Kenwood XM50R Handleiding

Kenwood Speaker XM50R

Lees hieronder de 📖 handleiding in het Nederlandse voor Kenwood XM50R (6 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

Take the time to read through this instruction manual.

Familiarity with installation and operation procedures will help you obtain the best performance from your new power amplier.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the

model and serial numbers whenever you call upon your KENWOOD dealer for information or service on the product.

Model XM50F Serial number

Model XM50R Serial number

US Residents Only

XM50F

XM50R

5.25” COAXIAL SPEAKERS DESIGNED AND ENGINEERED TO CONNECT

AND MOUNT TO 2006-2013 HARLEY-DAVIDSON® TOURING MODEL

MOTORCYCLES WITH ADVANCED AUDIO RADIOS OR 1998-2013

HARLEY-DAVIDSON® TOURING MODEL MOTORCYCLES WITH 2 OHM

STABLE AMPLIFIERS INSTALLED

INSTRUCTION MANUAL

JVCKENWOOD Corporation

Contents

Section 1: XM50F Front Speaker Installation Instructions....3

Section 2: XM50R Rear Speaker Installation Instructions.....4

Warranty Info.................................................................................5

KENWOOD XM50F and XM50R speakers will work

best when powered by an amplier. They have an

imedance of 2 ohm and will cause damage if wired

directly to the built-in radio power in ‘98-’05 factory

Harley Davidson motorcycles.®

Safety precautionsSafety precautions

CAUTION

To avoid the risk of human injury o r pro perty

damage, be sure to read and observe the following

safety precautions:

• Consult a professional technician for installing and

connecting the speaker. — Incorrect installation may

lead to trac accidents or malfunctions.

• Avoid installation where the speaker in unstable. —

Make sure that the speaker is stationary and does not

rattle. Displacement of the speaker may cause injury.

• Do not modify the speaker. — Doing so may result in

smoke or re.

• Keep the volume of sound at an optimum level. —

Not being able to hear sounds from your surroundings

can lead to trac accidents.

• In case of abnormality, stop the use and disconnect

the speaker. — If operation is continued, smoke or re

may result. Disconnect the speaker and ask servicing.

• Always wear protective eyewear during installation.

• To prevent short-circuit, keep all wiring away from

moving parts, sharp edges, cut metal, etc.

• When removing or installing the grille, be careful not

to brush the unit with the edge of the grille.

• Do not switch ON power until wiring is completed.

FOR PROPER INSTALLATION AND USE

Please read the instructions carefully before using

this speaker:

• Be careful not to accidentally kick or apply any sort of

strong impact to the speaker.

• To prevent damaging the speaker, turn o the power

of the amplier before connecting it to the speaker.

• Do not use the provided parts for other purposes

Otherwise malfunction or re hazard could result.

NOTE

Observe the following cautions to prevent damage

to the speakers:

• You cannot input the same power as “peak power”

continually.

• When the volume is set too high, the sound may be

distorted or abnormal. Reduce the volume promptly in

case of such phenomena.

Section 1 - XM50F Front Speaker Installation

Instructions

Installation procedure

1. With your ignition switch in the “OFF” position, remove your outer fairing/headlamp

assembly and set it aside. Refer to a service manual if you need help with this. It’s always

a good idea to have a towel or something similar on your front fender to avoid dings or

scratches if anything is dropped.

2. Take the 2 wires o each speaker by gently pulling one at a time. Undo the screws that

attach each speaker/grille assembly to the inner fairing and remove them. Gently pull the

stock speaker out of each grille assembly.

3. Although the XM50F speakers will work behind the factory grille cloth, the metal mesh

grilles in this kit are designed to replace the front speaker grille cloth on 1998-2013 HD

Street Glides, Ultras, Classics, and Standards. The factory grille cloth is glued to a plastic

mesh, and together, is two-way taped to the main body of the grille assembly. You can

usually peel away the mesh from the body of the grille by hand. With the factory grille

cloth/mesh o, you should see the exposed two-way tape used to hold the factory mesh

on the main grille body. Before applying the new mesh, have a look as you will see it only

“lines up” one way.

4. “Clip” the XM50F speaker into each grille assembly so the speaker terminals are adjacent

to the thickest part of the speaker/grille assembly. When installed, this puts the speaker

terminals in the 12 o’clock (top) position. You DO NOT want the speaker connectors in

the 6 o’clock (bottom) position, as they may short out against the silver horizontal fairing

bracket. Place your new speaker/grille assembly onto the inner fairing and re-attach each

one using the OE screws. A hand screwdriver is recommended for this step.

5. Since these speakers are a direct replacement for the OE speakers, the female OE

“in-line” connectors mate with the male connectors on each speaker and only go on

one way. If you are replacing previously installed aftermarket speakers, you may need

to re-install the correct sized connectors (not supplied) onto the factory speaker wires,

noting that the smaller connector is the positive (+).

6. Once you are condent the factory wires are correctly attached to the new speakers,

turn on your radio to conrm that both speakers are playing. Then, re-install your fairing/

headlamp assembly.

Product specificaties

Merk:	Kenwood
Categorie:	Speaker
Model:	XM50R

Heb je hulp nodig?

Als je hulp nodig hebt met Kenwood XM50R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Speaker Kenwood

Kenwood KFC-WPS1000F Handleiding

16 April 2024

Kenwood KFC-P509PS Handleiding

8 Juli 2023

Kenwood XM50F Handleiding

7 Juli 2023

Kenwood KFC-P709PS Handleiding

27 Juni 2023

Kenwood KFC-XS1704 Handleiding

13 Juni 2023

Kenwood XM50R Handleiding

9 Juni 2023

Kenwood XM69R Handleiding

7 Juni 2023

Kenwood KFC-W110S Handleiding

3 Juni 2023

Kenwood XM65F Handleiding

3 Juni 2023

Kenwood XM65R Handleiding

29 Mei 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Samson Rubicon R8a Handleiding

22 November 2024

Sony SS-SPG01 Handleiding

22 November 2024

Sony SS-MB200H Handleiding

22 November 2024

Sony SS-MB300H Handleiding

22 November 2024

JBL Studio 690 Handleiding

22 November 2024

JBL Studio 680 Handleiding

22 November 2024

Kramer Tavor 8-Sub Handleiding

21 November 2024

Kramer Galil 6-AW Handleiding

21 November 2024

Extron SM 28 Handleiding

21 November 2024

JBL RM10 Handleiding

20 November 2024