Klark Teknik DI 10A Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Klark Teknik DI 10A (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 233 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
PRO DI ACTIVE DI 10A
Active DI Box with MIDAS Transformer,
Extended Dynamic Range and Phantom/Battery Operation
PAD – switch incrementally reduces the INPUT gain sensitivity to handle unusually loud
input signals. The PAD switch oers gain reduction settings of 0 dB (guitar), 20 dB (line)
or 40 dB (speaker).
INPUT – connections accept balanced and unbalanced signals over cables with ¼" TRS,
¼" TS or XLR plugs.
THRU – output sends out a copy of the INPUT signal and accepts connections from cables
with ¼" TRS or ¼" TS plugs.
POWER – switch turns the unit on and o.
ON – LED lights up to indicate the following conditions:
• battery power active = LED blinks
• battery power o = LED o
• phantom power active = LED lights without blinking
LIFT / EARTH – switch can be used to connect or disconnect the ground link between
the INPUT and OUTPUT jacks in order to reduce hum or prevent group loops. The LIFT /
EARTH switch’s ability to reduce hum or prevent ground loops depends on the grounding
of connected devices. When the switch is in the LIFT position, the ground connection
between INPUT and OUTPUT is disconnected.
OUTPUT – XLR jack sends out a balanced version of the INPUT signal to your mixing board
or other processing device.
BATTERY COMPARTMENT – contains the 9 V battery used to power the unit. Loosen the
screw to open the compartment and replace the battery.
NOTE: In the event that phantom power fails, the unit will automatically switch to
battery power.
LEGAL DISCLAIMER
MUSIC Tribe accepts no liability for any loss which may be suered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specications,
appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE, TANNOY, TURBOSOUND,
TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA and COOLAUDIO are trademarks or registered trademarks of MUSIC Group IP Ltd. © MUSIC Group IP Ltd. 2018 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding MUSIC Tribes Limited Warranty, please see complete details online at music-group.com/warranty.
Specications
Audio Connections
Input 1 x XLR, balanced
1 x ¼" TS, unbalanced
Input Impedance > 250 kΩ
Thru 1 x ¼" TS, unbalanced
Output 1 x XLR, balanced
Load Impedance > 600 Ω
Maximum Input level +10 / +30 / +50 dBu
System
Frequency Response 10 Hz to 90 kHz, ±3 dB
THD+N < 0.02 % @ 1 kHz, 0 dBu
Noise Level < -112 dBu
PAD Switch 0 / -20 / -40 dB
Power Supply
Phantom power 18 V DC to 48 V DC
Battery 9 V Blockcell 6LR61
Dimension / Weight
Dimensions (W x D x H) 118 x 120 x 64 mm (4.6 x 4.7 x 2.5")
Weight 0.56 kg (1.2 lbs)
How to insert the battery
BATTERY
BATTE
BATTERY


Product specificaties

Merk: Klark Teknik
Categorie: Niet gecategoriseerd
Model: DI 10A

Heb je hulp nodig?

Als je hulp nodig hebt met Klark Teknik DI 10A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Klark Teknik

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Smeg

Smeg GTA-6 Handleiding

21 November 2024
Smeg

Smeg KIT6CX Handleiding

21 November 2024
Senal

Senal SCS-98 Handleiding

21 November 2024
Senal

Senal ASM-6 Handleiding

21 November 2024
Senal

Senal ASM-MNTKIT Handleiding

21 November 2024
Senal

Senal SMS-45 Handleiding

21 November 2024
Smeg

Smeg KIT6PX Handleiding

21 November 2024
Senal

Senal SCI-3212MP Handleiding

21 November 2024
Senal

Senal OLM-2S-P Handleiding

21 November 2024