Kodak Ngenuity 9150DC Handleiding

Kodak Scanner Ngenuity 9150DC

Lees hieronder de 📖 handleiding in het Nederlandse voor Kodak Ngenuity 9150DC (98 pagina's) in de categorie Scanner. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/98

Safety

User Precautions

• Place the scanner on a sturdy, level work surface capable of supporting 50.8 kg (112 lbs) and leave adequate clearance on

all sides of the scanner.

• When relocating the scanner, it is recommended that two people lift the scanner and use safe lifting techniques.

• Do not install the scanner in a location subject to dust, humidity or steam. This may cause electrical shock or a fire. Only use

the scanner indoors in a dry location.

• Make sure the electrical power outlet is located within 1.52 meters (5 feet) of the scanner and is easily accessible.

• When disconnecting equipment from the electric socket, be sure to grasp the plug, not the cord.

• Be sure the power cord is securely plugged into the wall outlet. Failure to do so may cause electrical shock or fire.

• Do not damage, knot, cut or modify the power cord or use a damaged power cord. This may cause electrical shock or fire.

• The scanner requires a dedicated and properly grounded power outlet. Do not use an extension cord or power strip with the

scanner.

• Do not leave the power cord plugged into the AC outlet if the scanner is not used for an extended period of time.

• Leave sufficient space around the power outlet so it can be easily unplugged in case of an emergency.

• Do not use the scanner if it becomes inordinately hot, has a strange odor, emits smoke, or makes unfamiliar noises.

Immediately stop the scanner and disconnect the power cord from the power outlet. Contact Kodak Service.

• Do not disassemble, service or modify the scanner except as explained in the User’s Guide.

• Do not move the scanner with the power cord and interface cable attached. This may cause damage to the cord/cable.

Remove the power cord from the wall outlet before moving or relocating the scanner.

• Follow the Kodak recommended cleaning procedures. Do not use air, liquid or gas spray cleaners. These cleaners displace

dust, dirt and debris to other locations within the scanner, which may cause the scanner to malfunction.

• Material Safety Data Sheets (MSDS) for chemical products are available on the Kodak website at: www.kodak.com/go/msds.

When accessing the MSDSs from the website, you will be required to provide the catalog number or keyword of the

consumable you want the Material Safety Data Sheet for. See the section entitled, “Supplies and consumables” later in this

guide for supplies and catalog numbers.

Users and their employers need to observe the common sense precautions applicable to the operation of any machinery. These

include, but are not limited to, the following:

• Do not wear loose clothing, unbuttoned sleeves, neckties, etc.

• Do not wear loose jewelry, bracelets, bulky rings, long necklaces, etc.

• Hair length should be kept short, using a hair net if needed, or tying long hair up in a bundle.

• Remove all other loose objects from the area that could be drawn into the machine.

• Take sufficient breaks to maintain mental alertness.

• Use only the recommended cleaning supplies.

• Do not use canned/compressed air.

Supervisors should review their employee practices and make compliance with these precautions a part of the job description

for operation of the scanner or any mechanical device.

Environmental information

• The Kodak Ngenutiy Scanners are designed to meet worldwide environmental requirements.

• Disposal of this equipment may be regulated due to environmental considerations. For disposal or recycling information,

contact your local authorities or, in the USA, visit: www.kodak.com/go/scannerrecycle.

• The product packaging is recyclable.

• Kodak Ngenutiy Scanners are Energy Star compliant and shipped from the factory with the default time set to 15 minutes.

European Union

This symbol indicates that when the last user wishes to discard this product, it must be sent to appropriate

facilities for recovery and recycling. Please contact your local Kodak representative or refer to:

www.kodak.com/go/scannerrecycle for additional information on the collection and recovery programs available

for this product.

Please consult www.kodak.com/go/REACH for information about the presence of substances included on the candidate list

according to article 59(1) of Regulation (EC) No. 1907/2006 (REACH).

Acoustic emission

Maschinenlärminformationsverordnung – 3, GSGV

Der arbeitsplatzbezogene Emissionswert beträgt <70 dB(A).

[Machine Noise Information Ordinance — 3, GSGV

The operator-position noise emission value is <70 dB(A).]

EMC statements

United States

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC

rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated

in a commercial environment. This equipment generates, uses, and can radiate radio frequently energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the

interference at their own expense.

Japan

This is a Class A product based on the standard of the Voluntary Control Council for interference by information Technology

Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble

occurs, the user may be required to take corrective action.

Taiwan

WARNING: This is a Class A product. In a domestic environment this product may cause radio interference in which case the

user may be required to take adequate measures.

Product specificaties

Merk:	Kodak
Categorie:	Scanner
Model:	Ngenuity 9150DC
Kleur van het product:	Wit
Ingebouwd display:	Nee
Gewicht:	50800 g
Breedte:	521 mm
Diepte:	762 mm
Hoogte:	495 mm
USB-poort:	Ja
Meegeleverde kabels:	AC, USB
Stroomverbruik (in standby):	60 W
USB-versie:	2.0
Type beeldsensor:	CCD
Ingangsspanning:	100-240 V
Meegeleverde software:	Kofax VCDemo, Kofax Scan Demo, Kofax VRS Professional
Ondersteunt Windows:	Ja
Soort voeding:	AC
Standaard interfaces:	SCSI-3, USB 2.0
Soort scanner:	ADF-scanner
Optische scanresolutie:	600 x 600 DPI
Maximale ISO A-series papierformaat:	A4
Duplex scannen:	Ja
Capaciteit automatische documentinvoer:	700 vel
Maximum scanformaat:	318 x 1016 mm
Scanner-drivers:	ISIS, TWAIN
ADF scan snelheid (b/w, A4):	120 ppm
Kleurenscans:	Ja
Film-scannen:	Nee
Duplex ADF scan snelheid (b/w, A4):	240 ipm
Zwart / wit scannen kleurenmodi:	Grijstinten
Dagelijkse diensten cyclus (max):	150000 pagina's
Ondersteunde scanning media types:	Normaal papier
Letter:	Ja
AC-ingangsfrequentie:	50 - 60 Hz
Stroomverbruik (typisch):	175 W
Bedrijfstemperatuur (T-T):	10 - 38 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 80 procent
Lichtbron:	Witte led
Duplex ADF scan snelheid (kleur, A4):	240 ipm
Detectie meervoudige invoer:	Ja
ADF scan snelheid (colour, A4):	120 ppm
Media dikheid (min):	0.038 mm