Key Digital KD-X444S Handleiding

Key Digital Niet gecategoriseerd KD-X444S

Lees hieronder de 📖 handleiding in het Nederlandse voor Key Digital KD-X444S (13 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/13
4K/18G HDBT POH Extenders
(Includes KIT Tx/Rx 4K/40meters 1080P/70meters)
Rev 0 – June 2018
Key Digital®, led by digital video pioneer Mike Tsinberg, develops
and manufactures high quality, cutting-edge technology solutions
for virtually all applications where high-end video and control are
important. Key Digital®
is at the forefront of the video industry for
Home Theater Retailers, Custom Installers, System Integrators,
Broadcasters, Manufacturers, and Consumers.
The Experts in Digital Video Technology and Solutions ™
Key Digital® Systems 521 East 3rd Street Mount Vernon, NY 10553 :: ::
Phone 914.667.9700 Fax 914.668.8666 Web www.keydigital.com : : :
1
About KD-X444S
Key Digital
®
KD-X444S is an HDCP2.2 compliant long range HDBaseT kit (Tx + Rx) with
support of 18Gbps 4K/UHD signal extension for the latest digital video standards.
KD-X444S extends UHD/4K signals up to 130 ft. (40m) using CAT5e/6 cabling. 1080p
signals may be extended up to 230 ft. (70m). In addition to HDMI video and audio
signals, KD-X444S carries IR and RS-232 for controlling remotely located equipment.
Key Features
➔
HDBaseT via Single CAT5e/6 UTP/STP Extension:
With fully automatic adjustment of
feedback, equalization, and amplification depending on cabling length
➔
4K Support:
4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to
18Gbps bandwidth)
➔
Flexible Power over HDBaseT:
Only one power connection needed.
Tx may power Rx, or Rx may power Tx.
➔
Low Profile:
Super slim chassis design
➔
Signal Extension:
For resolution and cable quality
»4K/UHD: Up to 130 ft. (40m) using CAT5e/6
»1080p: Up to 230 ft. (70m) maximum (Valens VS10)
➔
10G Pass-thru:
Mode enables uncompressed 10.2Gbps signal extension
➔
HDR10 (High Dynamic Range):
More life-like images through a greater range of
luminance levels
➔
HDCP 2.2:
Compliancy up to HDCP 2.2 and backward compliant
➔
Deep Color Support:
Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
➔
EDID Control:
Internal library with 15 EDID handshakes including 4K with HDR in
addition to native EDID data from Output/Display device connected to Rx
➔
Hot Plug Detection Control:
Enables integrator to choose if active signal voltage is
forced to connected input and output devices
Table of Contents
About KD-X444S 1 ............................................................
Quick Setup Guide 3 ...........................................................
Installation and Operation 3 ......................................................
Application Example 5 ..........................................................
Connections and LEDs 6 ........................................................
LED Indicator Lights 10 ..........................................................
Settings and Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Extending IR and RS-232 Control 16.................................................
Specifications 19...............................................................
Important Product Warnings & Safety Instructions: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
How to Contact Key Digital
®
.....................................................21
Warranty Information 21..........................................................
© 2018 Key Digital, Inc. All rights reserved.
Note: Please visit www.keydigital.com for the latest product documentation and software
downloads. Product features and specifications are subject to change without notice.
2 3
➔
Full Buffer System
™
:
Manages TMDS re-clocking / signal re-generation,
HDCP authentication with source & display, EDID Control handshake,
and Hot Plug Detection control
➔
IR Sensor:
Sensor powering via +5V on IR In ports collects line-of-sight IR from
remote(s) without external IR connecting block
➔
Up/Down IR:
Two channels of IR enable control to/from devices or control systems
connected to Tx and Rx units
➔
RS-232:
Bi-Directional control to/from Tx and Rx unit on Phoenix connector
➔
Lossless compressed digital audio:
Support for Dolby
®
TrueHD,
Dolby
®
Digital Plus, Dolby Atmos
®
, and DTS-HD Master Audio
™
➔
CEC Pass-thru:
For inter-device control between input and output HDMI channel
Accessories
»1x 12V/1.66A, 20W DC Power Supply (Screw-In Type). SKU: KD-PS20W12VQ
»4x Mounting Brackets
»1x IR Emitter
»1x IR Sensor
»2x 3-pin Phoenix Connector
»2x 4-pin Phoenix Connector
Quick Setup Guide
Step 1:
Find a safe and convenient location to mount or place your KD-X444S units
Step 2:
Begin with the Tx and Rx units and all input/output devices turned off with power
cables removed
Step 3:
Connect your HDMI source to the input port of the Tx unit
Step 4:
Connect your HDMI display to the output port of the Rx unit
Step 5:
Connect a CAT5e/6 UTP/STP cable between Tx and Rx unit
Step 6:
Connect additional IR and/or RS-232 control connections and IR sensors. Refer
to Settings and Adjustments section to ensure that the Control Rotary is set
appropriately for desired control extension.
Step 7: BEFORE
connecting power supply to power outlet, screw-in the power supply to
the Tx or Rx unit
Step 8: AFTER
all connections are made, plug-in power supplies to power outlets
Step 9:
Power on input/output devices
Installation and Operation
Before permanently securing the unit for final installation, test for proper operation of
the unit and cables in your system. It is recommended that you leave enough ventilation
space to provide sufficient airflow and cooling.
You MUST use the Power Supply provided with your unit or you VOID the Key Digital
®
Warranty and risk damage to your unit and associated equipment.

Product specificaties

Merk: Key Digital
Categorie: Niet gecategoriseerd
Model: KD-X444S

Heb je hulp nodig?

Als je hulp nodig hebt met Key Digital KD-X444S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Key Digital

Key Digital

Key Digital KD-PS22UTx Handleiding

10 December 2024
Key Digital

Key Digital KD-X444S Handleiding

12 September 2023
Key Digital

Key Digital KD-X444SP Handleiding

12 September 2023
Key Digital

Key Digital KD-XWPS Handleiding

11 September 2023
Key Digital

Key Digital KD-IRKIT300 Handleiding

11 September 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Protector

Protector AS-5030.3 V2 Handleiding

21 December 2024
Sabrent

Sabrent AU-MMCW Handleiding

21 December 2024
Sabrent

Sabrent AU-2X35 Handleiding

21 December 2024
Sabrent

Sabrent CB-RS232 Handleiding

21 December 2024
Owon

Owon 500W Handleiding

21 December 2024
Owon

Owon 300W Handleiding

21 December 2024
Sabrent

Sabrent SB-RKTQ4-1TB Handleiding

21 December 2024
Sabrent

Sabrent SB-RKTQ-1TB Handleiding

21 December 2024
Sabrent

Sabrent SB-ROCKET-1TB Handleiding

21 December 2024
Sabrent

Sabrent SB-HTSS Handleiding

21 December 2024