Klipsch Klipsch AW-500-SM Handleiding

Klipsch Luidspreker Klipsch AW-500-SM

Lees hieronder de 📖 handleiding in het Nederlandse voor Klipsch Klipsch AW-500-SM (5 pagina's) in de categorie Luidspreker. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

REFERENCE ALL WEATHER

OUTDOOR SPEAKER

OWNER'S MANUAL

OUTDOOR SPEAKERS

IMPORTANT SAFETY INSTRUCTIONS

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Install in accordance with the manufacturer's

instructions.

8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and a

third grounding prong. The wider blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult an electrician for replacement of the

obsolete outlet.

10. PROTECT the power cord from being walked on or pinched, particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. ONLY USE attachments/accessories specified by the manufacturer.

12. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold

with the apparatus. When a cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.

14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

This symbol indicates that there are important operating and maintenance instructions

in the literature accompanying this unit.

This symbol indicates that dangerous voltage constituting a risk of electric shock is

present within this unit.

WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or

moisture.

WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside.

Refer all servicing to qualified service personnel.

CAUTION: Changes or modifications not expressly approved by the manufacturer could void the

user’s authority to operate this device.

ABOUT YOUR KLIPSCH PURCHASE

Thank you for your purchase of Klipsch outdoor loudspeakers. After reading this manual and

connecting your system, you will hear the result of over 55 years of stringent engineering and

class-leading research and development. Like all Klipsch products, your outdoor loudspeakers

feature Klipsch Tractrix

Horn-loaded Technology—the guiding design for the first Klipschorn

developed in 1946 and for every product that has followed. Horn-loading allows your speakers

to deliver high sensitivity, low distortion, flat frequency response and wide dispersion, which

translates to unequaled power, detail and dynamics, the hallmarks of “The Klipsch Sound.”

Please be sure to fill out the warranty card at the back of this manual or online at

www.klipsch.com so we are better able to serve you. Again, thank you for choosing Klipsch

and we hope that your speakers bring life to your music for many years.

KLIPSCH REFERENCE ALL-WEATHER LOUDSPEAKERS

(AW-400, AW-500, AW-525, AW-650, AW-500-SM models)

The Klipsch Reference All-Weather loudspeakers are two-way designs using a high

performance bass driver for the low frequencies. A Tractrix Horn with a 90˚ x 90˚ coverage

pattern attached to a 1” diameter compression driver for clean and efficient reproduction of

the high and midrange frequencies.

(AW-800-SW)

The AW-800-SW is an innovative approach that delivers low frequency sound in outdoor

applications. This subwoofer has been designed to complement any of the Reference All-

Weather two-way speakers and deliver strong bass response in a variety of applications. It

incorporates both a low-pass crossover as well as a high-pass crossover. This ensures a

seamless blend between the subwoofer and the models used for high-frequency reproduc-

tion and allows for simple wiring configurations.

Klipsch Reference All-Weather loudspeakers are constructed from UV-resistant, glass-rein-

forced polypropylene and are remarkably durable against the elements. They can be paint-

ed to match any trim or siding color.

PLACEMENT

The Reference All-Weather models are perfect for patios, decks, swimming pools, porches

or any other place where exposure to the elements makes conventional loudspeaker usage

unsuitable.

(AW-400, AW-500, AW-525, AW-650, AW-500-SM models)

To achieve the best performance from your speakers, place the pair on the same wall

facing the listening area and space them six to fifteen feet apart. In the case of the

AW-500-SM, only one of these may be used in some installations. It is best to center the

speaker on the listening area in these cases. When two are used, follow the same place-

ment guidelines for the other models. For a higher quality stereo image, angle down, or toe

in, the speakers toward the primary listening area. This is especially important in

installations that place the speakers well above ear level. Some additional bass will result if

you place the speakers in a corner or near a wall. This provides greater bass coupling due

to the additional reflected energy from the walls.

(AW-800-SW)

The AW-800-SW can be installed in a large variety of locations due to bass frequencies

being less directional than high frequencies. You will achieve better results if it is installed

in a corner or near a wall where additional energy can be reflected from the walls.

WALL MOUNTING

Included with your speakers are "C" style mounting brackets constructed of weather-

resistant, powder-coated zinc. These brackets attach to the speaker with the supplied low

profile knobs that thread onto the top and bottom studs protruding from the cabinet. This

allows the speaker to be angled to the left or right when mounted vertically, or up and

down when mounted horizontally.

After determining the desired location and orientation of your speakers, remove the bracket

from the loudspeaker and use it as a template to mark the location of the mounting holes.

Check the alignment of the holes with a torpedo level before drilling the pilot hole. Use

#10-12 2.5” –3” long pan head screws to attach the bracket into a wall stud. Affix the

speaker to the bracket with the supplied knobs. Be sure to leave enough clearance

between the end of the bracket and any adjacent wall or ceiling for installation of

the knobs.

If a wall stud is not available, use the appropriate type of drywall or masonry anchor to

support the weight of the speaker, allowing for a generous safety margin. Please consult

your dealer, custom installer or building contractor in these situations.

(AW-500-SM model)

The AW-500-SM can operate in two modes. When using one speaker, flip the switch to the

“Stereo” position and connect the “Front” or “Main” left and right channels of your system’s

power amplifier to both inputs (See Figure 2A). When using more than one AW-500-SM,

flip the switch to the “Mono” position and connect either output of your system’s power

amplifier to either input cup (See Figure 2B).

(AW-800-SW)

The AW-800-SW can operate in two modes. If the amplifier you are using is mono, flip the

switch to the left and connect the output of your system’s amplifier to either of the two

input connectors (See Figure 3A). For stereo use, flip the switch to the right and connect

the output of your system’s amplifier to both input connectors (See Figure 3B).

You may also use an optional wall or ceiling mount that will fit the provided 3/8” – 16 inserts.

Please see your authorized Klipsch dealer to see which model is right for you.

CONNECTIONS

Note: Proper connection of your speakers to your amplifier or receiver is vital to obtaining good

sound quality. Please follow these directions carefully. Sloppy connections can cause amplifier

malfunction or damage. We recommend that you use 16-gauge or heavier stranded copper wire.

Use a lower gauge (heavier) wire for longer runs to reduce the amount of amplifier power lost due

to the wire’s resistance.

BUT FIRST: TYPES OF CONNECTORS

Bare wire. Pull the two conductors apart for about an inch and strip approximately 1/4-inch of

insulation from the end of each. (A wire stripper will simplify this, but you can use an ordinary

pocket knife to cut around and through the insulation down to the wire.) Twist the strands of wire

on each individual conductor tightly together. Loosen the nuts on a pair of binding posts until the

holes through the metal posts are exposed, then insert the bare wire through the holes. Screw the

nuts down finger-tight on the wire. Make sure that no strands of wire are touching from one bind-

ing post to the other or to any strands from the other conductor. Failure to observe this precaution

at either end of the connection can result in amplifier malfunction or damage.

Pins. Many pre-made speaker cables are terminated with metal pins. Loosen the nuts on a pair of

binding posts until the holes through the metal posts are exposed, then insert the pins through the

holes. Screw the nuts down finger-tight on the pins — do not overtighten. Make sure that there is

no metal-to-metal contact between the two pins or binding posts. Failure to observe this precau-

tion at either end of the connection can result in amplifier malfunction or damage.

Spade lugs. Some speaker cables are terminated with U-shaped connectors called spade lugs. Loosen

the nuts on a pair of binding posts and slip the spade lugs around the metal posts. Screw the nuts

down finger-tight on the lugs and inspect to ensure they have remained firmly in place. Make sure that

there is no metal-to-metal contact between the two lugs or binding posts. Failure to observe this pre-

caution at either end of the connection can result in amplifier malfunction or damage.

OTHER TYPES OF SPECIALTY CONNECTORS ARE AVAILABLE TO FACILITATE HOOKING UP YOUR SPEAKERS.

PLEASE CONSULT YOUR AUTHORIZED KLIPSCH DEALER FOR SUGGESTIONS AND FURTHER DETAILS.

SPEAKERS TO AMPLIFIER: KEEPING IT STRAIGHT

(AW-400, AW-500, AW-525, AW-650 models)

One of the most important things about hooking up your speakers is keeping them in the same

polarity, or phase. If they are connected out of phase, bass and sound imaging will be degraded.

The easiest way to ensure that your speakers are wired in phase is to always connect the positive

and negative output terminals on your amplifier or receiver to the matching input terminals on your

speakers: positive (“+”, color-coded red) to positive and negative (“–”, color-coded black) to

negative. (See Figure 1.)

Figure 3

Figure 2

Figure 1

Product specificaties

Merk:	Klipsch
Categorie:	Luidspreker
Model:	Klipsch AW-500-SM

Heb je hulp nodig?

Als je hulp nodig hebt met Klipsch Klipsch AW-500-SM stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Luidspreker Klipsch

Klipsch COMM SAT SPEAKER SYSTEM Handleiding

5 September 2023

Klipsch B-10 Handleiding

5 September 2023

Klipsch KPT-1260-H Handleiding

5 September 2023

Klipsch Klipsch AW-500-SM Handleiding

5 September 2023

Klipsch P-17B Handleiding

5 September 2023

Klipsch Klipsch R-2650-C Handleiding

5 September 2023

Klipsch KSP 300 Handleiding

5 September 2023

Klipsch P-38F Handleiding

5 September 2023

Klipsch KSP 400 Handleiding

5 September 2023

Klipsch R-5800-W II Luidspreker Handleiding

28 December 2022

Handleiding Luidspreker

Nieuwste handleidingen voor Luidspreker

JBL AS5 Handleiding

2 November 2024

Envivo ENV-1690 Handleiding

21 December 2023

JBL 4367 Handleiding

25 Oktober 2023

JBL B-8IC Handleiding

25 Oktober 2023

JBL B-6ICDT Handleiding

25 Oktober 2023

Tannoy turnberry he Handleiding

15 Oktober 2023

Omnitronic PAS-212 Handleiding

9 Oktober 2023

KEF c5 Handleiding

8 Oktober 2023

KEF C1 Handleiding

8 Oktober 2023

KEF KIT 160 Handleiding

8 Oktober 2023