Kenwood KSC-SW11 Handleiding

Kenwood Autospeaker KSC-SW11

Lees hieronder de 📖 handleiding in het Nederlandse voor Kenwood KSC-SW11 (61 pagina's) in de categorie Autospeaker. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/61

KSC-SW11

POWERED ENCLOSED SUBWOOFER

INSTRUCTION MANUAL

CAISSON D’EXTRÊME GRAVE AMPLIFIÉ

MODE D'EMPLOI

GEKAPSELTER SUBWOOFER MIT VERSTÄRKER

BEDIENUNGSANLEITUNG

SUBWOOFER MET SPANNINGSCIRCUIT

GEBRUIKSAANWIJZING

ENGLISH FRANÇAIS DEUTSCH NEDERLANDS

ENGLISH

2 English

IMPORTANT SAFETY INSTRUCTIONS

Caution: Read this page carefully to ensure safe operation.

WARNI

RNI

RNING

NG WARNING

• Before mounting or wiring etc., be sure to remove the

wire from the battery minus terminal.

(Not doing so can cause shorts or fires.)

• When extending the ignition, battery, or ground wires,

make sure to use automotive-grade wires or other wires

with a 0.75mm2 (AWG18) or more to prevent wire deterio-

ration and damage to the wore coating.

• To prevent a short circuit, never put or leave any metallic

objects (such as coins or metal tools) inside the speaker.

• In the event the unit generates smoke or abnormal smell,

immediately switch the power OFF. After this, please

contact your dealer or nearest service station as soon as

possible.

POWER OFF!

• Connect the speaker to DC 12V, negative ground.

• Do not attempt to open or modify the unit, for this could

cause fire hazard or malfunction.

• After taking the unit out of the polyethylene bag, be sure

to dispose of the polyethylene bag out of the reach of

children. Otherwise, they may play with the bag, which

could cause hazard of suffocation.

CAUTION

CAUTION CAUTION

• Installation and wiring of the product requires expert skill

and experience. To ensure safety, be sure to have your

dealer or specialist perform the installation and wiring.

• Do not install the speaker in a spot exposed to direct sun-

light or excessive heat or humidity.

• Do not install the speakers in locations which may be

subject to water or moisture.

• Do not install the speakers in unstable locations or loca-

tions subject to dust.

• If the fuse blows, after checking to see if the wiring cord

has shorted, be sure to replace with the stipulated size

(amperage) fuse as displayed on the fuse box.

(Using fuses other than the stipulated size can cause fires.)

Check the display!

To replace the fuse, refer to the vehicle instruction manu-

al.

• To prevent a short circuit when replacing a fuse, discon-

nect the wiring harness at first.

• Do not use gasoline, naphtha, or any type of solvent to

clean the speaker. Clean by wiping with a soft, dry cloth.

• Connect the speaker wires to appropriate speaker con-

nectors separately. Sharing the negative wire of the

speaker or grounding speaker wires to the metal body of

the car can cause this unit to fail.

• When making a hole under a seat, inside the trunk, or

somewhere else in the vehicle, check that there is noth-

ing hazardous on the opposite side such as a gasoline

tank, brake pipe; or wiring harness, and be careful not to

cause scratches or other damage.

• For ground wire mounting, do not fasten the wire to an

airbag, steering or brake line system or other critical safe-

ty unit bolts or nut.

(Can cause accidents.)

• When mounting, be sure to mount in a place that will

not interfere with driving or be dangerous to passengers

during sudden braking etc.

(Cause of injury or accidents.)

Information on Disposal of Old Electrical and Elec-

tronic Equipment (applicable for countries that

have adopted separate waste collection systems)

Products with the symbol (crossed-out

wheeled bin) cannot be disposed as house-

hold waste. Old electrical and electronic

equipment should be recycled at a facility

capable of handling these items and their

waste by products.

Contact your local authority for details in locating a

recycle facility nearest to you. Proper recycling and

waste disposal will help conserve resources whilst

preventing detrimental effects on our health and the

environment.

For Turkey

Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik

Elektrikli ve Elektronik Eşyalarin Kontrolü Yönetmeliğe

uygun olarak üretilmiştir.

Eski Elektrik ve Elektronik Ekipmanların İmha Edil-

mesi Hakkında Bilgi (ayrı atık toplama sistemlerini

kullanan ülkeleri için uygulanabilir)

Sembollü (üzerinde çarpı işareti olan çöp

kutusu) ürünler ev atıkları olarak atılamaz.

Eski elektrik ve elektronik ekipmanlar, bu

ürünleri ve ürün atıklarını geri dönüştürebile-

cek bir tesiste değerlendirilmelidir.

Yaşadığınız bölgeye en yakın geri dönüşüm tesisinin

yerini öğrenmek için yerel makamlara müracaat edin.

Uygun geri dönüşüm ve atık imha yöntemi sağlığımız

ve çevremiz üzerindeki zararlı etkileri önlerken kaynak-

ların korunmasına da yardımcı olacaktır.

• After installing the unit, check to make sure that electrical

equipment such as the brake lamps, turn signal lamps

and windshield wipers operate normally.

• The driver should always stop the vehicle in a safe place

before performing the following action.

– Remote control operation

• Do not use the product for purposes other than on-board

mounting.

Declaration of Conformity with regard

to the EMC Directive 2014/30/EU

Declaration of Conformity with regard

to the RoHS Directive 2011/65/EU

Manufacturer:

JVC KENWOOD Corporation

3-12 Moriya-cho, Kanagawa-ku, Yokohama-shi,

Kanagawa, 221-0022, JAPAN

EU Representative:

JVCKENWOOD Europe B.V.

Amsterdamseweg 37, 1422 AC Uithoorn,

THE NETHERLANDS

English 3

ENGLISH

Parts included

Caution:

Before wiring, be sure to remove the wire from the negative terminal of the battery. After completing all wiring, check the

correct wirings again. After checking, connect the wire from the negative terminal of the battery.

Terminals of Subwoofer

Connecting the remote control unit

Notes:

• Be sure to connect the supplied remote control unit.

• If the cord is not connected properly, the illumination on the remote control unit do not light up.

• Do not insert the remote control connector upside down or forcibly. Otherwise, malfunction may result.

Connection

No. Part Name Outside Shape Quantity No. Part Name Outside Shape Quantity

1Remote control

(5 m / 16 ft) 16Tapping screw

(ø 5 × 16 mm) 4

210-pin connector cord

(5 m / 16 ft) 17Machine screw

(M4 × 5 mm) 4

3Speaker cord

(4.3 m/ 14 ft) 18Machine screw

(M3 × 8 mm) 2

4Fixture A 2

Hook-and-loop fastener

(Double-side adhesive/

for Remote control)

5Fixture B 1

POWER/SPEAKER INPUT terminal

REMOTE terminal

1 Remote control

When the power turns

ON, the illumination

lights.

Lights in blue.

Connect with the lock

part of remote control

jack facing down.

Lock part

Product specificaties

Merk:	Kenwood
Categorie:	Autospeaker
Model:	KSC-SW11
Kleur van het product:	Zwart
Gewicht:	2800 g
Breedte:	190 mm
Diepte:	70 mm
Hoogte:	280 mm
Materiaal behuizing:	Aluminium, Rubber, Steel
Afstandsbediening:	Bedraad
Meegeleverde kabels:	DC
DC voltage input:	14.4 V
Interface:	RCA
Gemiddeld vermogen subwoofer:	- W
Op afstand bedienbaar:	Ja
Soort magneet:	Ferriet
Subwoofertype:	Actieve subwoofer
Frequentiebereik subwoofer:	- Hz
Subwoofer maximale vermogen:	150 W
Line inputs (RCA):	1
Low pass filter:	Ja
Low-pass filterbereik:	50 - 125 Hz