KitchenAid KEWS105BSS Handleiding

KitchenAid Warmtelade KEWS105BSS

Lees hieronder de 📖 handleiding in het Nederlandse voor KitchenAid KEWS105BSS (12 pagina's) in de categorie Warmtelade. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
INSTALLATION INSTRUCTIONS
24" (61 CM), 27" (68.6 CM), AND 30" (76.2 CM)
INDOOR/OUTDOOR ELECTRIC WARMING DRAWER
INSTRUCTIONS D'INSTALLATION
TIROIR-RÉCHAUD ÉLECTRIQUE POUR USAGE
INTÉRIEUR/EXTÉRIEUR DE
24" (61 CM), 27" (68,6 CM), ET 30" (76,2 CM)
Table of Contents/Table des matières
WARMING DRAWER SAFETY ......................................................2
INSTALLATION REQUIREMENTS ................................................3
Tools and Parts ............................................................................3
Location Requirements................................................................3
Electrical Requirements ...............................................................4
INSTALLATION INSTRUCTIONS ..................................................5
Install Warming Drawer................................................................5
Complete Installation ...................................................................5
CUSTOM DRAWER FRONT INSTALLATION
INSTRUCTIONS FOR WARMING DRAWERS..............................6
Tools and Parts ............................................................................6
Install Custom Drawer Front Panel..............................................6
CURIDU TIROIR-CHAUD ...............................................7
EXIGENCES D'INSTALLATION.....................................................8
Outillage et pièces........................................................................8
Exigences d'emplacement...........................................................8
Spécifications électriques ............................................................9
INSTRUCTIONS D'INSTALLATION.............................................10
Installation du tiroir-réchaud ......................................................10
Achever l'installation ..................................................................10
INSTRUCTIONS D'INSTALLATION DE LA FADE DU
TIROIR PERSONNALISÉ POUR TIROIR-CHAUD ................11
Outillage et pièces......................................................................11
Installation du panneau de la façade du tiroir personnali......11
IMPORTANT:
Save for local electrical inspector's use.
IMPORTANT :
À conserver pour consultation par l'inspecteur local des installations électriques.
W10600304A
2
WARMING DRAWER SAFETY
You can be killed or seriously injured if you don't immediately
You can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.
These words mean:
follow instructions.
instructions.
DANGER
WARNING
3
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
Phillips screwdriver
Drill
1³⁄₈" (3.5 cm) hole saw
Parts supplied
4 - #8-18 x ⁵⁄₈" screws
Lens (for panel ready models)
Check local codes. Check existing electrical supply. See
“Electrical Requirements.”
It is recommended that all electrical connections be made by a
licensed, qualified electrical installer.
Location Requirements
IMPORTANT: Observe all governing codes and ordinances.
Cutout dimensions that are shown must be used. Given
dimensions provide minimum clearance with warming drawer.
Recessed installation area must provide complete enclosure
around the recessed portion of the warming drawer.
Grounded electrical supply is required. See “Electrical
Requirements” section.
Electrical supply outlet should be located in the rear wall on
the upper right-hand side of the cutout or in an adjacent
cabinet. The outlet must be recessed. If the electrical outlet is
located in an adjacent cabinet, a 1³⁄₈" (3.5 cm) minimum
diameter hole should have been drilled in the back of the
cutout or support surface to pass the power supply cord
through to the outlet.
Warming drawer support surface must be solid, level and
flush with bottom of cabinet cutout.
Warming drawers with oiled bronze, black glass, and white
glass panels are approved for indoor use only.
For best performance results, make sure the warming drawer is
leveled before completing installation. There is no way to level the
warming drawer after it has been installed. If the installation is not
level, the door may slide open or not seal tightly, allowing heat to
escape.
NOTE: If installing the warming drawer below another product,
refer to that product’s literature for any installation requirements.
Product Dimensions
Cabinet Dimensions
Cabinet Side View
WARMING
DRAWER
SIZE
OVERALL
WIDTH (A)
RECESSED
WIDTH (B)
RECESSED
HEIGHT (C)
24"
(61 cm)
23³⁄"
(60.3 cm)
22¹⁄₄"
(56.5 cm)
9"
(22.9 cm)
27"
(68.6 cm)
26³⁄"
(67.9 cm)
25¹⁄₄"
(64.1 cm)
9"
(22.9 cm)
30"
(76.2 cm)
29³⁄"
(75.6 cm)
28¹⁄₄"
(71.8 cm)
9"
(22.9 cm)
A
B
C
Warming
drawer
front
Support surface must be
solid, level, flush with
bottom of cabinet cutout.
22 "³
(57.8 cm)
recessed
oven depth
24"
(61 cm)
min. cutout
depth


Product specificaties

Merk: KitchenAid
Categorie: Warmtelade
Model: KEWS105BSS

Heb je hulp nodig?

Als je hulp nodig hebt met KitchenAid KEWS105BSS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Warmtelade KitchenAid

Handleiding Warmtelade

Nieuwste handleidingen voor Warmtelade