Juwel AquaHeat Pro 200 Handleiding

Juwel Niet gecategoriseerd AquaHeat Pro 200

Lees hieronder de 📖 handleiding in het Nederlandse voor Juwel AquaHeat Pro 200 (7 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 132 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
INSTRUCTION MANUAL
AquaHeat Pro
www.juwel-aquarium.com
1
Introduction
Thank you for choosing a JUWEL Aquarium product.
Our products represent over 50 years experience in the manufacturing of aquariums and their acessories applying most modern
production techniques bringing together the JUWEL Aquarium system, which is both easy to use and simple to maintain.
Please read this instruction manual carefully and completely to make sure you have received all components before setting up
the aquarium. Please observe the safety instructions and maintenance guidelines given in this manual.
This instruction manual has been carefully prepared to provide you with accurate and complete information. All efforts have
been made to ensure that the information given is correct. However, we cannot accept responsibility for printing or other errors.
Technical details are always approximate and are not warranted characteristics and may be subject to change without notice.
This product fulfils the guidelines issued by the European Union (EU) and is therefore entitled to carry the CE mark.
www.juwel-aquarium.de/en/declaration-of-conformity/
SAFETY INSTRUCTIONS:
This appliance can be used by children aged from 3 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
•
The power plugs of the electrical devices must not become moist. Connect
the power plugs to the power supply at such a height that the connection
cable forms a loop which would enable the water to drip down.
•
At all times, only operate the electrical devices for your aquarium (lighting,
heater, pump etc.) using an earth leakage circuit breaker (EL circuit breaker)
with a maximum tripping current of 30 mA. If the socket that you are using in
your home installation is not safeguarded with such a circuit breaker, please
use a commercially available power strip with an integrated earth leakage
circuit breaker.
•
The electrical devices may only be operated in rooms.•
Pull the power plug of all devices operated in water before coming into
contact with the water.
•
2
JUWEL AquaHeat Pro - Installing the heater in the JUWEL filter
system
Installation of the heater without the JUWEL Filter System
Recommendation:
The JUWEL automatic heater warms the water of your aquarium up to 28°C depending on a nomal room temperature of 21°C. If
you keep your aquarium in rooms below this or your fish need a higher temperature, we recommend to purchase a second
heater.
The JUWEL aquarium heater is supplied with the heater holder (fig. 1) which you
will need for the installation.
Please perform the following steps for all JUWEL Aquarium filter systems: (You may
need to start by removing an installed separation wall holder.)
1. Install the heater holder.
2. Attach the heater to the filter housing on the inside of the filter and/or initially insert
the heater holder into the guide rail of the separation wall.
The heater is properly positioned if the heater holder rests on the upper edge of the
housing and/or the separation wall.
The heater is now operational.
In order to allow the installation of the JUWEL Aquarium Automatic Heater we have
provided suction cups together with the heater.
First of all please attach the suction cups to the heater tube.
Thereafter, fasten the heater to the glass pane of your aquarium and check that it is
safely positioned.
You achieve the best result if you remove some of the water from the aquarium
beforehand and clean that part of the glass pane to which you wish to fasten the
heater. Please ensure that the heater is positioned in such a way that the heater
head is above the water level.
Having installed the heater in your aquarium you may refill it again and connect the
heater to the power supply.
Please observe that the heater may be damaged irreversibly, if it is operating
without or in an insufficient level of water.
3


Product specificaties

Merk: Juwel
Categorie: Niet gecategoriseerd
Model: AquaHeat Pro 200

Heb je hulp nodig?

Als je hulp nodig hebt met Juwel AquaHeat Pro 200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Juwel

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd