Kern ODC 841 Handleiding

Kern Miscroscoop ODC 841

Lees hieronder de 📖 handleiding in het Nederlandse voor Kern ODC 841 (3 pagina's) in de categorie Miscroscoop. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
ODC 82_83_84 BA- - -e-2313
KERN & Sohn GmbH
Ziegelei 1
D-72336 Balingen
E-Mail: info@kern sohn.com -
Tel: - - +49 [0]7433 9933-0
Fax: +49 - -[0]7433 9933- 149
Interne sohn.comt: -www.kern
User instructions
Microscope camera
KERN - ODC 82, ODC- 83, ODC- 84
ODC 825
ODC 831, ODC 832
ODC 841
Version 1.3
09/2023
2
ODC 82_83_84 BA- - -e-2313
KERN
ODC- 82, ODC- 83, ODC- 84
Version 1.3 09 /2023
User instructions
Microscope camera
Before use
You should device ensure that the is not exposed to direct sunlight, temperatures which
are too high or too low, vibrations, dust or a high level of humidity.
The ideal temperature range is between 0 and 40°C and a relative humidity of 85%
should not be exceeded.
Always make sure that you use an approved power cable. ages by Thus, possible dam
reason of the development of overheating (fire hazard) or an electric shock can be
prevented.
Do not open the housing and touch the internal component. There is the risk of damaging
them and affecting the functionality of the camera.
In order to carry out cleanings always disconnect the power cable from the camera.
Always keep the sensor clear from dust and do not touch it. Otherwise, there is the risk
of affecting the microscopic image. In case of non use always attach the protective -
covers.
Technical data
Model
KERN
Resolution
Interface
Sensor
Frame rate Colour /
Monochrome
Supported operating
systems
ODC 825 5,1 1/2,5“ MP USB 2.0 CMOS - 6,8 55 fps Colour Win, XP, Vista, 7, 8, 10
ODC 831 3,1 1/3“ MP USB 3.0 CMOS 27,3 53,3 – fps Colour 8, Win, XP, Vista, 7, 10
ODC 832 5,1 1/2,5“ MP USB 3.0 CMOS 14,2 101,2 – fps Colour 8, Win, XP, Vista, 7, 10
ODC 841 20 1“ MP USB 3.0 CMOS 15 60 – fps Colour 8, Win, XP, Vista, 7, 10
GB
ODC 82_83_84 BA- - -e-2313
3
Scope of delivery
-
Microscope camera
-
USB cable
-
Object micrometer for calibration
-
Software CD
Free download:
www.kern DOWNLOADS- > sohn.com > SOFTWARE > Microscope VIS 2.0 Pro
-
Eyepiece adapter 23,2 (Ø mm)
-
Adjustment rings (Ø 30,0 mm + Ø 30,5 mm) for eyepiece adapter
Mounting
1. Remove the black cover at the bottom of the camera.
2. The thread, where the cover was attached, is a standardised C
mount thread. Thus, there are special C mount adapter needed for
the connection to a microscope.
3. For the mounting to the microscope the C mount adapter is attached
to the connection point of the microscope. After that the camera must
be screwed onto the C mount adapter.
Important:
The choosing of the right C mount adapter depends on the used
microsco mustpe model. It be an adapter, which is adjusted to the
construction of the microscope and recommended by the
manufacturer as appropriate for the relevant microscope.
4. If necessary, adjust the microscope according to the trinocular usage
(with help of th toggle rode trino / trino toggle wheel).
PC connection
1. Establish USB connection via USB cable.
2. Installing the software with help of the CD / download.
3. internal -The software "User Guide" includes all information and
instructions about the operation of the software or of digital
microscopy.


Product specificaties

Merk: Kern
Categorie: Miscroscoop
Model: ODC 841

Heb je hulp nodig?

Als je hulp nodig hebt met Kern ODC 841 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Miscroscoop Kern

Handleiding Miscroscoop

Nieuwste handleidingen voor Miscroscoop