Kicker KMC3 Handleiding

Kicker Radio KMC3

Lees hieronder de 📖 handleiding in het Nederlandse voor Kicker KMC3 (19 pagina's) in de categorie Radio. Deze handleiding was nuttig voor 73 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/19
Owner’s Manual | English
Manual del Propietario | Español
KMC3 Receptor Multi-Media
Benutzerhandbuch | Deutsch
KMC3 Multi-Media-Receiver
Manuel d’utilisation | Française
KMC3 Multi-Media Receiver
KMC3
Multi-Media Receiver
KMC3
1
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.
Caution! Any changes or modiïŹcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC Notice - CAN ICES-3 (B) - This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Avis d’Industrie Canada - Le prĂ©sent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est au-
torisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage; (2) l’utilisateur de l’appareil doit accepter tout brouillage radioĂ©lectrique subi, mĂȘme si le brouillage est susceptible d’en
compromettre le fonctionnement. mauvais fonctionnement de I’appareil.
Cet appareil numériquie de la classe B est conforme à la norme NMB-003 du Canada. CAN NMB-3 (B)
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian
information on RF exposure and compliance.
Le dispositif rencontre l’exemption des limites courantes d’évaluation dans la section 2.5 de RSS 102 et la conformitĂ© Ă  l’exposition de RSS-102 rf, utilisateurs peut
obtenir l’information canadienne sur l’exposition et la conformitĂ© de rf.
FCC ID: RGR-KMC3 IC ID: 11078A-KMC3
2
mounting hole cutout template:
3 inches, 7.62 cm
gabarit de montage trou découpé:
3 pouces, 7,62 cm
plantilla de recorte del agujero de montaje:
3 pulgadas, 7.62 cm
montageloch ausschnittschablone :
3 Zoll, 7,62 cm
print mounting hole cutout template at 8.5”x11” in “Portrait” and “Actual Size”
It is recommended you mark the screw holes for Surface Mounting after making the mounting hole.
Imprima la plantilla de recorte del oriïŹcio de montaje en tamaño 8.5 x 11 pulgadas, con las opciones de con-
ïŹguraciĂłn “Vertical” y “Tamaño real”.
imprimer le patron de dĂ©coupe du trou de ïŹxation au format 8,5”x11” en mode «Portrait» et «Taille rĂ©elle».
Drucken Sie die Ausschnittsschablone fĂŒr das Montageloch bei 8,5” x 11” im Hochformat mit der Einstellung
„TatsĂ€chliche GrĂ¶ĂŸe“ aus.


Product specificaties

Merk: Kicker
Categorie: Radio
Model: KMC3

Heb je hulp nodig?

Als je hulp nodig hebt met Kicker KMC3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Radio Kicker

Kicker

Kicker KMC2 Handleiding

28 Februari 2023
Kicker

Kicker KMC3 Handleiding

7 Februari 2023
Kicker

Kicker KMC5 Handleiding

14 November 2022
Kicker

Kicker KMC4 Handleiding

8 November 2022

Handleiding Radio

Nieuwste handleidingen voor Radio