Kern ODC 851 Handleiding
Kern
Miscroscoop
ODC 851
Lees hieronder de 📖 handleiding in het Nederlandse voor Kern ODC 851 (4 pagina's) in de categorie Miscroscoop. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/4
ODC 85 BA- - -e-2313
KERN & Sohn GmbH
Ziegelei 1
D-72336 Balingen
E-Mail: info@kern sohn.com -
Tel: - - +49 [0]7433 9933-0
Fax: +49 - -[0]7433 9933- 149
Interne sohn.comt: -www.kern
User instructions
Microscope camera
KERN - ODC 85
ODC 851, ODC 852
Version 1.3
09/2023
2
ODC 85 BA- - -e-2313
KERN
ODC- 85
Version 1.3 09 3 /202
User instructions
Microscope camera
Before use
You should device ensure that the is not exposed to direct sunlight, temperatures which
are too high or too low, vibrations, dust or a high level of humidity.
The ideal temperature range is between 0 and 40°C and a relative humidity of 85%
should not be exceeded.
Always make sure that you use an approved power cable. possible damages by Thus,
reason of the development of overheating (fire hazard) or an electric shock can be
prevented.
Do not open the housing and touch the internal component. There is the risk of
damaging them and affecting the functionality of the camera.
In order to carry out cleanings always disconnect the power cable from the camera.
Always keep the sensor clear from dust and do not touch it. Otherwise, there is the risk
of affecting the microscopic image. In case of non use always attach the protective -
covers.
Technical data
Model
KERN
Resolution
Interface
Sensor
Frame rate Colour /
Monochrome
Supported operating
systems
ODC 851 2 MP HDMI,
USB 2.0,
SD
1/2,8“ CMOS - 30 60 fps Colour Win, XP, Vista, 7, 8, 10
ODC 852 5 MP HDMI,
USB 2.0,
SD, WiFi
1/1,8“ CMOS 25 60 – fps Colour Win, XP, Vista, 7, 8, 10
GB
3
ODC 85 BA- - -e-2313
Scope of delivery
-
Microscope camera
-
HDMI cable
-
USB cable (ODC 851)
-
SD card
-
WiFi adapter (ODC 852)
-
Object micrometre for calibration
-
Software CD
Free download:
www.kern DOWNLOADS- > sohn.com > SOFTWARE > Microscope VIS Pro
-
Eyepiece adapter 23,2 (Ø mm)
-
Adjustment rings (Ø 30,0 mm + Ø 30,5 mm) for eyepiece adapter -
USB mouse
-
Power supply
Mounting
1. Remove the black cover at the bottom of the camera.
2. - The thread, where the cover was attached, is a standardised C
mount thread. Thus, there are special C mount adapters needed
for the connection to a microscope.
3. For the mounting to the microscope the C mount adapter is
attached to the connection point of the microscope. After that the
camera must be screwed onto the C mount adapter.
Important:
The choosing mount C of the right adapter depends on the used
microscope model. It has to be an adapter, which is adjusted to
the construction of the microscope and recommended by the
manufacturer as appropriate for the relevant microscope.
4. If necessary, adjust the microscope according to the trinocular
usage (with help of the trino toggle rod / trino toggle wheel).
Product specificaties
| Merk: | Kern |
| Categorie: | Miscroscoop |
| Model: | ODC 851 |
Heb je hulp nodig?
Als je hulp nodig hebt met Kern ODC 851 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Miscroscoop Kern
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
29 Maart 2025
29 Maart 2025
29 Maart 2025
Handleiding Miscroscoop
- Miscroscoop Nikon
- Miscroscoop Bresser
- Miscroscoop Dnt
- Miscroscoop Hama
- Miscroscoop Leica
- Miscroscoop Maginon
- Miscroscoop National Geographic
- Miscroscoop PCE Instruments
- Miscroscoop Reflecta
- Miscroscoop Steinberg
- Miscroscoop Toolcraft
- Miscroscoop Traveler
- Miscroscoop Veho
- Miscroscoop Vivitar
- Miscroscoop Barska
- Miscroscoop Celestron
- Miscroscoop Levenhuk
- Miscroscoop Zeiss
- Miscroscoop Carson
- Miscroscoop Swift
- Miscroscoop Ideal Tek
- Miscroscoop Discovery
- Miscroscoop BeaverLab
- Miscroscoop Dino-Lite
- Miscroscoop National Optical
Nieuwste handleidingen voor Miscroscoop
29 Maart 2025
26 Maart 2025
8 Januari 2025
15 December 2024
13 December 2024
13 December 2024
12 December 2024
12 December 2024
16 Oktober 2024
21 Augustus 2024