Kodak Ngenuity 9090DB Handleiding

Kodak Scanners Ngenuity 9090DB

Lees hieronder de 📖 handleiding in het Nederlandse voor Kodak Ngenuity 9090DB (98 pagina's) in de categorie Scanners. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/98

OVERVIEW 1-1

INSTALLATION 2-1

GETTING STARTED 3-1

CONTROL PANEL AND NGENUITY OPERATOR UTILITY 4-1

ADVANCED FEATURES 5-1

MAINTENANCE 6-1

TROUBLESHOOTING 7-1

APPENDICES A-E

Safety

User Precautions

• Place the scanner on a sturdy, level work surface capable of supporting 50.8 kg (112 lbs) and leave adequate clearance on

all sides of the scanner.

• When relocating the scanner, it is recommended that two people lift the scanner and use safe lifting techniques.

• Do not install the scanner in a location subject to dust, humidity or steam. This may cause electrical shock or a fire. Only use

the scanner indoors in a dry location.

• Make sure the electrical power outlet is located within 1.52 meters (5 feet) of the scanner and is easily accessible.

• When disconnecting equipment from the electric socket, be sure to grasp the plug, not the cord.

• Be sure the power cord is securely plugged into the wall outlet. Failure to do so may cause electrical shock or fire.

• Do not damage, knot, cut or modify the power cord or use a damaged power cord. This may cause electrical shock or fire.

• The scanner requires a dedicated and properly grounded power outlet. Do not use an extension cord or power strip with the

scanner.

• Do not leave the power cord plugged into the AC outlet if the scanner is not used for an extended period of time.

• Leave sufficient space around the power outlet so it can be easily unplugged in case of an emergency.

• Do not use the scanner if it becomes inordinately hot, has a strange odor, emits smoke, or makes unfamiliar noises.

Immediately stop the scanner and disconnect the power cord from the power outlet. Contact Kodak Service.

• Do not disassemble, service or modify the scanner except as explained in the User’s Guide.

• Do not move the scanner with the power cord and interface cable attached. This may cause damage to the cord/cable.

Remove the power cord from the wall outlet before moving or relocating the scanner.

• Follow the Kodak recommended cleaning procedures. Do not use air, liquid or gas spray cleaners. These cleaners displace

dust, dirt and debris to other locations within the scanner, which may cause the scanner to malfunction.

• Material Safety Data Sheets (MSDS) for chemical products are available on the Kodak website at: www.kodak.com/go/msds.

When accessing the MSDSs from the website, you will be required to provide the catalog number or keyword of the

consumable you want the Material Safety Data Sheet for. See the section entitled, “Supplies and consumables” later in this

guide for supplies and catalog numbers.

Users and their employers need to observe the common sense precautions applicable to the operation of any machinery. These

include, but are not limited to, the following:

• Do not wear loose clothing, unbuttoned sleeves, neckties, etc.

• Do not wear loose jewelry, bracelets, bulky rings, long necklaces, etc.

• Hair length should be kept short, using a hair net if needed, or tying long hair up in a bundle.

• Remove all other loose objects from the area that could be drawn into the machine.

• Take sufficient breaks to maintain mental alertness.

• Use only the recommended cleaning supplies.

• Do not use canned/compressed air.

Supervisors should review their employee practices and make compliance with these precautions a part of the job description

for operation of the scanner or any mechanical device.

Product specificaties

Merk:	Kodak
Categorie:	Scanners
Model:	Ngenuity 9090DB
Kleur van het product:	Wit
Ingebouwd display:	Nee
Gewicht:	50800 g
Breedte:	521 mm
Diepte:	762 mm
Hoogte:	495 mm
USB-poort:	Ja
Meegeleverde kabels:	AC, USB
Snelstartgids:	Ja
Stroomverbruik (in standby):	60 W
Stroomverbruik (indien uit):	6.7 W
USB-versie:	3.2 Gen 1 (3.1 Gen 1)
Type beeldsensor:	CCD
Ingangsspanning:	100-240 V
Stroomverbruik (PowerSave):	175 W
Soort voeding:	AC
Bedrijfstemperatuur, bereik:	50 - 100 °F
Standaard interfaces:	USB 2.0, USB 3.2 Gen 1 (3.1 Gen 1)
Soort scanner:	ADF-scanner
Optische scanresolutie:	600 x 600 DPI
Maximale ISO A-series papierformaat:	A4
Duplex scannen:	Ja
Meegeleverde drivers:	Ja
Capaciteit automatische documentinvoer:	700 vel
Maximum scanformaat:	318 x 200000 mm
Scanner-drivers:	ISIS, TWAIN
ADF scan snelheid (b/w, A4):	70 ppm
Kleurenscans:	Ja
Film-scannen:	Nee
Dagelijkse diensten cyclus (max):	90000 pagina's
Ondersteunde scanning media types:	Plain paper, Thick paper, Thin paper
Letter:	Ja
Mediagewicht, automatische doorvoer:	30 - 1200 g/m²
AC-ingangsfrequentie:	50 - 60 Hz
Stroomverbruik (typisch):	175 W
Bedrijfstemperatuur (T-T):	10 - 38 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 80 procent
Scanformaat documentinvoer (min):	43 x 64 mm
Maximum scanformaat (documentinvoer):	318 x 1016 mm
Lichtbron:	Witte led
ADF scan snelheid (colour, A4):	70 ppm
Media dikheid (min):	0.038 mm
PC verbinding:	USB 2.0