Konig CMP-WNROUT20 Handleiding

Konig Router CMP-WNROUT20

Lees hieronder de 📖 handleiding in het Nederlandse voor Konig CMP-WNROUT20 (75 pagina's) in de categorie Router. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/75

CMP-WNROUT20 + 40

CMP-WNROUT40

MANUAL (p. 2)

WIRELESS 11N ROUTER 150M

WLAN ROUTER 300MBPS 11N

MODE D’EMPLOI (p. 14)

ROUTEUR 150M SANS FIL 11N

ROUTEUR WLAN 300MBPS 11N

MANUALE (p. 26)

WIRELESS 11N ROUTER 150M

WLAN ROUTER 300MBPS 11N

BRUKSANVISNING (s. 51)

TRÅDLÖS 11N ROUTER 150M

WLAN ROUTER 300MBPS 11N

MANUAL DE UTILIZARE (p. 62)

ROUTER WIRELESS 11N 150M

ROUTER WLAN 300MBPS 11N

HASZNÁLATI ÚTMUTATÓ (o. 38.)

VEZETÉK NÉLKÜLI 11N ÚTVÁLASZTÓ 150M

WLAN ÚTVÁLASZTÓ 300MBPS 11N

KÄYTTÖOHJE (s. 45)

LANGATON 11N REITITIN 150M

WLAN REITITIN 300MBPS 11N

ANLEITUNG (s. 7)

KABELLOSER 11N ROUTER 150 MBIT/S

WLAN ROUTER 300 MBIT/S 11N

GEBRUIKSAANWIJZING (p. 20)

DRAADLOZE 11N ROUTER 150M

WLAN ROUTER 300MBPS 11N

MANUAL DE USO (p. 32)

ROUTER INALÁMBRICO 11N DE 150M

ROUTER WLAN 11N DE 300MBPS

NÁVOD K POUŽITÍ (s. 56)

BEZDRÁTOVÝ 11N ROUTER 150M

WLAN ROUTER 300MBPS 11N

ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 68)

ΑΣΥΡΜΑΤΟ 11N ROUTER 150M

WLAN ROUTER 300MBPS 11N

ENGLISH

Chapter 1: Introduction

1.1 LED Indicator and Port Description

Front Panel and LED Indicators

LED indicator description on front panel: (from L to R)

• POWER

When turns green, always ON indicates the power is connected.

• SYS

When turns green, ashing indicates the system runs well.

• WPS

When ashing, it indicates the device is communicating with client in WPS mode.

• WLAN

Wireless signal LED indicator. When turns green, ashing indicates the wireless function is enabled.

• LAN (4,3,2,1)

Wired local network LED indicator. Always ON indicates it is connected with Ethernet device; ashing indicates the

device is transmitting and/or receiving data.

• WAN

Wide area network indicator. Always ON indicates the Router’s W.

Rear Panel

Rear Panel: (From L to R)

• POWER

The jack is for power adapter connection. Please use the included 9V DC power adapter.

• WAN

A 100Mbps Ethernet port, can be connected with MODEM, switch, router and other Ethernet device for Internet

connecting to DSL MODEM, cable MODEM and ISP.

• LAN (1, 2, 3, 4)

4 10/100Mbps Ethernet ports can be connected with Ethernet switch, Ethernet router and NIC card.

• RESET

The system reset button. Press this button for 7 seconds, the settings congured in this device will be deleted and it

will restore the settings to default.

• WPS

Press for 1 second, the WPS feature will be enabled and WPS indicator will be ashing.

Chapter 2: Hardware Installation

2.1 How to Install the Router

Step 1: Please use the included power adapter to power on the Router. IMPORTANT: Use of a different power adapter

could cause damage and void the warranty for this product.

Step 2: Please connect the LAN port of the Router to the network adapter of your computer via cable.

Step 3: Please connect your broadband line provided by your ISP to the WAN port.

Step 4: Insert the included CD-ROM into the CD-ROM drive, double click the “Setup” icon and follow the instructions

to complete the installation. Or you can enter the router’s web page to configure. (More details please refer to

Chapter 3.)

Chapter 3: How to Login to the Router

3.1 How to Set the Network Configuration

1. On your computer desktop right click “My Network Places” and select “Properties”.

2. Right click “Local Area Network Connection” and select “Properties”.

3. Select “Internet Protocol (TCP/IP)” and click “Properties”.

4. - Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”. Click “OK” to save the

configuration.

- Or select “Use the following IP address” and enter the IP address, subnet mask, default gateway as follows: IP

Address: 192.168.0.XXX: (XXX is a number from 2~254) Subnet Mask: 255.255.255.0

Gateway: 192.168.0.1. Certainly you need to input the DNS server address provided by your ISP. Otherwise, you can

use the router’s default gateway as the DNS proxy server. Click “OK” to save the conguration.

3.2 Login to the Router

1. To access the router’s web-based interface, launch a web browser such as Internet Explorer or Firefox and enter the

router’s default IP address, http://192.168.0.1. Press “Enter”.

2. Input the “admin” in both User Name and Password. Click “OK”.

Chapter 4: Quick Setup Guide

4.1 Setup Wizard

Here is the “Welcome to Setup Wizard” for conguring your Router quickly. Click “Next”.

In this screen, select one mode of your Internet connection you use. If you are not clear, press the “Detect” button or

contact your Internet Service Provider, and click “Next”.

ADSL Virtual Dial-up (Via PPPoE)

Enter the Account and Password provided by your ISP, and click “Next”.

Dynamic IP (Via DHCP)

If your connection mode is Dynamic IP, it means your IP address keeps changing every time you connect. You do not

need to enter the information like other modes. Click “Next” and “Save” to nish the setting.

Static IP

In this screen, ll the network address information from your ISP in the IP Address, Subnet Mask, Gateway and Primary

DNS server elds and click “Next”.

L2TP

Consult your ISP for the required information.

Chapter 5: Advanced Settings

5.1 LAN Settings

LAN Settings are for the basic TCP/IP parameters of LAN ports.

• IP Address: The Router’s LAN IP addresses (not your PC’s IP address). 192.168.0.1 is the default value.

• Subnet Mask: Shows the router’s subnet mask for measurement of the network size. 255.255.255.0 is the default

value.

IMPORTANT:

Once you modify the IP address, you need to remember it for the web-based utility login next time.

5.2 WAN Settings

After you have selected the ISP connection type in “Setup Wizard” and you want to modify the related settings, here you

can modify and congure the settings in details.

Static IP

If connection mode static IP is selected, you can modify the following address information.

• IP Address: Here enter the WAN IP address provided by your ISP.

• Subnet Mask: Enter the WAN subnet mask here.

• Enter the WAN gateway here.Gateway:

• Primary DNS Server: Enter the primary DNS server provided by your ISP.

• Secondary DNS Server: Enter the secondary DNS.

Product specificaties

Merk:	Konig
Categorie:	Router
Model:	CMP-WNROUT20
Kleur van het product:	Wit
Gewicht:	- g
Ethernet LAN:	Nee
Aantal Ethernet LAN (RJ-45)-poorten:	4
Aansluiting voor netstroomadapter:	Ja
Interfacetype Ethernet LAN:	Fast Ethernet
Ethernet LAN, data-overdrachtsnelheden:	10,100 Mbit/s
Netwerkstandaard:	IEEE 802.11b,IEEE 802.11g,IEEE 802.11n
Ondersteunde beveiligingsalgoritmen:	128-bit WEP,64-bit WEP,WPA,WPA2
Ethernet WAN:	Ja
Afmetingen (B x D x H):	- mm