Kinzo 71779 Handleiding

Kinzo Decoupeerzaag 71779

Lees hieronder de 📖 handleiding in het Nederlandse voor Kinzo 71779 (44 pagina's) in de categorie Decoupeerzaag. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/44
350W
POWERTOOLS
W
A
R
R
A
N
T
Y
•
W
A
R
R
A
N
T
Y
•
W
A
R
R
A
N
T
Y
•
W
A
R
R
A
N
T
Y
•
a Jig saw
b Stichsäge
c Decoupeerzaag
d Scie sauteuse
l DekopĂ­rfĹąrĂŠsz
o LupĂ­nkovĂĄ pila
p LupienkovĂĄ pĂ­la
r Wyrzynarka
Intertek
High quality reliable tools.
ECOLINE Jig saw
Stichsäge
230-240
v
50
Hz 0-2800 RPM
LED LIGHT
45Âş
71779 manual.indd 1 31-12-10 14:49
2
AJIG SAW 350W
General Power Tool SafeTy warninGS
WARNING: Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, re and/or serious
injury.
WARNING: Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
1 work area SafeTy
a) Keep work area clean and well lit Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose con-
trol.
2 elecTrical SafeTy
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodied plugs and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord
away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
3 PerSonal SafeTy
a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a
power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inatten-
tion while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool. Carrying power tools with your nger on the switch or
energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool
in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from mov-
ing parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are con-
nected and properly used. Use of dust collection can reduce dust-related hazards.
4 Power Tool uSe and care
a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do
71779 manual.indd 2 31-12-10 14:49
3
A
the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any
adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk
of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other
condition that may affect the power tools operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account
the working conditions and the work to be performed. Use of the power tool for operations different from
those intended could result in a hazardous situation.
5 Service
a) Have your power tool serviced by a qualied repair person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
SPecial SafeTy PrecauTionS
• Donotuseforcuttingpipesorcables.
• Donotusecracked,bluntordamagedblades.
• Donotstartthesawifnobladeistted.
• Checktherearenoobstructionsin/onthesurfaceundertheitemtobecut.
• Donotattempttocutitemsthickerthanthemaximumcuttingdepthoftheblade,orwherethereisinsuf-
cient space for the blade under the item.
• Thesaw’smetalpartsmaybecomeconductiveifthesawcomesintocontactwithalivewire.Therefore
only hold the saw by its insulated handle.
• Checkthattheventilationslotsarenotblocked.
• Alwaysuseafacemaskifexcessiveamountsofdustaregeneratedorcuttingharmfulmaterials.
• Neverremovedust,obstructionsorthelikefromtheworkareawhilethebladeisoperating.
• Neverstopthesawbladebyapplyingpressuretothesawortothesideoftheblade.
• Donotliftthesawfromtheitembeingcutifthebladeisstillrunning.
• Neverplacethesawonatableorworkbenchifithasnotstoppedcompletely.
• Thesawbladewillcontinuetorunashorttimeafterthemachinehasbeenswitchedo.
• Donottouchthebladeormetallingsuntiltheyhavecooled.
• Holdpowertoolbyinsulatedgrippingsurfaces,whenperforminganoperationwherethecuttingaccesso-
ry may contact hidden wiring or its own cord. Cutting accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the operator an electric shock.
71779 manual.indd 3 31-12-10 14:49

Product specificaties

Merk: Kinzo
Categorie: Decoupeerzaag
Model: 71779

Heb je hulp nodig?

Als je hulp nodig hebt met Kinzo 71779 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Decoupeerzaag Kinzo

Kinzo

Kinzo 71779 Handleiding

28 Januari 2023

Handleiding Decoupeerzaag

Nieuwste handleidingen voor Decoupeerzaag

Einhell

Einhell BT-JS 650 E Handleiding

10 December 2023
Batavia

Batavia BT-CJS002 - 7062513 Handleiding

13 Oktober 2023
Powerplus

Powerplus POW1010 Handleiding

25 September 2023
Gude Pro

Gude Pro GDS 16 PRO 55097 Handleiding

22 September 2023
Proxxon

Proxxon DSH-E Handleiding

5 September 2023
Metabo

Metabo BAS250G Handleiding

27 Augustus 2023
Black Decker

Black Decker AST7XC Handleiding

28 Februari 2023
Toledo

Toledo TJS-600 Handleiding

2 Augustus 2023
Felisatti

Felisatti RSF120-1010 Handleiding

23 Juli 2023
Felisatti

Felisatti JSF100 Handleiding

23 Juli 2023