Klipsch P-38F Handleiding

Klipsch Luidspreker P-38F

Lees hieronder de 📖 handleiding in het Nederlandse voor Klipsch P-38F (11 pagina's) in de categorie Luidspreker. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/11

Palladium®

Owner’s Manual

P-38F

P-37F

P-17B

P-27C

P-27S

Page 2 Page 3

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. DO NOT install near any heat sources such as ra-

diators, heat registers, stoves, or other apparatus

(including ampliers) that produce heat.

9. ONLY USE attachments/accessories specied by

the manufacturer.

10. USE only with a cart, stand, tripod, bracket, or

table specied by the manufacturer, or

sold with the apparatus. When a cart

is used, use caution when moving the

cart/apparatus combination to avoid

injury from tip-over.

11. UNPLUG this apparatus during lightning storms

or when unused for long periods of time.

12. REFER all servicing to qualied service person-

nel. Servicing is required when the apparatus

has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or

moisture, does not operate normally, or has

been dropped.

Important Safety Instructions

General Cautions

This symbol indicates that there are

important operating and maintenance

instructions in the literature accompany-

ing this unit.

This symbol indicates that dangerous

voltage constituting a risk of electric

shock is present within this unit.

WARNING: To reduce the risk of re or

electrical shock, do not expose this ap-

paratus to rain or moisture.

WARNING: Voltages in this equipment are hazard-

ous to life.

No user-serviceable parts inside. Refer all servicing to

qualied service personnel.

CAUTION: Changes or modications not expressly

approved by the manufacturer could void the user’s

authority to operate.

CAUTION!

Risk of electRic shock

do not open

• When making or changing any connections to

your system, switch all the electronics OFF.

• Do NOT listen to music for long periods at

extreme volume settings. Doing so can perma-

nently damage your hearing.

• When running loudspeaker cables, do not trail

them over open oor spaces where they could

cause an accident. Cover them or route them

around potential troublespots.

• Before switching on your sound system, turn

the volume level down. After switching the

system on, turn the level up gradually.

• Do not use extreme settings of Treble, Bass or

EQ. Ideally set the tone controls “at” and turn

any EQ o.

• These loudspeakers are extremely heavy. Do not

move them by yourself. Always get help.

If you are using the oor spikes:

• Spikes are sharp! Exercise extreme caution when

using spikes.

• Do not drag the loudspeaker. Lift the speakers

o the oor and set them down carefully when

changing their location.

• Be especially careful not to place a spiked

loudspeaker in areas where there may be hidden

obstacles that could get damaged.

• Some oor surfaces can be damaged by spikes.

If you are unsure, consult your ooring contrac-

tor for advice before using spikes, or use the

spike seats.

Introduction

For over 60 years, our engineers have sought the ultimate: a loudspeaker that could reproduce recorded music

with all the passion of a live performance. The Palladium™ Series approaches aural perfection, while making a

visual statement that is every bit as elegant and passionate as the sound.

The Palladium Series represents the epitome of loudspeaker technology, with remarkable clarity throughout

the dynamic range and bold styling. Today, Klipsch Group, Inc. is a global force, and this loudspeaker range

reects that leadership status; design and engineering teams from the United States collaborated with col-

leagues from Germany and China to plan and execute the Palladium project.

In designing the Palladium cabinetry, we rst considered the Klipsch heritage and unique approach to acoustic

design. Trends in home interior and furniture were also factored in, as was the current audio market landscape.

The result is a speaker range that awlessly melds classic Klipsch® audio with

the latest in home furniture trends. The striking design hints at the power

and performance inside, while maintaining a high degree of sophistication

and beauty. More importantly, the arched shape of the loudspeaker actu-

ally contributes to its remarkable sound by breaking up standing waves at

higher frequencies.

Power. Detail. Emotion. Combined, these qualities are the embodiment of

our core philosophy. And all are expressed—beautifully—in the brilliant

Palladium loudspeakers. We invite you, our customer, to share with us the

pride of ownership in this extraordinary product for many gratifying years.

Page 4 Page 5

Preparing the LoudspeakerGetting Started

Unpacking (P-38F / P-37F)

Please follow the unpacking instructions fully and in the order shown below. These loudspeakers are

heavy! Do not lift or move these speakers by yourself. Always have someone help you.

Open the carton aps

Lightly tape each ap to the box

with short pieces of tape

Remove the top packing piece

Carefully invert the carton

Lift o the carton

Lift o the center and base packing pieces

The loudspeaker is

ready for connection

• The grille box contains: one upper grille; one lower grille, (P-38F / P-37F) or one single-piece grille

(P-17B, P-27C and P-27S).

• The Accessories box for P-38F and P-37F contain: four long spikes; four short spikes; four spike col-

lars; four spike seats; one Allen wrench.

• The Accessories box for P-27C contains: two short front spikes; one short-barrel rear spike; one

long-barrel rear spike; three spike collars; three spike seats; one Allen wrench.

• The P-17B and P-27S do not have an accessory box, but do include an Allen wrench with the

owner’s manual packet.

• There is a pair of gloves located in a pocket in the side of the packing carton under the owner’s manual.

Identify all the components. If any item is missing or damaged, report this immediately to your Klipsch

dealer and the transport contractor for action.

Connection Procedure:

There is a specic procedure to be followed:

• Switch o and unplug the amplier/s and all source electronics from the mains power.

• Place both loudspeakers in the general area where you want them.

• Connect each loudspeaker following the instructions under the “connecting the loudspeakers” section of

this manual.

• Attach the spikes, following the instructions under the “nalizing the assembly” section of this manual.

• Run both sets of loudspeaker cables to the amplier.

• Connect the amplier.

• Finalize the position of the loudspeakers.

• Finally, t the grilles (if desired).

TAKE CARE NOT TO TOUCH THE DRIVE UNITS WHEN YOU MOVE THE LOUDSPEAKERS AROUND.

TO PRESERVE THE FINISH, WHEN HANDLING YOUR SPEAKERS, USE THE GLOVES THAT ARE PROVIDED.

Fitting and Removing the Grilles

The grilles are magnetically attached to the cabinet. Specially designed magnets

are housed inside the front wall of the loudspeaker, so that if you wish to operate

the loudspeaker with the grilles removed, no grille mounting hardware is visible.

This preserves the smooth lines of the loudspeaker.

To t the grilles: Fit the top grille rst and line it up with the top and sides of the

cabinet. For the P-38F, P-37F and P-17B there is a small lip on the top of the grille

that should rest on the top of the cabinet. Now, t the lower grille, lining up the

top of the lower grille with the bottom of the upper grille. You may now remove

the top grille if you wish. (The P-17B, P-27C and P-27S have a single one-piece

grille only.)

Although operating the loudspeakers with the grilles on or o is a matter

of personal taste, moving or connecting the loudspeakers should always be done

with the grilles removed. Be especially careful not to touch the drive units.

What’s in the box?

Remove the Grille box

Remove the Accessories box

Remove the Owner’s manual

and gloves

Product specificaties

Merk:	Klipsch
Categorie:	Luidspreker
Model:	P-38F

Heb je hulp nodig?

Als je hulp nodig hebt met Klipsch P-38F stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Luidspreker Klipsch

Klipsch COMM SAT SPEAKER SYSTEM Handleiding

5 September 2023

Klipsch B-10 Handleiding

5 September 2023

Klipsch KPT-1260-H Handleiding

5 September 2023

Klipsch Klipsch AW-500-SM Handleiding

5 September 2023

Klipsch P-17B Handleiding

5 September 2023

Klipsch Klipsch R-2650-C Handleiding

5 September 2023

Klipsch KSP 300 Handleiding

5 September 2023

Klipsch P-38F Handleiding

5 September 2023

Klipsch KSP 400 Handleiding

5 September 2023

Klipsch R-5800-W II Luidspreker Handleiding

28 December 2022

Handleiding Luidspreker

Nieuwste handleidingen voor Luidspreker

Nikkei NWS04 Handleiding

26 Oktober 2024

JBL AS5 Handleiding

2 November 2024

Envivo ENV-1690 Handleiding

21 December 2023

JBL 4367 Handleiding

25 Oktober 2023

JBL 4349 Handleiding

25 Oktober 2023

JBL B-8IC Handleiding

25 Oktober 2023

JBL B-6ICDT Handleiding

25 Oktober 2023

Tannoy turnberry he Handleiding

15 Oktober 2023

Omnitronic PAS-212 Handleiding

9 Oktober 2023

KEF c5 Handleiding

8 Oktober 2023