Felisatti RSF120-1010 Handleiding
Felisatti
Decoupeerzaag
RSF120-1010
Lees hieronder de 📖 handleiding in het Nederlandse voor Felisatti RSF120-1010 (28 pagina's) in de categorie Decoupeerzaag. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/28
RSF120/1010E
SERRINHA ALTERNATIVE
Fig.1
Fig.2
Fig.4
Fig.3
Fig.5
3
MACHINE-SPECIFIC SAFETY WARNINGS
- Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring or its own cord. Cutting accessory
contacting a “live” wire may make exposed metal parts of
the power tool “live” and could give the operator an electric
shock.
- Keep hands away from the sawing range. Do not reach
under the workpiece. Contact with the saw blade can lead
to injuries.
- Apply the machine to the workpiece only when switched on.
Otherwise there is danger of kickback when the cutting tool
jams in the workpiece.
- Pay attention that the base plate rests securely on the
material while sawing. A jammed saw blade can break or
lead to kickback.
- When the cut is completed, switch off the machine and then
pull the saw blade out of the cut only after it has come to
a standstill. In this manner you can avoid kickback and can
place down the machine securely.
- Use only sharp, awless saw blades. Bent or unsharp saw
blades can break or cause kickback.
- Do not brake the saw blade to a stop by applying side
pressure after switching off. The saw blade can be damaged,
break or cause kickback.
- Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility company for
assistance. Contact with electric lines can lead to re and
electric shock. Damaging a gas line can lead to explosion.
Penetrating a water line causes property damage or may
cause an electric shock.
- Secure the workpiece. A workpiece clamped with clamping
devices or in a vice is held more secure than by hand.
- Keep your workplace clean. Blends of materials are
particularly dangerous. Dust from light alloys can burn or
explode.
- Always wait until the machine has come to a complete stop
before placing it down. The tool insert can jam and lead to
loss of control over the power tool.
- Never use the machine with a damaged cable. Do not touch
the damaged cable and pull the mains plug when the cable
is damaged while working. Damaged cables increase the risk
of an electric shock.
Product specificaties
Merk: | Felisatti |
Categorie: | Decoupeerzaag |
Model: | RSF120-1010 |
Heb je hulp nodig?
Als je hulp nodig hebt met Felisatti RSF120-1010 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Decoupeerzaag Felisatti
23 Juli 2023
23 Juli 2023
Handleiding Decoupeerzaag
- Decoupeerzaag Bosch
- Decoupeerzaag Panasonic
- Decoupeerzaag DeWalt
- Decoupeerzaag Atika
- Decoupeerzaag Batavia
- Decoupeerzaag Black Decker
- Decoupeerzaag Blucave
- Decoupeerzaag Duro
- Decoupeerzaag Einhell
- Decoupeerzaag Festool
- Decoupeerzaag Gude Pro
- Decoupeerzaag Hyundai
- Decoupeerzaag Kinzo
- Decoupeerzaag Lux Tools
- Decoupeerzaag Makita
- Decoupeerzaag Max
- Decoupeerzaag Metabo
- Decoupeerzaag Parkside
- Decoupeerzaag Powerplus
- Decoupeerzaag Scheppach
- Decoupeerzaag Skil
- Decoupeerzaag Toledo
- Decoupeerzaag Topcraft
- Decoupeerzaag Trotec
- Decoupeerzaag Varo
- Decoupeerzaag Proxxon
- Decoupeerzaag Toolson
Nieuwste handleidingen voor Decoupeerzaag
10 December 2023
13 Oktober 2023
25 September 2023
22 September 2023
5 September 2023
27 Augustus 2023
28 Februari 2023
2 Augustus 2023
9 Augustus 2023
17 Juli 2023