for this product.
Step 2: Please connect the LAN port of the Router to the network adapter of your computer via cable.
Step 3: Please connect your broadband line provided by your ISP to the WAN port.
Step 4: Insert the included CD-ROM into the CD-ROM drive, double click the “Setup” icon and follow the instructions
to complete the installation. Or you can enter the router’s web page to configure. (More details please refer to
Chapter 3.)
3
Chapter 3: How to Login to the Router
3.1 How to Set the Network Configuration
1. On your computer desktop right click “My Network Places” and select “Properties”.
2. Right click “Local Area Network Connection” and select “Properties”.
3. Select “Internet Protocol (TCP/IP)” and click “Properties”.
4. - Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”. Click “OK” to save the
configuration.
- Or select “Use the following IP address” and enter the IP address, subnet mask, default gateway as follows: IP
Address: 192.168.0.XXX: (XXX is a number from 2~254) Subnet Mask: 255.255.255.0
Gateway: 192.168.0.1. Certainly you need to input the DNS server address provided by your ISP. Otherwise, you can
use the router’s default gateway as the DNS proxy server. Click “OK” to save the conguration.
3.2 Login to the Router
1. To access the router’s web-based interface, launch a web browser such as Internet Explorer or Firefox and enter the
router’s default IP address, http://192.168.0.1. Press “Enter”.
2. Input the “admin” in both User Name and Password. Click “OK”.
Chapter 4: Quick Setup Guide
4.1 Setup Wizard
Here is the “Welcome to Setup Wizard” for conguring your Router quickly. Click “Next”.
In this screen, select one mode of your Internet connection you use. If you are not clear, press the “Detect” button or
contact your Internet Service Provider, and click “Next”.
ADSL Virtual Dial-up (Via PPPoE)
Enter the Account and Password provided by your ISP, and click “Next”.
Dynamic IP (Via DHCP)
If your connection mode is Dynamic IP, it means your IP address keeps changing every time you connect. You do not
need to enter the information like other modes. Click “Next” and “Save” to nish the setting.
Static IP
In this screen, ll the network address information from your ISP in the IP Address, Subnet Mask, Gateway and Primary
DNS server elds and click “Next”.
L2TP
Consult your ISP for the required information.
Chapter 5: Advanced Settings
5.1 LAN Settings
LAN Settings are for the basic TCP/IP parameters of LAN ports.
• IP Address: The Router’s LAN IP addresses (not your PC’s IP address). 192.168.0.1 is the default value.
• Subnet Mask: Shows the router’s subnet mask for measurement of the network size. 255.255.255.0 is the default
value.
IMPORTANT:
Once you modify the IP address, you need to remember it for the web-based utility login next time.
5.2 WAN Settings
After you have selected the ISP connection type in “Setup Wizard” and you want to modify the related settings, here you
can modify and congure the settings in details.
Static IP
If connection mode static IP is selected, you can modify the following address information.
• IP Address: Here enter the WAN IP address provided by your ISP.
• Subnet Mask: Enter the WAN subnet mask here.
• Enter the WAN gateway here.Gateway:
• Primary DNS Server: Enter the primary DNS server provided by your ISP.
• Secondary DNS Server: Enter the secondary DNS.


Product specificaties

Merk: Konig
Categorie: Router
Model: CMP-WNROUT40

Heb je hulp nodig?

Als je hulp nodig hebt met Konig CMP-WNROUT40 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Router Konig

Handleiding Router

Nieuwste handleidingen voor Router