Jung CD1790DWW Handleiding

Jung Bewegingsdetector CD1790DWW

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Jung CD1790DWW (13 pagina's) in de categorie Bewegingsdetector. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/13
LB management
LB management
LB management
LB managementLB management
Motion and presence detector
Motion and presence detector
Motion and presence detector
Motion and presence detector
Motion and presence detectorMotion and presence detector
Art. no.: DWPM17360WW
Motion and presence detector
Motion and presence detector
Motion and presence detector
Motion and presence detectorMotion and presence detector
Art. no.: DWPM17360AL
Operating instructions
Operating instructions
Operating instructions
Operating instructionsOperating instructions
1
1
1
11 Safety instructions
Safety instructions
Safety instructions
Safety instructionsSafety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
Danger of electric shock. Always disconnect before carrying out work on the device or load. InDanger of electric shock. Always disconnect before carrying out work on the device or load. In
so doing, take all the circuit breakers into account, which support dangerous voltages to the
so doing, take all the circuit breakers into account, which support dangerous voltages to the
so doing, take all the circuit breakers into account, which support dangerous voltages to the
so doing, take all the circuit breakers into account, which support dangerous voltages to theso doing, take all the circuit breakers into account, which support dangerous voltages to the
device and or load.
device and or load.
device and or load.
device and or load.device and or load.
Danger of electric shock. The device is not suitable for disconnection from supply voltage. De-
Danger of electric shock. The device is not suitable for disconnection from supply voltage. De-
Danger of electric shock. The device is not suitable for disconnection from supply voltage. De-
Danger of electric shock. The device is not suitable for disconnection from supply voltage. De-Danger of electric shock. The device is not suitable for disconnection from supply voltage. De-
pending on the insert used, the load is not electrically isolated from the mains, even when the
pending on the insert used, the load is not electrically isolated from the mains, even when the
pending on the insert used, the load is not electrically isolated from the mains, even when the
pending on the insert used, the load is not electrically isolated from the mains, even when thepending on the insert used, the load is not electrically isolated from the mains, even when the
device is switched off.
device is switched off.
device is switched off.
device is switched off.device is switched off.
Do not press on the sensor window. Device can be damaged.
Do not press on the sensor window. Device can be damaged.
Do not press on the sensor window. Device can be damaged.
Do not press on the sensor window. Device can be damaged.Do not press on the sensor window. Device can be damaged.
The device is not suitable for use as a burglar alarm or other alarm.
The device is not suitable for use as a burglar alarm or other alarm.
The device is not suitable for use as a burglar alarm or other alarm.
The device is not suitable for use as a burglar alarm or other alarm.The device is not suitable for use as a burglar alarm or other alarm.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.These instructions are an integral part of the product, and must remain with the end customer.
2
2
2
22 Device components
Device components
Device components
Device componentsDevice components
Figure1: Device components
(1) FMinsert
(2) Sensor top
(3) Brightness sensor
(4) Button Bluetooth
Bluetooth
Bluetooth
BluetoothBluetooth Ζ©
(5) Sensor window and status LEDs
(6) Decor ring
1 / 13
82599323 25.10.2019
J0082599323
LB management
LB management
LB management
LB managementLB management
Motion and presence detector
(7) Push-on cover
Status LED
Status LED
Status LED
Status LEDStatus LED
Red LED lights up Self-test
Red LED flashes 3 s on / 3 s off Alarm function active
Red LED flashes 0.5 s on / 0.5 s off Alarm was triggered
Red LED flashes three times followed by a 1 s
pause
Cover was previously connected to another in-
sert
Yellow LED lights up "Off" or "Off for 0.5 - 5 hours" function active
Yellow LED flashes Presence simulation active
Green LED lights up "On" or "On for 0.5 - 5 hours" function active
Blue LED lights up Device is coupled with a mobile end device
and active app
Blue LED flashes 0.5 s on / 0.5 s off Bluetooth coupling mode active
3
3
3
33 Intended use
Intended use
Intended use
Intended useIntended use
– Automatic switching of lighting depending on the heat motion and ambient brightness
– Operation with flush-mounted insert for dimming or switching or 3-wire extension from LB
management
– Ceiling installation on flush-mounted insert.
Product characteristics
Product characteristics
Product characteristics
Product characteristicsProduct characteristics
Functions directly on the cover
– Extension of the detection area in combination with 3-wire extension
– Operation with 2-wire or 3-wire extension, rotary dimmer extension or push-button
– Dimming light via extension with dimming insert
– Resetting to factory setting
– Push-on cover for limiting the detection field
Functions via app
– Setting the device as presence detector or motion detector
– Setting the switch-on threshold
– Separate adjustment of the sensitivity of the three PIR sensors
– Setting the run-on time
– On or off
– On or off for 0.5 - 5 hours
– Switch-off warning
– Dynamic run-on time
– Presence simulation
– Alarm function
– Timer function
– Walking test
In combination with a switch insert
– Pulse operation
In combination with a dimming insert
– Switch on with last saved brightness or saved switch-on brightness
– Adjusting the minimum brightness
– Adjusting the maximum brightness
– Hotel function
2 / 13
82599323 25.10.2019
J0082599323
LB management
LB management
LB management
LB managementLB management
Motion and presence detector
– Night light function
– Constant light regulation
Automatic operation
Automatic operation
Automatic operation
Automatic operationAutomatic operation
The device detects heat motions of people, animals and objects.
– The light is switched on if a person enters the detection field and the brightness threshold
is below the set brightness threshold.
– The run-on time restarts with each detected motion.
– The light is switched off, if:
no more movement is detected in the detection field and the run-on time has elapsed or
the ambient light is too bright and the run-on time has elapsed.
To avoid any switch-on caused by a cooling illuminant, no movement signals are evaluated for a
brief lockout time after switching off. The motion detector adjusts itself to the ambient conditions
to keep the time as short as possible.
Behaviour after a mains voltage failure
Behaviour after a mains voltage failure
Behaviour after a mains voltage failure
Behaviour after a mains voltage failureBehaviour after a mains voltage failure
After mains voltage return, the device performs a self-test for a maximum of 20 seconds. After
the self-test has been completed, the device is ready for operation.
If the red status LED flashes three times at repeated intervals, the cover was previously
connected to another insert. To enable the function again, either place the cover onto the
respective insert or press the Bluetooth button (4) for longer than 4 seconds.
The following applies during the self-test:
– The red status LED is illuminated.
– The load is switched off.
– Movements are not detected
– The device can be operated via extensions
4
4
4
44 Commissioning
Commissioning
Commissioning
CommissioningCommissioning
Install app on a mobile end device
Install app on a mobile end device
Install app on a mobile end device
Install app on a mobile end deviceInstall app on a mobile end device
Requirement for operation via app is a mobile end device with Bluetooth interface, running the
Android operating system or iOS.
οΏ­ Download and install the Clever Config app from the iTunes App Store (iOS) or Google
Play Store (Android).
Couple mobile end devices via Bluetooth
Couple mobile end devices via Bluetooth
Couple mobile end devices via Bluetooth
Couple mobile end devices via BluetoothCouple mobile end devices via Bluetooth
Precondition: insert and cover must be ready for operation. The mobile end device is located
close to the cover.
οΏ­ Activate coupling mode: Press the Bluetooth
Bluetooth
Bluetooth
BluetoothBluetooth button (4) (Figure 1) for more than 4Ζ©
seconds.
The blue LED flashes. The coupling mode is active for one minute.
οΏ­ Start the Bluetooth app and search for device to be coupled.
Cover is coupled with the end device and shown in the app.
The coupling mode is automatically exited after successful coupling. The blue LED lights
up to confirm an active connection.
A maximum of 8 mobile end devices can be coupled with a cover. When coupling the 9th
device, the oldest device will be deleted.
5
5
5
55 Operation
Operation
Operation
OperationOperation
The app is used for the configuration and operation of the device. Some basic functions can
also be operated via connected extensions.
3 / 13
82599323 25.10.2019
J0082599323

Product specificaties

Merk: Jung
Categorie: Bewegingsdetector
Model: CD1790DWW

Heb je hulp nodig?

Als je hulp nodig hebt met Jung CD1790DWW stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Bewegingsdetector Jung

Jung

Jung BTLC17181244 Handleiding

23 Augustus 2024
Jung

Jung BTLC17182250 Handleiding

23 Augustus 2024
Jung

Jung BTLC17181255 Handleiding

23 Augustus 2024
Jung

Jung BTLC17182259 Handleiding

23 Augustus 2024
Jung

Jung BTLC17181224 Handleiding

23 Augustus 2024
Jung

Jung BTLC17181219 Handleiding

23 Augustus 2024
Jung

Jung BTLC17181217 Handleiding

23 Augustus 2024
Jung

Jung BTLC17181213 Handleiding

23 Augustus 2024
Jung

Jung BTLC17181233 Handleiding

23 Augustus 2024
Jung

Jung BTLC17182235 Handleiding

23 Augustus 2024

Handleiding Bewegingsdetector

Nieuwste handleidingen voor Bewegingsdetector

Optex

Optex FLX-A Handleiding

16 December 2024
Optex

Optex FLX-P Handleiding

16 December 2024
Optex

Optex FLX-S Handleiding

16 December 2024
Optex

Optex SIP-3020WF Handleiding

16 December 2024
Optex

Optex SL-350QDM Handleiding

16 December 2024
Optex

Optex SIP-100 Handleiding

16 December 2024
Hikvision

Hikvision DS-PI-T150 Handleiding

8 December 2024
Hikvision

Hikvision DS-PI-T100 Handleiding

8 December 2024
Hikvision

Hikvision DS-PI-D80 Handleiding

8 December 2024
Optex

Optex HX-80N Handleiding

5 December 2024