Konig Electronic CMP-PCIE2USB3 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Konig Electronic CMP-PCIE2USB3 (57 pagina's) in de categorie Diversen - Overig. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/57
1
CMP-PCIE2USB3
MANUAL (p. 2)
PCI Express Card USB 3.0
MODE D’EMPLOI (p. 12)
Carte PCI Express USB 3.0
MANUALE (p. 22)
Express Card PCI USB3.0
NÁVOD K POUŽITÍ (s. 41)
PCI Express karta USB 3.0
ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 52)
Κάρτα PCI Express USB3.0
HASZNÁLATI ÚTMUTATÓ (o. 32.)
PCI Express kártya USB3.0
KÄYTTÖOHJE (s. 37)
PCI Express-kortti USB3.0
ANLEITUNG (s. 7)
PCI Express-Karte USB3.0
GEBRUIKSAANWIJZING (p. 17)
PCI Express Kaart USB 3.0
MANUAL DE USO (p. 27)
Tarjeta PCI Express USB3.0
MANUAL DE UTILIZARE (p. 47)
Placă USB3.0 PCI Express
2
ENGLISH
Introduction
• Features
• System requirements
• Installing the hardware device
• Installing the software driver
• Connections
• Performance
• Package contents
• Disclaimer
Introduction:
The new USB 3.0 standard is 10 times faster then USB 2.0. This PCI express card enables you to use this speed to
the fullest. It’s backwards compatible with USB 2.0 (480 Mbps) and USB 1.1 (1.5 Mbps) so you can still use your old
hardware. Move large les quickly from and to external storage devices such as HDDs, digital cameras and other USB
devices.
Features:
• 2x Super-Speed USB3.0 (5Gbps) connections.
• NEC UPD720200 chipset.
• Compliant with PCI Express Base Specications 2.0.
• Compliant with xHCI (eXtensible Host Controller Interface) specications Revision 0.95.
• Backwards compatible with USB2.0 High-Speed (480Mbps), USB1.1 Low-Speed (1.5Mbps).
• Bus interface: PCI-Express.
• 4-pin power connection for power supply from system.
• Supports Plug-n-Play and hot-swapping function.
• Each USB port supplies maximum +5V / 900mA power output to USB device.
• Supports simultaneous operation of multiple USB 3.0, USB 2.0 and USB 1.1 devices.
• Compatible with Windows XP/Vista/7 (32-bit and 64-bit).
System Requirements:
AMD or Intel Pentium 1.5GHz or better based computer
• Windows® XP / Vista or 7 operating system
• 1 GB DDR Ram or above.
• Free PCI-Express slot with x1, x4, x8 or x16.
• CD/DVD-Rom drive
Installing the hardware device:
• Turn your computer off, remove the power connection and the cover from the computer case.
• Remove the metal cover plate on the rear of a PCI-Express card slot.
• Insert the card into the PCI-Express slot and x it on the brackets side.
• Connect the internal power on the 4-pin of the PCI-Expres USB3.0 card.
• Place back the cover of the computer case and turn on the computer.
3
Installing the software driver:
1. Please insert the CD into your CD/DVD-ROM drive and click the PCI-E folder.
2. Please click the “Setup” icon to start the installation.


Product specificaties

Merk: Konig Electronic
Categorie: Diversen - Overig
Model: CMP-PCIE2USB3

Heb je hulp nodig?

Als je hulp nodig hebt met Konig Electronic CMP-PCIE2USB3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Diversen - Overig Konig Electronic

Handleiding Diversen - Overig

Nieuwste handleidingen voor Diversen - Overig