Jolin Agogo Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Jolin Agogo (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
AGOGÔ
stream of gates
AGOGÔ is a pack of 8 vactrol low pass gates in open design configuration.an
why
To bongo.
To enhance and enrich a weak audio source.
To create sub-mixes of up to 8 inputs.
To send a single source to many outputs and modulate each one of them individually.
with
Multiple fixed waveforms use the individual LPGs as a CV scanner.
Stereo sources control them with a single CV input.
EOC pulses and triggers this is where it gets percussive.
Slow modulations take advantage of those vactrols and their natural decay.
how
"I", the inputs row is normalized from top to bottom.
An input inserted in the first socket will be copied unaltered to the next one.
If a jack is plugged in will break the normalization. it
"V" is for control voltages and they cascade the same way as the inputs
following to natural decay of the vactrol response. All the can be opened LPGs
simultaneously with a single CV source. Combining the features of both "I" and
"V" rows you can control a signal with 8 different CVs or 8 different sources with the same CV.
"O" stands for outputs. They act as an active mixer letting you combine up to 8 signals. As in the previous two
rows, the connection can be interrupted in any given point to create sub mixes or individual outputs.
Since we are actively summing copies of the original input, each stage will saturation to the final outLPG add .
Thanks to the open design path and normalizations this is just an additional feature: all the LPGs can still be used
individually or in multiple combinations for multichannel effects or other creative application. More AGOGÔs
can be chained together thanks to headers on the back to multiplicate the number of inputs/outputs.
features
8 independent vactrol . LPGs
Classic logarithmic vactrol curve and latency.
Two LPG flavours: brighter blue LEDs and darker red LEDs. – –
Open design signal path: break the normalization any point to change its configuration. at
Input and CV are normalled and they flow top to bottom when no jack is inserted.
Outputs are summed to create sub-mix on the . go
Unlimited units can be chained together.
Works with audio and CV sources.
hatever” don’t W power connector a.k.a. mind the polarity (from V1.2).
specs
current draw +12V 150 , -12V ma 90ma
dimensions width 6HP, depth 28mm
Demos and build documentation at jolin.tech/agogo
to chain more units together
Connect the OUT header at the bottom of the module to the IN header of the next one located on top of the next one .
Remember to not twist the cables: if a color is at pin 3 of the header, it should be at pin 3 of the next module header1.
Refer to this picture if you have any doubts:
The OUT header of module 1 is connected to the IN header of module 2 and the OUT header of module 2 is connected to IN header
of module three.
green board version V1.0 V1.1
Red line -12v goes at the bottom.
1 2 only: the 3 pin header is reversed. The cable needs to be connected twisted.V1. output
OUT
IN
1
2
3


Product specificaties

Merk: Jolin
Categorie: Niet gecategoriseerd
Model: Agogo

Heb je hulp nodig?

Als je hulp nodig hebt met Jolin Agogo stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Jolin

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd