Kaco blueplanet 3.0 NX3 M2 Handleiding

Kaco Batterij-oplader blueplanet 3.0 NX3 M2

Lees hieronder de 📖 handleiding in het Nederlandse voor Kaco blueplanet 3.0 NX3 M2 (71 pagina's) in de categorie Batterij-oplader. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/71
These instructions form part of the product and must be observed. They are available online on our website and correspond to the current
hardware version. The copyright for these application instructions is held solely by KACO new energy GmbH.
Manual
ïź English translation of German original
Authorised electrician
Important safety instructions
Android-APP -APP iOS Installation video
3.0-20.0 NX3
Installation video
Start- up via APP
KACO blueplanet 3.0 NX3 M2
KACO blueplanet 5.0 NX3 M2
KACO blueplanet 8.0 NX3 M2
KACO blueplanet 10.0 NX3 M2
KACO blueplanet 15.0 NX3 M2
KACO blueplanet 20.0 NX3 M2
Legal provisions
The information contained in this document is the property of KACO new energy GmbH. Publication, in whole or in part,
requires the written permission of KACO new energy GmbH.
KACO warranty
You can download the current warranty conditions from the Downloads folder on our website at http://www.kaco-
newenergy.com.
Definitions on product designations
In this manual, the product “Photovoltaic feed- in inverter” is referred to as the device for ease of reading.
Trademarks
All trademarks are recognised, even if not explicitly identified as such. A lack of identification does not mean that a product
or designation/logo is free of trademarks.
Software
This device contains open source software developed by third parties and in some cases licensed under GPL and/or LGPL.
More details on this topic and a list of the open source software used, as well as the corresponding licence texts, can be
found on the associated “KACO NX Setup” APP in the “Info” menu under “Imprint”, “Wi-Fi Stick Licences” and “Mobile APP
Licences”.
Further information
Here you will find additional information for your devices and system applications.
Pocket Guide for
installation
Application Note
Dynamic feedin limit and
blueplanet web public
without datalogger
Application Note
Dynamic feedin limit and
blueplanet web public with
datalogger
Photovoltaic feed in inverter-
Table of contents
1 General information ........................................ 1
1.1 Notes regarding this document .......................... 1
1.2 More information ............................................... 1
1.3 Layout of Instructions ......................................... 1
1.4 Target group ....................................................... 2
1.5 Marking .............................................................. 3
2 Safety .............................................................. 4
2.1 Proper use .......................................................... 4
2.2 Protection features 5............................................
3 Description of the device ................................. 6
3.1 Mode of operation ............................................. 6
3.2 System layout ..................................................... 6
4 Technical data ................................................. 7
4.1 Electrical data ..................................................... 7
4.2 General data ....................................................... 8
4.3 Environmental data ............................................ 8
4.4 Accessories ......................................................... 8
5 Transportation and Delivery ............................ 9
5.1 Scope of delivery ................................................ 9
5.2 Transporting the device 9.....................................
5.3 Installation tool .................................................. 9
6 Assembly and preparation ............................. 10
6.1 Choosing the installation location .................... 10
6.2 Unpacking the device ....................................... 11
6.3 Fastening the mount ........................................ 12
6.4 Installing and securing the device .................... 13
7 Installation .................................................... 14
7.1 General information ......................................... 14
7.2 Surveying the connection area ......................... 14
7.3 Making the electrical connection ..................... 15
7.4 Connecting the device to the power grid ......... 15
7.5 Connecting the PV generator to the device ..... 17
7.6 Creating equipotential bonding ....................... 20
7.7 Connecting the interfaces ................................ 21
7.8 Connecting the Smart- Meter for dynamic feed23
8 Commissioning .............................................. 24
8.1 Requirements ................................................... 24
8.2 Preconditions relating to standards ................. 24
9 Configuration and operation ......................... 25
9.1 Precondition ..................................................... 25
9.2 Initial start- up................................................... 25
9.3 Authorisation .................................................... 26
9.4 Operating system and system configuration .... 26
9.5 Signal elements ................................................ 28
9.6 Connecting to the device .................................. 29
9.7 Menu of the communication unit ....................32
9.8 Additional functions ......................................... 35
9.9 Menu of Inverter .............................................. 38
9.10 Shadow Management ...................................... 41
9.11 Operation mode ............................................... 41
9.12 Enabling functions ............................................ 42
9.13 Performing a firmware update ......................... 52
9.14 Monitoring with “blueplanet web” .................. 54
9.15 in Information on dynamic feed- ....................... 54
10 Maintenance and troubleshooting ................ 57
10.1 Visual inspection ............................................... 57
10.2 Cleaning ............................................................ 57
10.3 Shutting down for maintenance work /
troubleshooting ................................................ 58
10.4 Troubleshooting ............................................... 59
10.5 Error code ......................................................... 59
10.6 Fault during connection set-up and search ...... 62
10.7 Disconn ecting connections ............................... 63
11 Decommissioning and dismantling ................ 64
11.1 Switching off the device ...................................64
11.2 Uninstalling the device ..................................... 64
11.3 Disassembling the device ................................. 65
11.4 Packaging the device ........................................ 65
11.5 Storing the device ............................................. 65
12 Disposal ......................................................... 65
13 Service and warranty ..................................... 65
14 Appendix ....................................................... 66
14.1 EU Declaration of Conformity .......................... 66


Product specificaties

Merk: Kaco
Categorie: Batterij-oplader
Model: blueplanet 3.0 NX3 M2

Heb je hulp nodig?

Als je hulp nodig hebt met Kaco blueplanet 3.0 NX3 M2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Batterij-oplader Kaco

Handleiding Batterij-oplader

Nieuwste handleidingen voor Batterij-oplader